Chapter 54:

National News Office, reporters gathered at 2pm.
What is the purpose of this press office to assemble the media? The reporters who came to the press conference speculated.
General News Office convenes reporters. In addition to announcing the country's new policy, it is to explain some major issues that the public cares about, or to express official views on the focus of various aspects of the domestic economy.
The press office is almost the mouthpiece of the country, and every move affects the nerves of domestic and foreign media.
到底 What did the Press Office do today? All the reporters were not hinted, they were very curious.
For a while, the director of the press office, led by a group of people, sat at the press desk. Rose was a little nervous and sat down with Tan Lin.
After the crowd sat down, the reporters started snapping photos. Ross wanted to be low-key, but there was no way to become the focus of the public again. Among a group of old men, he seemed too young. It was difficult for a teenager to sit in front of the podium of the National Press Office.
I used to find a job. His age was a bruise to Rose. Today his age has become his advantage.
Many reporters are already guessing privately, who is this little guy? Why can we sit with senior leaders of the Ministry of Science and Technology, Industry, Commerce, and Defense?
When the reporter guessed that Rose, a middle-aged man in glasses and a suit came to the podium.
"Mr. Ladies and gentlemen. Dear friends at home and abroad, today we press office to announce an important news. There is a private enterprise in China that masters an advanced bearing production technology. This type of bearing is called a special bearing. The service life and performance will completely surpass similar products. Bearings are indispensable parts in the machinery industry. This technological breakthrough will fill a gap in our industry. From now on, China will no longer need to import foreign Bearing. Below is Mr. Tan Lin, Chairman of Lihua Company, and I will speak for everyone. Please welcome him with warm applause. "
There was applause all around the stage, and the focus of the reporters was on Tan Lin.
Tan Lin has seen a lot of scenes, the aura is enough, facing so many reporters, without the slightest stage fright, he smiled and walked calmly to the stage.
"Good afternoon, ladies and gentlemen. I am Tan Lin, Chairman of Lihua Co., Ltd. Our company has been operating bearings for 30 years. In these years, I have witnessed the rise and decline of the bearing industry. Machinery, as well as automobiles, the advanced bearings required are all imported. The quality of domestic bearings is not as good as foreign products. The price is much cheaper than abroad. The annual turnover of China's bearing market is about 200 billion yuan. Although the market is large, profits are very thin The biggest profit was made by foreign bearings. The company that used to run the bearing business with me has fallen down, I can't remember. "
"Do n’t underestimate the bearing component. Its quality is directly related to the life of the machine, such as cranes, excavators, automobiles .... With bearings imported from abroad, the life of the machine will be longer than that of domestic bearings. Years. As a bearing person, I have the responsibility to contribute to the national industrial progress. So, in order to change the situation of domestic bearing backwardness, our Lihua company has been investing in the development of bearings with performance and quality that meet international standards. Today, I finally I am glad to tell you that our Lihua company has finally made a breakthrough in this technology after unremitting efforts. "
"Our Lihua company has produced world-class special bearings, or it can be said to be super-class special bearings. The hardness of our bearings has reached over 85 Rockwell hardness, which is more than twice the hardness of ordinary bearings. If its quality is according to international V4 By standard, at least it has reached the V6 standard. Its life is almost twice that of ordinary bearings. Its rust prevention ability is lifetime rust prevention. Our special bearings can withstand high temperatures exceeding 20% ​​of ordinary bearings. Adopt Lihua Company Special bearings, even if a car runs 30,000 kilometers, the bearings will not have any wear and tear. Using our bearings, the life of machinery such as excavators, cranes, forklifts, etc. will be extended by at least five years. "
各位 "Dear friends, our company's products have the highest quality in the world. If our company's bearings have any quality problems. We promise to compensate consumers at ten times the price. Thank you!"
After Tan Lin introduced the product and advertised the bearing, he bowed to reporters and was about to step down. Groups of reporters raised their hands to ask Tan Lin questions.
The director of the Press Office and the other big guys smiled and nodded to Tan Lin, indicating that he could continue to answer questions from reporters.
In desperation, Tan Lin had to stay on the stage.
"Miss reporter, please ask a question."
A good-looking female journalist with glasses and long hair fluttering stood up.
"Mr. Tan, I'm a reporter from CCTV Technology Channel. I'm very glad to meet you. First of all, thank you for your contribution to the national industry of private enterprises. Secondly, I want to ask you a question."
Tan Lin smiled: "This lady please ask questions."
"Mr. Tan, if I guess correctly, the quality of the bearing has the most direct relationship with the quality of the steel. Have you made breakthrough progress in the cold heat treatment of steel? If your company has really overcome it The technology related to cold heat treatment is a remarkable feat. We can also apply this technology to other steels to improve the quality of national steels as a whole. "
CCTV science and technology channel reporter's question made Tan Lin a bit difficult. After a pause, Tan Lin explained: "Thank you for this reporter's question. In fact, our bearings are indeed made of good quality steel. This steel Technology is a secret and it is not convenient to tell everyone. After all, we have the intellectual property of these technologies. "
"Mr. Tan, you are more concerned, just need to answer if you have more advanced cold heat treatment technology. This will not leak your company's technology."
"I……."
Tan Lin knew nothing about special steel, and now was asked by a female reporter ~ EbookFREE.me ~ Now he can only look up at Rose.
He Ross nodded his head, indicating that Tan Lin could answer the reporter.
Tan Lin relaxed a little: "I can tell this reporter friend. The quality of the special steel we have developed has nothing to do with cold heat treatment."
Many reporters on the stage shook their heads: "This is impossible. The quality of all steel is related to cold and heat treatment."
Tan Lin's answer immediately attracted the doubts of many reporters at the scene.
"Mr. Tan, please ask, what technology do you use to improve the quality of steel?"
The reporters at the scene were very interested and raised their hands.
"It's over, how can I explain, this technology is not mine."
林 Tan Lin suddenly sweated, looking for help at Rose.
He did not want to be annoyed by the reporter, he turned his head to the side and ignored Tan Lin's help.
"Mr. Tan, please explain!"
The reporters on the stage scammed.
"I ... I ... I don't hide it. This technology was developed by the little genius Rose. If you have any questions, please ask Mr. Rose, a genius who is the most outstanding genius in the world. "
Tan Lin couldn't answer the technical question at all. In order to avoid going out in public, his heart was overwhelming, and he ran down and simply left the question to Rose.
"I rub! Tan Lin, you betrayed me."
Rose couldn't laugh or cry. She wanted to be low-key. Now she can only appear in front of the public. Rigidly, Rose came to the stage.
Pap, pap, pap, all the cameras, madly shot at Ross ~ EbookFREE.me ~ Welcome the book readers to read, the latest, fastest and hottest serial works are at ~ www.mtlnovel. com ~ mobile users, please read.