Chapter 74: Fusion power generation equipment

......
With a super plug-in such as mind and mental perception, Wu Hao assembled a simple 3D metal printing smelting equipment is naturally very fast.
In less than 20 minutes, Wu Hao did all this and concentrated all the existing power on this simple 3D metal printing device.
After all, I want to make those metal raw materials completely smelted, and then the power required for printing and molding is quite a lot, so Wu Hao now has all the computers and lights in the base turned off, in order to save all the electricity to supply this simple 3D metal printing equipment.
Due to the ability of mind and mental perception, the fact that the light is not turned on does not affect his work. However, if the power of the base is sufficient, he is naturally used to the bright space.
Soon, Wu Hao began to officially start. The first thing to do is the outer casing of the fusion reactor. The shape of the spherical shell is very complicated, with many complicated internal structures and metal pipes that open the outer door.
Inside the metal device, there are several layers of devices, and finally the internal magnetic field device.
In this way, in the next week, Wu Hao began to build the reactor and the corresponding energy conversion device as well as the steam turbine generator set, cooling system and so on.
The number of parts required for all of these devices is extremely large, and there are many metal materials required. Therefore, while Wu Hao was manufacturing on the side, he had to purchase a large amount of metal raw materials again.
Fortunately, these metal materials selected by Wu Hao are not restricted military special metals in China. He directly placed orders in some large steel factories in China and then shipped them to Chang'an City, the nearest city.
Then, Wu Hao naturally can only act as a porter at night. Although the volume of these metal crucibles is not large, the weight is not light, so Wu Hao does not carry much.
A few tons of metal steel, in fact, it seems a little bit. Therefore, Wu Hao basically has to carry it for several hours every night.
Some of these metal steels purchased did not meet the requirements of Wu Hao to make some parts, so he must melt these metals and add some rare metals to increase their strength and hardness.
Although Wu Hao can only improve a little, it can't improve too much, but basically it can barely be used. At most, it is less time in life, but as long as the base has energy, it is not difficult to develop a metal material with better strength.
For example, Wu Hao is now able to do the manufacturing of special metal technology in various countries. Only want to mass production, it requires a lot of equipment and construction sites.
Therefore, Wu Hao's base can only achieve a small number of special alloys, and these alloys can only be used as some key components.
Now, these key components used by Wu Hao are basically purchased, and his current ability can not be processed by himself.
However, in a week's time, Wu Hao completed the manufacture of the reactor, and the rest of the work converted the energy of the reactor into mechanical energy, and then led the generator set to generate electricity.
According to the progress of this work, Wu Hao still has to spend a week to get it. Now that Wu Hao is engaged in nuclear fusion reactors, the source of raw materials for this reaction is much simpler than before.
Because the raw materials used in nuclear fusion are the isotopic elements of hydrogen [dao] and [chuan], which are widely distributed in nature. The most abundant place in the world is the ocean.
Therefore, Wu Hao wants to obtain the raw materials for nuclear fusion, which is much simpler than fissile raw materials. He can get it in China because it is not used by ordinary people.
You said that you want to use it to make ? Then you want to detonate the , you have to make an atomic bomb first.
In fact, in many foreign countries, there are many nuclear physics enthusiasts in the private sector, who manufacture small nuclear fusion reactors in their own homes or garages.
However, the reaction they make can only be done with simple luminescence and heat, which itself does not release too much energy.
After all, even the world’s countries have spent huge sums of money to use a lot of manpower and material resources to achieve this. These folk masters are just doing it again.
If they really can master this technology, they have been pulled into the country to help develop fusion energy.
However, after Wu Hao's nuclear fusion reactor has entered normal work, he still has to have a complete place to refine raw materials. Because by that time, the amount of raw materials he needs will definitely start to increase, and it is not realistic to buy it by purchasing or other means.
In this way, Wu Hao once again busy the six days, finally completed the last process, for the whole set of fusion reactor power generation equipment designed by himself, Wu Hao has not officially started. But since he has done all the simulation work in his own brain, he is not worried that he will not be able to work normally after starting.
After all, in this ten-day manufacturing process, all the parts and all the structures were finally assembled and assembled after detailed calculation and confirmation.
"There is no white work, as long as the fusion reactor is started, the entire base does not need to worry about the power problem. The diesel generators that are like noise can be used to melt the raw materials." "Wu Hao has been busy for so many days, the whole person is naturally very tired.
From his design to the final manufacturing, it took a month or so in total, and it was only because of his own power and mental perception that he could have such a fast manufacturing speed.
If Wu Hao does not have the power to help, then even if he has a very complete and detailed drawing in his mind, even if he has a strong industrial base as a support, he wants to complete a nuclear fusion power generation facility without a half year or a year. It is impossible to do it.
Because the processing of these parts is a very complicated and cumbersome thing, and at the end of the manual assembly, it is necessary to carry out very detailed debugging and so on.
Not to mention the manufacture of high-tech facilities such as nuclear fusion reactors, even in some projects where growth lines and other related equipment are installed, from installation to commissioning to formal operation, during which time it does not take a long time. Row.
......