Vol 3 Chapter 953: mass production

Chu Jungui's original answer is mass production, but Kaitian's idea is also very interesting, especially for this primitive race that also worships the totem pole, pretending to be a ghost may also have a miraculous effect. It is very simple for Kaitian and Chu Jungui to get some light and shadow effects to disguise miracles. Although Kaitian is now thin, it is still no problem to get a ten-meter-high laser projection.
But after careful consideration, Chu Jungui gave up this somewhat tempting idea. The reason is also very simple, the other party is not only a primitive religion, but also a true god. The monster that appeared in the illusion was completely up to the standard of a true of an indigenous tribe.
Therefore, Chu Jungui still implemented the original plan and started to work according to Kaitian. He first picked up two high-strength alloy ingots, heated them with bare hands, cut them into small pieces of different sizes, and then threw them to Kaitian, while passing a complete set of design drawings.
The cut alloy blocks were placed vertically, and the sky turned into a fog. They were all wrapped in one breath. Then, in the fog, the alloy blocks began to slowly change shape, gradually transforming to a specific shape. What Chu Jun gave to Kaitian was a set of tool kits including various cutting tools and drills. If you want mass production, you must first have tools.
This high-hardness alloy contains a large amount of titanium, and it is very difficult to chew on it even in the open sky. Fortunately, Kaitian can process the entire set of tools at the same time. The fastest one takes only 3 minutes, and the slowest takes 51 minutes.
When Kaitian was fighting with a complete set of tools, Chu Jungui started the second step before mass production: energy. Energy includes both for machines and energy for biological maintenance activities.
Chu Jun returned to the small highland, ran to a small tree with the thickness of the mouth of a bowl, chopped it down with an axe, and then chopped down two small trees on the left and near, and carried them back to the camp together.
Originally, cutting wood was Kaitian's strength, but now Kaitian was dealing with tools, Chu Jungui did it himself, using a hacksaw to saw the logs into sections of half-meter-long firewood. Chu Jungui's strength is far beyond that of ordinary humans. The speed of the hacksaw is comparable to that of a chainsaw, and it only takes one minute to process three pieces of wood.
Chu Jungui filled some of the firewood into the heat stove and started to generate electricity. Then he raised a bonfire, set up a bucket pot filled with water, and began to boil the water. While boiling water, Chu Jun returned and picked leaves. He shot out the electricity, and he could hardly see the shadow of his hand, and his fighting skills as high as 24 were also easy to use for picking leaves. The branches and leaves of the three trees were all separated, and it took 3 minutes.
He rubbed the leaves and threw them into a large pot, and then smashed the wild vegetables, dried fruits and animal meat found in the ape and monster village, threw them into the pot, and boiled them on the fire. The bucket pot is 60 centimeters in diameter and one meter high. When this big pot is cooked, the heat must have a hundred thousand kcal.
The meal was already cooking, and Chu Jungui went to chop down three trees again, and this time he deliberately picked a tree with excellent toughness. After returning to the camp, Chu Jun returned the axe like flying, and a square piece of wood took shape in a blink of an eye. Then he picked up the hacksaw and swung it horizontally and vertically to divide the wood into four. Then Chu Jungui picked up a wooden stick, the temperature in his hand rose rapidly, the wood softened under the high temperature of several hundred degrees, and was bent into a perfect semicircle by Chu Jungui. The rest of the wood is also made in the same way. Basically, Chu Jungui rolls his hands and bends it, which is a semicircle. The four semicircles are combined, the spokes are added, and a wooden shaft cut into a cylindrical shape is inserted in the middle, and a square plate is placed on it, and a cart is born.
Chu Jungui looked at the time, it only took 15 minutes in total. Facts have proved that if the manual speed is fast enough, it can also have a mass production effect.
Chu Jungui picked up the cart, and this time ran towards the big trees that were gathered together. These big trees are half a meter thick and more than ten meters high, very lush.
Chu Jungui put down the cart and picked up the hacksaw. In the blink of an eye, there was a harsh sound of sawing wood, and 30 seconds later, the first tree fell down. Then the next one is also 30 seconds, and the next one is still 30 seconds. When the 6 trees fell, the hacksaw was already dark red, and it was about to melt.
"Steel is not enough..." Chu Jungui shook his head, picked up a tree under his arm, picked up an axe, and slashed towards the crown of the tree.
Axe light flashed under the night sky, and a piece of the tree body flew out with the branches above it, leaving a section as smooth as a mirror.
After 4 axes, the front end of the log becomes a square, and another axe is used to pinch a point, and a piece of wood will be fine.
In this way, one, two, three, four, one piece of wood; two, two, three, four, and another piece of wood. It only took 4 minutes for all 6 logs to be processed. Chu Jungui threw all the six logs onto the trolley and pushed the cart back to the camp. These logs were said to be heavy or light or not, and they added up to 5 tons. Chu Jungui couldn't carry it back once and scored twice.
By the time he brought back the wood, Kaitian had already processed most of the tools, and only the two most complicated drill bits were still being manufactured.
Chu Jungui cut out more than a dozen wooden rods of different thicknesses, and installed handles on some of the tool bits. The thinnest one was only about the thickness of a hair.
Next was the highlight. Chu Jungui took out a dozen different crystals and hundreds of metal blanks of different sizes, put a metal plate on the wood as a workbench, and began to process the parts.
He twisted up a sesame-sized metal particle, heated it to 900 degrees with his bare hands, then hit it with a hammer, then took a drill bit as thin as a hair and drilled a hole in the middle, and then picked up the sharpening knife, just to see Chu Jungui's hand trembled slightly, and instantly cut a neat tooth pattern around the disc, then dripped a drop of water, smoked lightly, and a gear with a diameter of 1.5 mm was completed. Chu Jungui's visual inspection processing accuracy is roughly 0.002 mm, which is acceptable.
Chu Jungui put the gear aside and started machining the next part. When Kaitian finally finished processing the last tool, Chu Jungui also finished the last one, which was also the 179th part. These parts range from micromotors the size of a grain of rice to parts just 0.4 mm in diameter ~EbookFREE.me~ and two perfectly cut high-energy beam crystals.
Chu Jungui took a breath, held his breath, moved his hands at a high speed and stably, assembled the parts together, and then, under the watchful eye of Kaitian, a high-energy light-speed generator including three material nozzles and two different frequencies , the spray gun with the functions of feeding, shaping and curing appeared.
This is the core component of the basic manufacturing machine in the alien survival kit that is commonly equipped in interstellar travel.
With the spray gun, other parts are much easier to handle. Chu Jungui had already prepared the raw materials, and in just a few minutes, a standard manufacturing machine that was all handmade appeared on the workbench.
In this way, in the first hour after selecting the camp, Chu Jungui also built a cart, made several tons of wood, cooked a pot of dark dishes, and harvested a set of hand tools capable of processing complex parts. Made a manufacturing machine.
With the first manufacturing machine, it was like planting the first seed in the vast land, and everything has been possible since then. For example, now, the first thing Chu Jungui is going to do with it is to make another manufacturing machine.
(End of this chapter)