Vol 3 Chapter 954: Capacity wide open

The shaping spray gun is not the most important part of the manufacturing machine, but the intelligent control core. There will be a miniature master brain in the control core, which is responsible for decomposing the blueprint into tasks that the manufacturing machine can complete, and controlling each part to complete it one by one. Although the miniature mastermind of the manufacturing machine does not focus on performance, but on safety and reliability, it is often manufactured with technologies that are two or three generations behind, but it is also the mastermind, and its complexity far exceeds that of the most advanced chips in the mother star era. It belongs to the category of handmade.
It’s hard to say that Chu Jungui is an advanced mastermind. He still remembers dozens of sets of design drawings and manufacturing processes of a backward mastermind. If it must be done by hand, his hand-made accuracy is barely qualified. It's just that it's a huge project, and it can't be completed within a dozen days. The best way to manufacture a mastermind is to use a manufacturing machine with an advanced manufacturing process, but without a mastermind, it is impossible to have a manufacturing machine, thus falling into an infinite loop, which is also the reason why human beings have been exploring the real dream for decades and have never entered the mastermind era.
But now Chu Jungui has a means of breaking the game: Kaitian.
Chu Jungui pulled out all the various control circuits of the prototype manufacturing machine and turned it into a data interface consisting of hundreds of copper wires. Although it is a little rough and primitive, it can be used. It would take another day to create a modern standard biological data interface, and this copper wire took Chu Jungui 3 minutes.
After powering on and connecting to Kaitian, the manufacturing machine finally started to move. Chu Jungui inserted the prepared material rod into the feeding port, and after a few minutes, the manufacturing machine began to spit out the parts one by one.
Chu Jungui handed all the mechanical parts of the shaping spray gun to Kaitian, and went to grind a few crystal cores by himself. Fortunately, the test body was able to grind a surface with two strokes, and a core with hundreds of cut surfaces was formed in his hands at a speed visible to the naked eye, which was faster than machining.
20 minutes later, the second manufacturing machine was completed, and Kaitian had another copper wire in his hands. Then the two manufacturing machines started at the same time, and Kaitian automatically optimized the process and assigned different tasks to each. After 10 minutes, the third manufacturing machine was born. The next three will start working at the same time...
An hour later, the ten manufacturing machines in front of Chu Jungui lined up neatly. It's a bit difficult to open the sky, and the thin and small body has to be stretched to more than ten meters, so that all the manufacturing machines can be controlled at the same time. But that's its limit.
The reality made Chu Jungui slightly change the plan, first building a batch of data wires and interfaces, and then integrating all the interfaces into one platform, so that Kaitian could finally get together again.
Chu Jungui put a pot of dark dishes next to Kaitian, and then took out a cactus for him to take a photo. Kaitian suddenly had a great appetite and was in good spirits, working while eating. To be honest, controlling the making machine is still much easier than cutting wood, mainly because the taste of wood is too bad to gnaw on any heat.
With a manufacturing machine, anything is possible. Chu Jungui first built the thermal energy conversion network. In the real dream, the fuel is close to infinite. As long as the number of thermal power furnaces is large enough, the energy is infinite. Chu Jungui has become accustomed to the idea of ​​using energy to kill his opponents.
Chu Jungui built a three-meter-high and two-meter-diameter stationary power furnace with stones. The inner wall was coated with river mud that would solidify after being heated. The heat insulation efficiency was acceptable, and a heat energy conversion network was placed on the upper layer. This kind of stationary power furnace is only a transitional one. The power of a single unit is 200kw, although it is a bit small, but since it is going to be mass-produced, naturally there will not be only one. Chu Jungui plans to build the first batch of five.
With a power of 1000kw, it can barely drive a slightly larger electric furnace.
So in the third hour, Chu Jungui had 5 thermal furnaces, and after half an hour, a new electric furnace was in place and began to smelt molten steel. One furnace is made every half an hour, and a single furnace is 2 tons.
As soon as the production capacity is turned on, there is not enough fuel in the blink of an eye. Chu Jungui brought the trolley, and the trees in the open area had been cut down, so he went to the edge of the forest and started sawing and processing the wood. This time, he chose large trees with high density and hardness. Ten minutes later, Chu Jungui dragged the scooter back to the base. On the trolley are 4 logs weighing 15 tons. The reason why more is not installed is because the load of the trolley is so much, and the ground can not bear it.
After returning the wood to the camp, Chu Jungui returned immediately and started picking the next batch. This hour is for logging. It will be over in an hour soon, and the total production capacity of Chu Jungui is 60 tons of logs, including the round-trip time. The bottleneck of production capacity is mainly scooters. Chu Jungui began to consider whether to build an eight-wheel wide-tire scooter or something. It is really impossible to go on the crawler, so how can he collect 200 tons of logs in an hour.
However, 60 tons of logs are enough, 10 tons can be used for 5 thermal furnaces to burn for a whole day, and the rest are building materials.
In the fifth hour, Chu Jungui planned mining. With the 2-ton electric furnace in place, the ore was not enough. Although the iron ore content in the real dream is extremely high, even with this rough refining method, 4 tons of ore can produce 3 tons of iron, but the new electric furnace will eat up the ore reserves that can be picked up nearby. net.
The mine cliff was just one kilometer away. Chu Jungui added a circle of guards around the trolley, doubled the wheels, and went to the mine cliff.
Most of the ore in the mine cliff exists in the form of slate, no matter what type it is. Chu Jungui parked the scooter dozens of meters away, picked up the special mining pick, took big strides to start running, then jumped up, and his body rose slowly until it was flush with a dark red mineral belt ten meters high. , the mining pick brought an arc of light and slashed into the mining belt, almost the entire front edge did not enter the rock!
Chu Jungui kicked the cliff, and with a prying force, a large piece of ore rock fell off the mountain wall, and then fell into a dozen pieces on the ground.
The large piece of ore that was pryed down was seven or eight meters square and half a meter thick. Chu Jungui landed lightly, and then picked up a one-meter-square piece of ore and weighed it. This ore is about half a cubic meter, but it weighs 4 tons and has a density that exceeds that of iron in reality. However, in the real dream, a cubic meter of iron weighs 9 tons.
Chu Jungui only put three pieces of ore on the trolley, and the weight has exceeded 20 tons. The ore he pryed down was more than 200 tons, and it seemed that he had to move it at least 10 times.
It is much faster to carry it back and forth. In one hour, Chu Jungui has mined the mine twice and moved it back and forth nearly 20 times, with a cumulative production capacity of 400 tons. These mines were enough for the time being, and Chu Jungui finally got a little tired, so he hugged the 180,000-calorie bucket pot and collected statistics while eating.
Now the construction of the camp has just completed 6 hours, and it has begun to take shape. This production capacity should have been much higher than that of a primitive village with a population of more than 100. Especially for metals, Chu Jun's return to one furnace is their 3-year output.
Looking at these data, Chu Jungui suddenly had a strange feeling, it seemed... he called mass production?
Although there is a small achievement, it is still far from the real mass production in Chu Jungui's mind, and this material is far from enough to fight the monster and the alienated warriors under its command at least a few hundred.
Chu Jungui swallowed most of the pot of dark dishes in two mouthfuls, then rubbed a bunch of grass roots, leaves and berries into it, made up a pot, and started the next project.
In the seventh hour, Chu Jungui built a smelting furnace. This is not the original electric furnace, but the smelting furnace of the interstellar age, the same as the one he built on Planet 4. The smelting furnace is much more productive and efficient than the electric furnace, and the key to building it is actually also the micro-master. However, where a miniature mastermind is needed, Kaitian can solve it. It struggled to eat for hours and was able to control a few more devices.
This smelting furnace smelts limestone, river mud, river sand and other materials, and what comes out is non-metallic building materials, similar to the concrete of the parent star era. The production capacity is very fast, one furnace in 10 minutes, 2 cubic meters per furnace, and 12 cubic meters of concrete in one hour.
In the eighth hour, the second smelting furnace was in place, the manufacturing machine began to produce steel plates and fasteners, and Chu Jungui began to lay the foundation for the camp.
On the 9th hour, the construction of the defense officially began.
Chu Jungui first built a wall with a baseline of 10 meters on the side facing the forest, erected ten thin steel plates of 1 square meter and a thickness of 1 centimeter, and then erected a hard board of 30 centimeters thick outside, leaving 40 meters between the two plates. Centimeters of space, pour concrete in the middle, and finally fix it with solid pieces.
The performance of non-metallic building materials is much better than that of old-fashioned concrete. It only takes 10 minutes to harden, and if Chu Jungui bakes it with heat, it can be shortened by half.
After 15 minutes, Chu Jungui built another layer up, and finally turned into an outer wall with a length of 10 meters and a height of 2 meters. Chu Jungui estimated that even a 12.7mm caliber armor-piercing bullet could not penetrate this wall, but from the outside, it was just an ordinary wooden wall.
At the end of the tenth hour, Chu Jungui built three outer walls for defense, and built a low platform less than one meter inside, so that when people stood on it, most of their upper body was just exposed outside the wall, which is convenient for shooting.
When building defense facilities, Kaitian controls the manufacturing machine non-stop, half of which makes alloy arrows, and the other half makes steel plates and other components.
The quality of the alloy arrows exported by the manufacturing machine is uniform and the center of gravity is all the same~EbookFREE.me~ Heavy arrows 500g, light arrows 150g, a single batch of 5, 10 batches can be produced per hour, so at the end of the 10th hour, Chu Jungui has already returned There are 250 alloy arrows.
When he was busy, Kaitian suddenly warned: "Master, switch the shortwave vision!"
"Ok?"
Chu Jungui's pupils changed, he looked towards the forest, and then he saw vague figures moving quickly, rushing towards him. From the outline, it is the ape monster that Chu Jungui once encountered, but there are three clearly tall figures, which cannot be seen by normal human vision, but in the far end of the ultraviolet region, which is close to the X-band , they are very striking.
There were more than 200 ordinary ape monsters attacking. If it had been a few hours ago, it might have caused some trouble for Chu Jungui, but now, two and a half boxes of alloy arrows were placed at Chu Jungui's feet.
Although the power of the alloy arrow is enough to instantly kill ape monsters, and the situation of piercing through two and three cannot be ruled out, the always cautious test subject still feels a little lack of confidence. There are times when indefinite arrows are not enough.
(End of this chapter)