Chapter 1178: Disappointed

This meeting held at the Ministry of Weapons Industry lasted until the evening. After the meeting was over, everyone walked out of the meeting room to realize that at this moment, there were already thousands of lights.
The meeting for more than ten hours has consumed almost everyone's energy, especially the main participants are not young anymore, but their faces are full of smiles. The previous ones were suspended because of the temporary frustration of the project. A little bit of frustration and loss on his face was swept away.
Because the harvest of this meeting is really great.
Tan Zhenhua is the kind of person who will do what he says and will never delay for a minute. He directly phoned a number of old friends and collaborating units at the meeting, and got rich results.
For example, when the call was made to the Iron and Steel Research Institute, Dean Cai Qigong said on the spot that as long as the money is in place, the development of the new artillery steel project at the Iron and Steel Research Institute can be speeded up immediately. "996" is weak, they can. This VIP customer, Tan Zhenhua, was specially upgraded to the "724" model, and then the forces of various universities and related units across the country were mobilized. Anyway, the material formula was originally used to use the "exhaustive method" to engage in crowd tactics. The most suitable. Tan Er thinks very much about this. He did it when he sponsored Guo Yicheng to develop ferrite permanent magnet materials...
As for the Ningdu Special Steel Plant and Ningdu Precision Machine Tool Co., Ltd., which originally belonged to Tan Zhenhua, when they heard that it was possible to get orders from the military industry for this project, they immediately came to the spirit, saying that as long as they can receive the order, what should they do? You can do it!
Fang Hongbo, the general manager of Ningdu Precision Machine Tool Co., Ltd., stated on the spot: the more advanced ones dare not say that, with the existing technology reserve, the "three-axis CNC precision deep hole drilling and milling composite machine tool" should be taken out at least within one year. A certain degree of certainty, and a military order has been established-this is not their bragging, but that this kind of special machine tool is actually a combination of various machine tool basic technologies. Under the premise of introducing, digesting and absorbing a large amount of Toshiba advanced technology , They have mastered the design essentials of each sub-system of a three-axis CNC machine tool. The development of this special machine tool is just a matter of taking time to solve the parameter coordination of each sub-system and the adjustment of the whole machine. They have not done it before, and it is completely a market. Problem—The Ordnance Industry System is also a relatively closed system. The suppliers of its machine tools are basically the original state-owned machine tool factories or several western advanced machine tool manufacturers that can be purchased, such as Ningdu Machine Tool Factory, which was originally in China. They can only be ranked in the second-tier small factories, and have never been in the eyes of the Ministry of Weaponry Industry.
The situation in the Ningdu Special Steel Plant is more complicated. There was originally a 10-ton electroslag furnace in the factory, but it was built in the early 1970s. Due to the times, this furnace has poor melting purity and control. The factory has always wanted to upgrade due to problems such as large system errors, high energy consumption, and serious pollution, but the recent orders are too full...
What can be solved with money is not a problem in Tan Zhenhua’s view. He decided on the spot to build a 100-ton electroslag furnace and immediately called Cai Qigong again to request technical support. Order Dean Cai was so happy that he could not wait to immediately crawl over the phone line and hug Tan Zhenhua and kiss him, but Tan Zhenhua kindly reminded him that his phone is wireless, and he might find a place where he hasn’t settled when he climbs halfway...
The automatic control system of this furnace is a bit troublesome. This system is not within the scope of the agreement between Tan Zhenhua and Mellon. Therefore, Rockwell could not give an affirmative answer immediately. Considering the urgency of the matter, Tan Zhenhua decided to fly back to the United States as soon as possible to meet Skeff. Mei Long negotiated in person, and this is probably the most uncertain part of the entire project.
As for making a phone call to help Zhu Yusen’s new test gun in the Southwest Aluminum Plant, it’s a trivial matter.
There is also the new set of "down-and-transition image stabilization fire control system". After detailed exchanges with Chief Engineer Wang Xinqiao, Tan Zhenhua learned that this is a complex optical, electrical, and mechanical composite system. It consists of a turret angular velocity sensor, a gunner’s independent image stabilization and rangefinder night vision sight, a car commander’s day and night observation cable reel, anemometer, driver’s low-light night vision, gyroscope, barrel hydraulic two-way stabilization system, fire The control computer, motion control system, turret steering gear and other equipment are composed of a series of equipment, spanning multiple disciplines, with extremely high technical content. A small defect in any subsystem will affect the reliability of the entire system. Although the capabilities can be developed, there are indeed many minor problems. Many problems were exposed during the actual test drive. This is also inferior to the domestic products of the United States, and it is also a criticism of the Pakistani people.
In this regard, Tan Zhenhua said that although he can't help much, he also has a Mordu Optoelectronic Equipment Co., Ltd., which has a good long-term cooperative relationship with Changchun Institute of Optics and Mechanics, Huaxia Academy of Sciences, and currently has joint research and development products. For the project, if possible, the tripartite cooperation to improve this system, focusing on the deficiencies summarized by Chief Zhu, especially the ease of production and reliability of engineering mass production products, which should be visible in the short term As for the results, as for the fire control computer, it is even simpler. Master Wang, what do you want...
Of course, the most troublesome thing is the old problem faced by almost all of China's power products-the engine.
At this point, the engine chief Wang Baozhong and the tank chief Fang Weixian had another dispute. Wang Baozhong insisted that if the "Storm 2" is mass-produced, it is better to use the ready-made, already relatively mature 12150ZL engine with 730 horsepower, while Fang Weixian has It is believed that the combat weight of the "Storm 2" prototype has reached 39.6 tons. According to the requirements of the Pakistan Railways, the weight is bound to increase further when external composite armor is added to the key parts, and this engine will exist. Obviously the problem of insufficient power, considering that the new domestic high-power engine is still in the development process, and the mass production is unknown, so it is a feasible choice to use the existing 8V165 engine tuned to 800 horsepower. As for now The problem can be solved by continuing to invest in R&D and improvement.
When Fang Weixian said these words, his eyes kept gazing at Tan Zhenhua. Obviously, he hoped that Tan Zhenhua would unburden again and sponsor the follow-up research and development of this engine. After all, this small rich man always paid a lot of attention and speed in this meeting. The impression left is too deep.
But this time, he was a little disappointed.