Chapter 483: Pick block

Fujio Masuoka asked strangely: "What's wrong? Is there any problem with Kumagai-kun? Speaking of which, he is not actually responsible for the business of China, but the country further north. However, I heard that because of his recent The performance is very good, so it may be promoted."
Tan Zhenhua listened to Fujio Masuoka's unintentional remarks, and affirmed the guess in his heart. The famous Kumagaikawa also showed up. It seems that his life is really rich and colorful!
Throughout the 1980s, at the end of the "Cold War" pattern that was triggered by the sharp confrontation between the United States and the Soviet Union, which had a profound impact on the world structure, there were many shocking cases. If these cases are ranked according to their impact If this is the case, the "Toshiba Incident" triggered by the Kumagaigawa-kun who has not yet met can definitely be ranked in the top ten.
As we all know, Soviet Russia’s current planned economic system is facing a complete collapse, and its internal reforms are obviously not successful. This has caused a large amount of basic production and living materials to be imported. Among them, the mechanical and electronic processing from the Japanese Equipment has always occupied the bulk of imported goods.
Why does Soviet Russia need to import Japanese machinery and electronic processing equipment?
It was just the tears of this lame bear.
Soviet Russia’s heavy industry, especially military-related heavy industry is quite developed. Unfortunately, its precision processing industry is very weak, and the electronics industry has taken a divergence. For example, it is a large country in the production of machine tools, high-precision machine tools. But it must be imported; for example, when electronic components in the West have begun to popularize integrated circuits on a large scale, they are still playing with silly and thick electron tubes, and they can cook rabbits within 30 meters with the power of aircraft airborne radars. Proud.
With the further development of science and technology, the level of electronics and precision processing has more and more directly affected the level of development of military equipment. Obviously, Soviet Russia gradually realized this in the process of catching up with the United States. Unfortunately, one step was a step difference, and in desperation, they had to turn to foreign aid.
In 1980, Osipov, the vice president of the Russian Technical Machinery Import Company with a KGB background, asked Toshiba about the intent to import 4 high-precision five-axis CNC milling machines, and immediately received a warm response from Toshiba. The total contract price for the four milling machines is as high as 3.5 billion yen. At the exchange rate of 1:200 at that time, the order value is as high as 17 million US dollars!
This is a huge order, and according to calculations, Toshiba can obtain more than 50% of the profit with this order!
Buyers and sellers are very satisfied, but there is only one problem. This high-precision five-axis CNC milling machine is a sensitive material that "Batumi" banned from exporting to Soviet Russia!
Because the use of these machine tools in Soviet Russia is very obvious, just to process the "seven-blade large skew propeller" on the submarine!
Once the "high-precision five-axis CNC milling machine" is used for processing, it saves time and effort, and can obtain very good surface performance, thereby reducing the submarine noise caused by the propeller by an order of magnitude!
So, a good show was staged. On May 27, 1983, the four machine tools that had been produced left the port at Shibaura Wharf in Wakuni and were loaded with cargo ships from Soviet Russia. They had already exchanged money with Soviet Russia. The Norwegian Kongshiborg company finally arrived at its destination-Soviet Russia.
Toshiba even abides by business ethics and provides a series of services including on-site assembly, commissioning, operation training, maintenance and other services to the Soviet Union, including teaching and meeting...
This was a business that everyone liked, and it was done quite secretly. At the time, it was hidden from almost everyone. Unfortunately, the problem was with one person.
Kumagaigawa.
As the main negotiator and executor of this business, Kumagaigawa knew everything about everything. However, such a key figure was subconsciously forgotten by Toshiba. In December 1985, he worked for Toshiba and has been promoted. The salary increase is doing to marry Bai Fumi, who has since embarked on the pinnacle of life, Kumagaigawa-kun, because of a little conflict with his direct boss, he actually received a layoff notice from the company...
How can this be tolerated!
Kumagaigawa lifted the table on the spot, and then ran to the chairman of "Batumi", Ganier Taurig, to be a "stained witness" and exposed the Toshiba incident.
This immediately stabbed the hornet's nest. Ganier immediately instructed the Ministry of International Trade and Industry of the Republic of Korea to conduct a comprehensive investigation. With the "assistance" of the CIA, the National Police Department of the Republic of Korea obtained sufficient evidence in the investigation, and then on May 27, 1987 On the same day, Ryuji Lin, director of the casting department of Toshiba Machinery, and Hiraki Tanimura, director of the machine tool business department were arrested.
However, this matter is not over yet. At this moment, the country of Japan is using the power of the whole country to engage in the so-called "second DRAM war" with the United States, and the Americans who were beaten by the country to lose their armor and armor in the so-called "first DRAM war" are just right. Taking this opportunity to suppress the Japanese nation in an all-round way, the Japanese prime minister Yasuhiro Nakasone had to apologize repeatedly to the United States and spent 100 million yen to publish a full-page "repentance ad" in more than 50 newspapers in the United States. "And after signing a series of unequal treaties in private, the matter was finally settled.
Of course, what is the outcome of the so-called "Second DRAM War"?
It is precisely by virtue of the victory of this "war" that the U.S. has achieved a series of hegemonic enterprises in the semiconductor industry such as "Micron", "Intel" and "Texas Instruments", thus firmly occupying the position of the bridgehead for the development of Bluestar technology.
And now, the opposite Fujio Masuoka mentioned this person, and this person actually appeared at the Canton Fair new product launch in April this year!
Tan Zhenhua felt that, in the dark, a hand gently moved the gear of fate, connecting him to this Kumagaichuan's line of fate.
What kind of connection would it be? Presumably, it will be very exciting, right?
Tan Zhenhua thought, unexpectedly looking forward to it in her heart.
High-precision five-axis linkage milling machine, well, there are other high-precision CNC machining centers, these are good things that make people drool!
These things also have a name, which is the so-called "industrial master machine". With them, other automated processing equipment can be produced. Compared with traditional manual processing, they are polished by a senior technician like Pan Shuisheng. For products, it has a series of advantages such as high precision, good consistency, high efficiency, and excellent interchangeability.
Moreover, from the reality, if you want to become a big industrial country, you must first become a big equipment country, unable to independently produce advanced equipment, then all the productive forces you have now will be scrap iron when encountering unpredictable blockades. For a bunch of specific examples, please refer to Pakistani in the Second India-Pakistan War and Argentina, who was just beaten up.
Okay, let’s talk about this Kumagaigawa-kun. After all, it’s only 1982. Toshiba hasn’t delivered the goods yet. Don’t worry at this time. The most important thing is to take down the Fujio Masuoka in front of you. , So that you can get a foot in the semiconductor industry.
The "DRAM war" or something, without our second master Tan, do you mean to call it a "war"?
"Look at the black hole over there, it must be the thief's lair, wait for me to catch up and kill him cleanly."
Tan Zhenhua hummed a wonderful clip of the quintessence of Peking opera "Pick a Pulley" in his heart, but there was a bright smile on his face: "It seems that this Kumagaigawa-kun has not met with me, but he has a deep understanding of my business. I really want to get to know him if I have a chance. But let’s talk about this "Flash" first, Fujio-kun, do you still think my proposal is casual?"