Chapter 281: Beating

High-speed rail milling cutters are used to maintain high-speed rails, because trains will wear during operation. Not only will the geometry of the rail heads of the railway rails change, but also defects such as wave abrasion, fish scale injuries, and fat edges on the rail surface. Must be promptly and scientifically conserved.
If the rail is not maintained in time, it will directly affect the stability and comfort of the high-speed rail when running, and affect the life of the rail. More importantly, there will be hidden safety hazards, and the higher the speed of the high-speed rail, the more the rails will lose The bigger it gets, let alone the security risks.
Therefore, as Huaxia, which has such a high rate of high-speed rail coverage, rail maintenance is a little-known, but in fact the most important step, but unfortunately, China ’s core equipment for high-speed rail maintenance, the milling cutter, Chinaxia, can only rely on imports, and Chinaxia The development of the milling cutter is very backward.
Although the milling cutter is not as complicated as the chip looks, the research and development of the milling cutter itself has natural difficulties, because the milling cutter is a super-hard alloy material. In fact, Huaxia has dismantled the imported milling cutter many times. The materials inside are already well understood, but I don't know how to make such a milling cutter from these materials.
I can give you an example. There is a Chinese medicine that can cure a certain disease. Now I tell you which medicines I use, but the ratio of the medicine, the time of preparation, and the way to make it. I wo n’t even tell you if there is any medicine. Let's study it yourself. How long does it take to research?
It is no exaggeration to say that there are countless possibilities. Therefore, the research and development method of Huaxia is two roads. One is to completely research and develop from scratch. The other is to make continuous experiments based on the materials of imported milling cutters. However, no matter which way you go, you will fail again and again. Try it again and again, burn money once, but on what day can you make it, and how much money will you burn? No one knows. This is a bottomless pit.
"If I remember correctly, our milling cutters are mainly imported from Austria?" Liu Fan asked.
"Yes." Xu Jing nodded. "I just went to understand the situation. Originally, there were substitutes in Germany, but they don't seem to be willing to give us kindness."
"Austria has always been friendly towards us. This time, it should be that some companies are being stunned. As for Germany, I heard that they have always wanted to kill our Mulong technology." Liu Fan indifferently turned Handed it back to Xu Jing, turned to look at He Lin, "Let President Guan come to see me."
...
Xu Jing got the news quickly. After a while, the news that the high-speed rail milling cutter was about to be restricted spread on the Internet. Since Huaxia was strong, various restrictions have not been broken, coupled with the tension caused by Mulong Technology, so the news of restrictions is likely to attract wide attention from netizens.
But this time, everyone ’s response was a little bit slower, because all along, when it comes to technology being necked, everyone can think of either chips or systems, and on the surface, people always think that it ’s chips and systems that are really passive. So everyone is familiar with the chip and system.
However, a relatively unpopular thing like a milling cutter, we don't know what it is, let alone how much technical content this thing has, and what the consequences will be if it is restricted.
There is not much content even on the Internet to search for railway rail milling cutters. The information is relatively low-end milling cutters from other industries. However, after the industry insiders gave everyone the popular science online, the netizens showed a very uniform response. , I bought a watch last year!
What is the high-speed rail? The high-speed rail is the face of Huaxia. The chip and the system are also very good. In the past, others used the chip and the system to engage us. It did indeed fist to the meat, knife and heart, and even we were breathless. Come.
This time, the impact of the milling cutter may not be as serious as the original chip system, because some experts said that we would not be able to maintain it in a more backward way, that is, the efficiency will be much lower, the cost will be several times higher, and it may be forced to reduce speed. But at least there is a retreat.
However, with the high-speed rail operation, this is humiliating!
You can fight, you can break your arms and legs, but you can't hit your face! This is the rule of the rivers and lakes, this is the bottom line!
Those foreigners don't understand a truth. In Huaxia, face is more important than life!
So at this moment, the anger of Chinese users was completely ignited. There is a lot of bad words on the Internet, and obviously everyone has lost some sense.
But sometimes think about it, people's slaps are fanned to your face, what's wrong with irrationality, blood is impulsive, and people should have some blood.
In addition to anger and condemnation, another voice online is naturally to find a solution.
"How about a Chinese milling cutter manufacturer? How many years have passed without any progress? It just came out! The rabbit family can't be bullied!"
"What to do if the milling cutter is really gone? There is no way but to grind it with a backward abrasive belt? The Huaxia high-speed rail cannot fall!"
"Are there any countermeasures? Teach Austria and Germany to be human beings. This cannot be over!"
"How much does it cost to make a milling cutter? I am personally willing to donate one year's wages. If I can contribute a cent, I will definitely not let them succeed!
"We can make even chips and systems. We can't keep up with milling cutters here. Huaxia enterprises come on. I believe in miracles. I wait for miracles. Miracles must be there and they must be red!
Of course, this time is definitely indispensable.
A lot of comments came out of Mulong Technology Weibo.
"Liu Yitian, come to business ~ EbookFREE.me ~ come out to pick up customers!"
"Is the milling cutter within Mulong's business?"
"Liu Yuntian, the rabbit's face was beaten, what to do?"
...
There are also some kind honest people.
"I hope that everyone will not kidnap Liu Fan morally, and Mulong Technology may not be almighty. This milling cutter is also related to Mulong Technology. Mulong Technology cannot manage this. Please don't disturb Liu Fan again. "
The people who call this comment are honest people, because in fact few people actually come to kidnap Liu Fan morally, everyone just, habitually think of Mulong Technology at this time, but this thing Mulong Technology can't do Now, you ca n’t really blame Mulong Technology, it ’s not an intellectual disability.
As more and more comments were made, netizens suddenly froze, and underneath the honest message, it seemed that they saw the reply of Mulong Technology's deity.
I saw Mulong responded underneath the honest man, "Who do you look down on?"
When everyone was so aggressive about Mulong Technology's response and even suspected high imitation, Mulong Technology turned on the crazy reply mode and responded to everyone's message next.
"Liu Yitian, here is the business, come out to pick up the guests!"
"Brother!"
...
"Is the milling cutter within Mulong's business?"
"You can learn more about Mulong Technology's Smart + Plan ~~"
...
"Liu Yuntian, the rabbit's face was beaten, what to do?"
"Call back !!!"
...
With more and more replies from Mulong Technology, everyone immediately understood Liu Fan's disdain for who turned out to be a joke.
Today's Mulong Technology, a batch of leather.
But everybody understands the confidence in this skin.
Mulong Technology seems to manage this!