Vol 2 Chapter 1556: A frustrated choice

Obviously, Lao Ma is also unwilling to fill in nearly funds. There are many reasons, mainly two reasons. On the one hand, there must be no money, or there is no extra money to invest in such a risky project. He is a businessman, and the businessman cannot put all his chips into one project. And for another reason, he was more or less affected by this incident and overseas voices.
Of course, compared with Xuebing and Liu Qixiang, the good thing about Lao Ma is that he did not choose to withdraw from the stock, but expressed his support to the end. For Wu Hao and others, this is definitely good news.
The reason for these people to withdraw or terminate their continued investment is nothing more than their close business ties with overseas, so under the current circumstances, they have to make a choice.
As far as Wu Hao and others are concerned, it is not him, Xiao Ma, Tao Zhengyang, or Li Feihong, Sun Shu and the others, their overseas market is limited.
Although Penguin has been working hard to go outside these years, but Naihe has not achieved much, and its main market is still in the country. So in the face of threats from overseas, they naturally won't worry too much.
The same is true of Li Feihong and Sun Shu. They are even more dependent on the domestic market and do not have much business in overseas markets, so they are naturally not afraid.
As for Tao Zhengyang and the others, after being hit successively, although they have other interests in overseas markets, the current situation is not whether they should choose or not, but the only way to make independent innovation.
As for Wu Hao and Tao Zhengyang, they are actually the same, and so is it. Their interests in overseas markets are no worse than corn or even some people want. But they have their advantages, relying on advanced technology and excellent products, even in overseas markets are still strong. In addition, compared with several other companies, they are not listed companies, and the company's share structure is relatively simple, so there is no need to face the problems faced by Xuebing.
Of course, for Xue Bing and the others, they would definitely not give up when they were not a last resort. Now that the lithography machine has been developed, we will wait for the money to be collected later. Giving up at this stage is tantamount to throwing away the money in vain.
Therefore, as long as there is a little hope, they will stick to it, after all, no one will have trouble with the interests. But if the situation is critical, they will give up very decisively to ensure that their main business is not affected.
In business, there is nothing to criticize. Moreover, the shares controlled by these companies are limited and have little impact.
As the case was solved, the impact of this incident gradually calmed down. Shanghaixin Technology Co., Ltd. has resumed normal operation after improving relevant security facilities. For them, time is money. If you build a lithography machine early, you will get an extra profit. Now for the 5nm euv lithography machine they have developed, many companies have shown strong interest and have even sent representatives to seek cooperation. Especially for several major domestic fabs and chip foundries, the high-process lithography machine in this area in the past mainly relied on overseas, even if they spent a lot of money, they might not necessarily buy them.
And now the domestically produced new high-process 5-nanometer euv lithography machine turned out, they were naturally excited. On the one hand, they are happy that in the field of high-process lithography machines, they no longer have to be stuck. On the other hand, in their opinion, the price of domestically produced 5-nanometer euv lithography machines will definitely be much cheaper compared to overseas prices.
Faced with the strong purchase intentions of these manufacturers, Wu Hao and others did not refuse, but they also bluntly said that the current core technology lithography machine will give priority to satisfying its own needs, and then consider selling externally.
This made these manufacturers a little frustrated, but they did not give up. Some manufacturers have already started pricing.
Wu Hao and the others were not in a hurry to agree, but first to whet their appetite to see how sincere they could show. If the sincerity is enough, they don't mind cooperating with each other.
Compared with the prosperous scene of Shanghaixin Technology, the Shudu factory seems a little low-key here. Many reporters hoped to be able to enter the factory or even the production workshop for interviews, but they were rejected. On the one hand, because there is really nothing to advertise in the Shudu factory, there is no need for advertising in this regard, because it will not connect with ordinary consumers, so there is no need for traffic to catch up, and naturally there is no need for interviews.
On the other hand, it is also for safety. On the one hand, it is for security. After all, they don't want to be touched by the things that just happened the other day. Let these reporters come in and take a random shot, wouldn't it be tantamount to showing the other side the way.
There is also the dust-free requirement in the production workshop. Outsiders are definitely not allowed to enter, let alone interviews on the spot.
After the first 5nm euv lithography machine arrived at the Shudu factory, the installation and commissioning work began immediately. This process is more time-consuming, because this is not a matter of tightening a few screws and installing it, but it needs to be installed. The equipment can be organically combined with other equipment in the frame to form a complete assembly line.
And this time they are also using Wu Hao's intelligent unmanned chemical factory technology. The normal production and manufacturing process is completely automated, intelligent and unmanned, so the various standards and requirements are higher. Therefore, this early debugging work is naturally very important.
Even if it is completed in accordance with the debugging, it is impossible to immediately put into production. Fortunately, several rounds of trial production should be carried out, and improvements should be made according to the products produced ~ EbookFREE.me~ especially the yield rate of the products, which is the largest chip production problem. Therefore, if you want to improve the yield rate, this requires a very long and continuous debugging, and finally it can reach an ideal level.
In addition, a series of supporting industries with fabs and chip manufacturing should also be developed in coordination, and should be able to keep up with the development of lithography machines.
Because chip production is not just a problem of a lithography machine, it also involves many processes and processes, and in this respect, our country is also lacking.
After Wu Hao started this lithography machine development project, they began to support other supporting industry technologies, and successively injected capital into several key supporting equipment companies.
With Wu Hao's support, these companies have also achieved results. It's just that compared to the huge success of the lithography machine, their progress is still somewhat insufficient. However, in terms of its own and domestic related industries, this kind of progress is certainly huge.
At present, these companies, including companies in some other industries, are stepping up their efforts, driven by the successful development of domestic lithography machines, to strive to achieve good results as soon as possible.