Chapter 409: Magical Refiner (2)

Alchemy is also good, refining equipment is also good, often have a first-class one-day saying. , wrought iron, is the pre-fabrication method of the refiner, the black iron used for the monk modulation, and the bronze. Most are forged in advance.
Under normal circumstances, the refiner does not need his own wrought iron.
This is a physical activity, the time of the refiner is expensive, and it is directly used by others forged iron.
Wang Hui came in this meeting, Sun Hao wrought iron is happy.
The brow was slightly wrinkled, and Wang Hui looked at Sun Hao forging for a while and was completely disappointed with Sun Hao.
This kid, a few days ago, also took an iron ingot and tried to adjust it. It is now good, it is estimated that the adjustment is not successful. Disappointed, I went to practice wrought iron myself.
Although wrought iron is also a craft, but to be honest, it is not a high-end craftsmanship. In the monk world, it is also possible to mix and eat. It is estimated that this kid will be the material for the meal in the future.
Shaking his head, Wang Hui carried his hands and stepped out of the sword room, no longer paying attention to Sun Hao.
Sun Hao had to wrought iron himself.
The refiner level is a heavy day.
Second-level refiner, refining the spirit.
Compared with the refining of the flying sword, the spirit flying sword is undoubtedly much more difficult.
In the first step, the requirements for mud embryos are much higher, but the higher requirements are the rune lines. Fortunately, the second runes are precisely the parts that Sun Hao has learned and can master. This step is It didn't take much effort to complete.
At the time of the second adjustment, Sun Hao found that the black iron ingots on hand, bronze or not, did not meet the requirements.
The refining materials of the spirits are more detailed than the implements, and the ratio is more detailed.
The requirements for dispensing are more elaborate.
In order to adjust better, Sun Hao took up the hammer and began to wrought iron by himself.
At this time, Sun Hao discovered that within the sword room, the equipment of wrought iron is readily available, but in the past, few disciples used it.
Others may think that wrought iron can be practiced or not, but Sun Hao thinks that wrought iron is the basic skill of the refiner, but it can't be done. Besides, when Sun Hao was a child, he began to wrought iron. In Wangcun, he wrought iron for many years, but also Said, I have already practiced a good craft of wrought iron.
Exercise techniques are already relatively mature, which is the basis of the foundation of refining Feijian.
There are three ways to exercise refining materials: one hot forging; two for warm forging; three for cold forging.
Hot forging is a common method used by higher monks. It is necessary to turn all the materials into liquid, liquid to remove impurities, and to obtain high-density and high-precision forging.
The difficulty of hot forging is high temperature, and the melting point of many refining materials is extremely high, and non-powerful monks cannot make real fire.
Warm forging, Sun Hao's current forging, accurately speaking, is warm forging. Use a certain temperature to soften the refining material, and then supplement it with repeated forging to improve the quality of the refining material.
Cold forging is an exercise technique that uses special means, special real elements, and direct forging materials in an ordinary environment.
In contrast, the method of cold forging is more rare, rarely handed down, not handed down, and has many unexpected uses.
At present, Sun Hao does not master the method of cold forging, and hot forging is also unsuccessful.
Can be used, trained, is precisely warm forging.
The method of warm forging is also a more common exercise method for lower-ranking monks.
Warm forging has the law.
The smelting of steel into steel is a common method used by monks to refine the flying swords and improve the quality of refining materials.
If Wang Hui is present, if Wang Hui can be patient, and carefully observe Sun Hao's wrought iron, in fact, it will be found that Sun Hao wrought iron has surpassed the ordinary forging, and Sun Hao is now the wrought iron method.
Xuan iron started, heated forging.
Heat forging more than one hundred times, one forging and one for a light, until the two are not reduced, that is, hundreds of steel.
Such repeated forging can eliminate inclusions in the steel, reduce the size of residual inclusions, and make the components in the black iron tend to be uniform, and the structure tends to be dense, making it a better upper material than the ordinary black iron.
The ancient sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred sacred See, steelmaking is also true. But take more than a hundred fires of the black iron forging, each forging, one forging and one light, to the forging and the pounds are not reduced, then the pure steel is also, although the hundred refining, not consuming. The pure iron, the color is clear, the grinding is bright, black and black, and the iron is different. There are also those who have no refining and no steel, all of which are produced by the land."
The law of smelting has been around for a long time.
It seems that the method of smelting is well understood and well implemented.
However, it is heated for hundreds of times and forged.
But in fact, the technique of smelting is also a kind of high-end exercise technique that is difficult for ordinary monks to master.
Ordinary wrought iron is easy to learn, but it is difficult to master its essence without tempering and refining without tempering.
There are many ways to practice.
At present, Sun Hao has studied and practiced for many years and mastered three kinds of exercise techniques, namely,
multiple stacking
,
single material folding
and
winding forging
.
The refining of the Flying Sword is quite demanding on materials. All three kinds of forging methods are needed.
First use the "single material folding" method to exercise the black iron, and then use the "winding and forging" method to rotate the other refining materials into a group, a hundred forging, forging into the black iron, and finally, using "multiple materials" The method of stacking, stacking forging.
Sun Hao sank into the law of the hundred-forging with a rhythmic rhythm.
This forging is more than a month.
This month, Wang Hui also passed Sun Hao’s sword room several times. However, he heard the sound of forging in the sword room, and he also turned his back and shook his head.
However, Master Luo, one day, stood outside the Sun Hao sword room, listening to the ears for a long time, his face showing an unpredictable smile, then shaking his head and shaking his head, carrying his hands, Shi Shiran away.
He also did not enter the sword room.
After January, Sun Hao slowly recovered his hammer and had a satisfied smile on his face.
It is not easy. After a month, it is finally forged together, and the proportion of various metals has reached the required adjustment materials.
Cooked the door, smelt, and inject Jianfan.
Sun Hao has a in his body, and the fire is mastered in place. These two steps are a matter of course.
Then there is scraping and smelting.
Scraping is similar to the requirements of the flying sword. There is not much innovation. Of course, the higher the level of the symbol, the lower the fault tolerance. The accuracy of the sword flying rune is higher, which is not a problem for Sun Hao. .
Sun Hao completed the scraping in one go.
Into the cultivation, this step, the spirit of the flying sword has more additional requirements than the French flying sword.
Compared with the implement, the sword is more tough and sharper than the Feijian sword. The biggest difference is spirituality.
The instrument is a dead object, the spirituality is not obvious, and the spirit is often spiritual.
How spirituality comes to repair is the key.
Different spirits have different ways of spirituality.
Some spirits and even the refining materials themselves have their own spirituality.
The spirituality of most of the spirits is given by the refiner's special means.
The means of birthing spirituality are also varied. The most common method is the so-called "people's refining method."
When the monk refines the sword, he is portrayed in the sword.
Sword body smelting casting, quenching and cooling, at this time, without water, directly use the blood of the monk to wash the sword body, and then, when the smelting, spur "spiritual array", you can let the spirit sword gain spirituality.
The magician monk refining the sword, in order to make the sword more spiritual, often directly take the life of the person to fill, so the flying sword is often fierce.
Sun Hao's flying sword above ~EbookFREE.me~ engraved with the spirit of the array, but, Sun Hao quenching used, is the blood of the beast.
Not in a hurry, Sun Hao grinds the lines of the sword body, and after the glory flow, he squeezes a few shackles in his hands and hits the flying sword.
The Feijian sword body slightly vibrated, and immediately, above the sword body, Guanghua masterpiece, as if to live.
Not in a hurry, and on the third day, Sun Hao carefully "splashed" the sword and opened the blade.
A sword is completed.
If not unexpected, this flying sword absolutely reached the level of the sword, that is, did not know what level was reached.
Sun Hao can't wait to start testing.
In the eighth month of Wanshou Mountain, Sun Hao refines his first Aura flying sword.
After a test, Sun Hao was overjoyed. To be continued. .
...()