Chapter 523: Time cost is the biggest cost

The transaction area of ​​one thousand and fifty acres is actually about one thousand two hundred acres. The surrounding greenery, roads, and bridges are not counted in it, and the mountain area is calculated according to the plane.
Buy it here, and start construction there immediately.
Kleist’s 800-acre project has basically been capped, and construction companies are not needed for the rest of the design and decoration, so the construction companies are almost seamlessly engaged in the construction of the fab.
Of course, fabs are special, and there are many places that general construction companies cannot do.
Fortunately, Pei Qianlong recruited many big players in the industry. Soon someone introduced suitable construction companies to join in, and several construction companies quickly reached engineering agreements.
Lin Dong’s Science and Technology Gift Pack version 1.0 contains relatively high-end fab building drawings and various parameters.
Just follow it.
According to the project plan, the project will take at least seven months from start to completion, and it will take until the end of the year.
During this period, it is naturally impossible for everyone to sit there and wait.
The data in the U disk can be analyzed and put into practice at the same time.
"That's not good, this is our killer." A technical executive couldn't help raising his voice, and he wondered if there was a problem with the general manager's mind.
When everyone was discussing how to build the lithography machine, the general manager who was half asleep and awake suddenly came up and everyone did it together.
Do it together?
This person probably does not know what kind of lithography machine exists in the chip field.
For chip manufacturers to successfully manufacture chips, they must use lithography machines. Lithography machine is the core equipment technology for producing chips, and it is very difficult. Neon Holland occupies more than 90% of the global market share.
The most advanced technology can only be done by the Dutch company ASML.
ASML of the Netherlands has a market share of up to 80% of the global fab lithography equipment, and it is almost in a dominant position in the dry exposure machine, immersion lithography machine, and EUV (extreme ultraviolet lithography machine) market.
The chip manufacturers, TSMC, Samsung, Intel and other international semiconductor giants are their customers.
In the U disk given by Pei Qianlong, the most valuable is the 28nm extreme ultraviolet lithography machine technology.
ASML claims that even if you give you drawings, you can't make lithography machines.
In fact, they are just talking.
They are stupid to take out the drawings of the lithography machine.
Now, Kleist has mastered the core technology of lithography machines, not only the drawings, but also the principles and algorithms involved in all aspects.
This item alone can suddenly distance itself from other domestic competitors for ten years. After all, the lithography machine independently developed by domestic chip giants is still at the 90nm level.
"I just heard from you that the lithography machine is a super-complex thinking system composed of tens of thousands of precision parts, hundreds of actuator sensors, and tens of millions of lines of code. Even ASML does not rely on its own power to make the lithography machine. It was made, since it is like this..." Pei Qianlong paused and asked, "Why do you still want to toss out our lithography machine independently?"
Or, this is what the authorities, fans, bystanders, clear it.
Because Pei Qianlong didn't understand, he couldn't understand how valuable a lithography machine could etch 28nm process chips.
He only knows that what can't be done has no value.
The development of the chip field is changing with each passing day. When they have the ability to independently manufacture 28nm lithography machines-assuming this is really possible, maybe 28nm at that time is as low-end as the current 90nm.
At that time, it is not the same as worthless.
The senior executives of several chip divisions were somewhat silent.
They had not been in Kleist for a long time, but they were all attracted by the vision that they described in their hearts-Pei Qianlong didn't paint them, nor could he.
Dominate the domestic chip field and then go abroad.
The first step is to make the lithography machine.
This kind of thing that seems to be almost impossible, everyone discusses it in a different way.
All froze.
Now Pei Qianlong awakened them with a single word, allowing them to recognize reality.
They can't do it.
Since it can't be done, what's the point of the fab?
It is true that the etching technology is not only photolithography, but also metal etching machines, silicon etching machines, and dielectric etching machines.
With the support of the Guo Jia 02 special project, North China Huachuang has continuously achieved breakthroughs in the field of silicon etching machines. The advanced process technology has been rising all the way. Breakthroughs have been achieved at 28nm and 22nm. At the beginning of this year, it has announced the development of 14nm process silicon etching. machine.
But in the final analysis, lithography represents advanced technology.
SMIC bit the bullet and ordered a lithography machine from ASML, which cost 160 million US dollars. The delay in delivering it is just dragging you.
In a pure seller market environment ~EbookFREE.me~ you can't find a place to complain.
"You can talk about other things only when you make it. You can screen and find a few capable partners in this area. Let's make the lithography machine together. Remember, time cost is the biggest cost. Of course, we You must make a fortune here." Pei Qianlong made a final decision.
Although the others were unwilling, they could not find a reason to object.
What's more, making a fortune is not bad.
"It's always our Huaxia company. The development of our family is not enough to drive the progress of the entire industry." Said one of the great techies.
"Yes, that's it. If other companies don't develop, we will make more high-end equipment someday in the future, and who will we sell to." Pei Qianlong praised this.
"I understand, we will do this as soon as possible, and strive to make the 28nm process lithography machine in the shortest time." Sun Moyu also expressed support for this, but he immediately added: "Everyone is in this industry. We all understand the backwardness and difficulty in this aspect of our mainland, and we are determined to change this situation. However, since we are a member of the Crest Chip Division, everything must be based on the interests of the company. What silly thing is Yi Hot."
Everyone listened solemnly and felt that what Lao Sun said was also very important.
"The development of the chip field in the past few years has proved that other companies can't do it. How much money or talent they have given, they have not completely changed the current industry dilemma," Chief Technology Officer Liang Renzhong also agreed: "In this case , Then it’s up to us to change everything, and the premise of everything must be that our company develops. Only when it develops can we be able to do more things."
People who engage in technology may not necessarily be stiff if they have broad brains.
The point of view of the problem is also very scientific and reasonable.