Vol 9 Chapter 599: test

Zhao Hai thinks that it is a great thing to use the steam machine to create a unique civilization that belongs to them. But because of the existence of the Mother Church, the motivation to advance them is suppressed, and he has to do now. It is to push gently on the back, to push down the mountain of the goddess church in the steel industry, and then how to develop the steel industry, they see their own efforts.
Of course, things have to be done step by step. Zhao Hai is actually only proposing his own opinions. He has not personally used it. Even the new vaporization array and the steam liquefaction array are all made by those who will forge. Zhao The sea did not start, he just provided some drawings.
However, this also allowed Zhao Hai to see the efficiency of the people here in the steel industry. The efficiency of their work here is really high. Zhao Hai gave them drawings. Those people have already made it in just one day. A new, small pressurized cabin was produced. This pressurized cabin was completely made according to Zhao Hai’s drawings. Zhao Hai inspected and did not have any problems. This made Zhao Hai very happy, but the sky was no longer Early, he decided to test the pressurized cabin tomorrow.
He let the workers go to rest directly. They also went to rest in the room. After preparing for the test of the pressurized cabin tomorrow, they were allowed to make a new steam gun and a new pressurized cabin. The steam gun must also be improved, and the bullet must be improved. Otherwise, there is no point in making a new pressurized chamber.
So after Zhao Hai returned to his room, he began to draw drawings again. What he didn’t know was that Will had already reported the news of Zhao Hai’s new pressurized cabin to Karl Wei. I know, but he also said that the new pressurized cabin has not been tested yet.
Carl Witt was very excited after receiving the letter from Will. He was really happy. He didn't think that Zhao Hai had already scored so quickly. This is definitely a for him. Good news, but he still didn't bother Zhao Hai. He decided to wait. After Zhao Hai had some results, he was not too late to see Zhao Hai.
The next morning, Zhao Hai, after eating breakfast, came to the backyard once, and then Zhao Hai let people directly take out the pressurized cabin that was made yesterday. Mark they all went to the backyard here. They also want to see what happens to Zhao Hai’s test results.
This time the test is to see if the pressurized chamber can automatically adjust the pressure. This test will be carried out in other pressurized cabin factories, but other pressurized cabin factories will do the test. Compressive chamber compression test, that is, they let the pressurized chamber continue to pressurize, but do not vent pressure, look at what degree of compression chamber is added, will explode, this is actually a kind Test to verify the quality of the pressurized compartment.
This kind of test is actually very simple. In order to ensure the normal operation of the pressurized cabin, they will connect a thick tube on the pressurized chamber. This tube is very thick and has a strong compressive capacity. There is no pressure relief port, then the pressurized chamber will pressurize the tube continuously, and the steam added to the tube will return to the pressurized chamber once.
Here, in the steel industry, there is a very clear regulation on the pressure in the pressurized cabin. The small pressurized cabin like the steam gun is the smallest one. The pressurized cabin can withstand up to three. The pressure of pressure, and the large steam boiler like the one used on the ship, can withstand up to a thousand or more pressure.
The workers who make the pressurized cabins are all veterans in this area, so they do these things and do it well. Soon they have already prepared for the test, and the pressurized cabin is placed in the square. In the middle, the external pipe is also connected. In the middle of the pipe, there is also a disc-shaped pressure gauge, mainly to pay attention to the pressure change in the pressurized cabin.
After everything was done, they immediately started the pressurized cabin. Zhao Hai did not improve the start of the pressurized cabin, or started it with mechanical force. After the startup started the pressurized cabin, it ran away. Everyone is paying attention to the pressurized cabin. There is a slight vibration in the pressurized cabin. Because they are far away, the words on the pressure gauge are still invisible. They are afraid of danger, so they are far away.
The pressurized cabin made according to the general factory system, if it is not reduced, it will explode if it is pressurized for fifteen minutes or so, but now it is not the same. They stare at the pressurized chamber for half an hour. The pressurized cabin is still the same, without any change, which makes everyone's eyes shine.
Zhao Hai looked at them and smiled. Then he went straight to the pressure gauge and looked at the pressure gauge. The value on the pressure gauge was still fairly calm. After too much pressure, It will not increase. On the contrary, there will be some reduction. When it is reduced to a certain degree, it will increase. Repeatedly, the pressurized cabin can work normally, and the pressure in the pressurized cabin will remain at the same time. A very stable area, which represents this new pressurized cabin, has been tested successfully.
Zhao Hai gave a sigh of relief. Then he turned his head and glanced at the workers. Then he smiled slightly: "You, success, the pressure in the pressurized cabin, now fluctuates between 2.5 and 3, when the pressure reaches three. At that time, the pressure will not increase. When the pressure is less than 2.5, the pressure will increase once. Everyone, our test is successful."
As soon as Zhao Hai said that the workers were all cheering, they all ran to the pressurized cabin and stared at the pressure gauge. For a while they were cheering again. These people have been dealing with the pressurized cabin. Of course, they are very clear. The pressure of the pressurized cabin can be controlled. It is okay to say that the pressure of the pressurized cabin can be adjusted by itself. This will be a quality for the steel industry here. leap.
Mark, these people, are somewhat unclear about this. They don’t quite understand what it means, but they are so happy to see those people. They also know that this matter must be very important to those people. They can’t help but Zhao Hai was somewhat impressed, and it seems that Zhao Hai is really a bit of a skill.
After Zhao Hai and other people calmed down, he said to everyone: "Well, everyone is still busy today. The next step is the production of weapons. Come, this is a new drawing. Everyone takes the past. Figure to make it." Those people immediately responded, then took Zhao Hai's drawings.
Seeing Zhao Hai’s drawings, they are a glimpse, because there are several kinds of weapons on this drawing, there are tomahawks, long swords, stabbing swords, and even staff. The difference is that this weapon will even There is a pipe, and the pipe is connected to the pressure chamber, and the pipe is also different. The pipe is not very thick, and it is written on it. The thinner the softer the better, the most important thing is that the pipe surface It looks like one, but it is actually two. One pressure is the steam outlet and the other is the steam inlet. That is to say, this pipe will put the steam back into the pressurized chamber.
These jobs were made in the pressurized cabin yesterday. Of course, they know why Zhao Hai did this. They know the interfaces of the two pipes, and what is going on inside the pressurized cabin. They also know that in the cabin. I can't see anything outside, I only see a rounded square pressurized cabin. In fact, the changes in the pressurized cabin are still very large. First of all, there is no limit on the outlet of the pressurized chamber, but the pressure is there. The water in the cabin can only be pressed to about two-thirds. Otherwise, if there is too much water, less steam will be generated, which will affect the use of the pressurized cabin.
In the inlet port of the pressurized cabin, it is directly connected to a metal pipe. This metal pipe is turned in a ring in the pressurized chamber, and the outlet is at the bottom of the pressurized tank, that is, into After the steam in the steam port becomes liquid, it flows through the pipe and flows back to the bottom of the pressurized tank, so that it does not have any influence on the steam in the pressurized tank.
At the same time, there is a waterproof design at the steam outlet of the pressurized cabin, so that the pressurized tank is turned upside down, the water will not block the steam outlet, and the water pipe at the steam inlet is also protected. The backflow device, that is to say, there is no way for the fluid to flow back from there, and the steam has the same way to enter the steam inlet from the steam inlet. It can be said that this new pressurized cabin is considered very thoughtful, and the average person carries this plus. Ballast, even if it is a jump up and down, the previous pressurized cabin can not do this. If the pressurized cabin was put upside down, it must be relieved of pressure, then restarted and repressurized. Only then, all these problems have been solved.
Because of this, Zhao Hai gave the drawings of the workers. They immediately understood them. When they read the drawings, they understood what Zhao Hai was going to do. They did not say anything and immediately did it. After Zhao Hai gave the drawings to them, he went straight back to his room. He still had a lot of things to do, and there was a lot of information to be reorganized.
At the same time, Will also told the news to Karl Witt. When Karl Witt received the report, he immediately got excited. He immediately called all the other members of the trade union together and notified this. Some other members are also very excited. They are very clear that this new pressurized cabin will bring a new revolution to the steel industry.
After Zhao Hai returned to the study, he began to draw drawings. The drawings he needed to draw this time were some large-scale machine drawings. In fact, Zhao Hai now has drawings of steel couples, and even a steel couple. Taigang is still brand new, and Zhao Hai has also studied this steel couple.
It is precisely because of seeing this steel couple, Zhao Hai is so confident in the steel industry, because the shock of this steel doll to Zhao Hai is really great, this steel is occasionally ten meters high, all over the body It is made of metal. In the chest space of the steel couple, the steel ring is controlled. The power of the steel couple is a steam pressure chamber. Of course, his pressure chamber is large, there are several kinds of weapons, and there are steam guns. , small steam cannon, and a giant sword, to be honest, when I saw this steel couple for the first time, Zhao Hai was really shocked. He really couldn’t imagine it. How can a civilization like the steel industry make it? It is too strange that this kind of weapon comes out of the steel.