Chapter 22: Sculpture

"After the system scan, the target ebony perfectly fits the entrusted order. The target figure Song Hai, the shipwrecked ship who returned in 1972, and the character's photo. The host can use a carpenter-type terminator to shape this sculpture.
多么 How exciting a short sentence is.
"Unloading!" At the order, all the wood was piled up at the door of Sifan's workshop, and the inside of the workshop was definitely not allowed to visit. The large and small-looking pieces of wood on the ground were all in their original state, even covered with dust, but Si Fan didn't care, and he moved all the small pieces into the factory. As for the largest pieces of boxwood, they are left there. Wait for the Terminator to carry them. As for the huge ebony, more than a dozen guys pushed it down on the car with a steel frame. , The huge wood weighing several tons is more similar to stone and very strong.
Looking at this baby Wood Sifan, he has a kind of own idea, but as the wood is dropped, the idea disappears. I did the construction myself. Now carving is to help with the task. By the way, I can earn a little money. Antique wood and other money will be bought at the auction house later!
"Let ’s put the things on the ground. My people will take them away at that time. Keep away from you. All the things inside the factory are forbidden to watch!" Si Fan shouted loudly and drove the bodyguards away.
He looked at the front with such a scorching look. Master Song has now taken someone to the door of the factory building. Master returns to the car and does n’t know who to cook the phone congee with, while the bodyguard is slowly near the factory building. The patrol is probably afraid of running away.
The only thing that obstructs me is Miss Zhenghua Miao.
"Sister! Are you going to buy something to eat back? Or do something else?" Si Fan squeezed out a smile and looked at her.
Zheng Miaomiao froze and asked in surprise: "I have to leave too? Am I the same outsider you said?"
Suddenly, Si Fan was completely speechless: "Are you still my insider? These things can't be seen for the time being, you should go and do it. It won't take much time."
保持 In order to remain mysterious, Si Fan quickly coaxed Zheng Miaomiao and then quickly entered the factory building. At this time, there was nothing in the empty factory building, not even the fixed devices. The two all-around Terminators stood on the left and right sides of the door as if they were door gods. Carpenter-type Terminators are already on standby.
"Move all the wood in, the carpenter-type terminator begins to prepare, and inform me after scanning the image that is most suitable for sculpting the target!" Si Fan commanded.
The flash of red light in the eyes of the carpenter-type Terminator has begun. The two Almighty Terminators are choosing the wood, but their goal is a wood of boxwood that is about one person tall. It seems to be ready to be carved directly into Master Song. The image of dad.
At this time, Si Fan already had a target photo in his eyes. It should be the age of thirty-year-old Master Song's dad who was more than a few years ago. He stood on the pier with his chest raised and his right hand pointing at the mighty mountains and mountains. A lighted cigarette burns slowly.
I was like art with both pretense and awesomeness, fixing the moment when this man was the most powerful.
"This image is okay, just follow this. What flaws show up after the engraving!" Said Si Fan.
The picture in front of Xun changed again, and now the complete wood appeared in front of Si Fan. He almost spurted blood when he saw it at first glance.
I saw that the first blade of cutting light is to cut away a quarter of the wood! The thickest piece of wood is rolled to the ground first, and then the wood is continuously roughed, and the surrounding wood is cut down a lot, leaving only a large frame, and the excess waste seems to be quite a lot.
After rough machining, the flashing speed is comparable to 32 times the fast forward speed, which is almost blinded by Si Fan ’s 24K golden dog eyes. It is only ten seconds. The simulated statue has appeared in front of Si Fan. The statue in front of it was flawed in several places.
It seems like the cigarette that was originally lit should be new, but now it seems to have been cut off, and it looks very awkward. Another is that there is such a small crack on the back of the statue.
This crack is very shallow, but it is definitely a major problem.
Looking at the statue, Si Fan nibbled his lips: "It seems that the problem is not great, but it is not possible to solve it. After the red, you help me to graft the burning point of the cigarette to the top of the wood that is now acceptable.
He also saw that this place was a nodule on the tree itself, which could not be sculpted, but after the red was perfectly grafted with the burning cigarette butt, it seemed that the cigarette in the hand of the statue was shortened to the position where it was about to burn to the Perfect, absolutely flawless.
There was only a problem with the position behind the statue.
This is a long crack about one millimeter deep and two centimeters deep. The scar is not too hurt, but it is not easy to cover up.
Staring at the damage for a long time, Si Fan thought of a solution.
"After the red! Try to change the cracks to the folds of the clothes or the ripples of the clothes after the wind blows." Si Fan tried again dozens of times, slowly adjusting the final effect until the moment the final version was finalized. It is difficult to find a more perfect way. This is a flaw, there is no way.
看着 After looking at this most pleasing design, Si Fan nodded.
"Okay! Just start processing according to this drawing, UU reading www.uukanshu.com What tools or materials do you need to tell me!" Si Fan just finished, and saw the two all-around terminator almost at this time Turned into a manual fixture, the two Terminators took almost the same action to pick up the wood to fix it, and then saw two carpenter-type Terminators standing on both sides to start rapid forming, cutting the waste, and the waste was as much as possible Stay intact.
In just less than five minutes, Si Fan saw a clear outline appearing in front of himself, and there was a pile of waste material underground. When the processing was carried out at this moment, he could already see the shape of the sculpture, waste material. It's all settled, and finishing processing is started.
看到 I saw the arms of two carpenter-type Terminators changed from the large cutting tools and quick cutters just now to small precision engraving knives and began to finish.
The efficiency is fast, and it has refreshed Si Fan's concept of machining. The dazzling robot arm almost brings out the afterimage. The tools carried on a pair of arms are very complete. It seems that there are no carpenter tools that their arms cannot turn into.
司 When Si Fan yawned and checked the phone's WeChat by the way, the statue in front of him could be said to appear in front of him vividly. It was a spirited image of a middle man, so confident and calm. It is just that the two carpenter-type Terminators have not finished carving yet, but have developed dozens of pairs of engraving knives as large as embroidery needles from their arms and started finishing.
Only then did Fan Sifan know that Terminator's requirements for furniture were so demanding. The current manufacturing is just a small shock, and the fine-grained craftsmanship is even more amazing.
UU Reading Readers are welcome to come and read. The latest, fastest and hottest serial works are in UU Reading! Mobile users please read.