Chapter 718: Chip (below)

The chip is still the original chip, but many of the package parts have been ablated, revealing the circuit and revealing the chip structure.
Obviously, this has been studied.
When I saw this chip, Guo Tailai knew what it was because of this moment.
At that time, the 8086cpu, Guo Tailai used 50 nanometers of processing precision, which was more accurate than the latest Pentium III 0.25 micron process at that time. 0.25 micron was 250 nanometers. Guo Tailai's accuracy ratio at that time. The Pentium III is five times higher.
Even the new Pentium IV 3.06ghz processor is now using the 130nm process, which is twice as accurate as the Pentium III, but it is still not the opponent of Guo Tailai's handmade chip.
"Yes!"
Guo Tailai nodded and admits: "The work of a few years ago.
Uncle Uncle, this chip, why is it here?

This is Guo Tailai's own sample for the company. It is reasonable that it should not appear in the hands of the military. Now the colonel officer actually took it out, which made Guo Tailai very surprised.
"I will explain it."
The colonel officer did not wait for the general to speak, and immediately explained: "When we talked with your company's chip designers about the difficulty of making encryption chips, your designers thought it could impact the more difficult design, and we don't think so.
According to the complex chips designed by your employees, we believe that the size of the chip may exceed the size limit and cause heat dissipation problems, but your employees do not think so.

Guo Tailai asked how the generals’ chips would go to the military. In fact, they questioned why the military directly took away the company’s technical information.
It is a matter of principle.
"When you argue, your staff took out the chip to prove that the chip size can be limited to our limits."
The colonel officer also knew that Guo Tailai would be very unhappy. He said quickly: "We asked the superiors and, after consulting with Mr. Mi, took the chips for research."
Mi Feifei also nodded next to him: "Yes, boss, I agree."
Guo Tailai nodded slightly, since it was agreed by Mi Feifei, there would be no problem.
She is a company ceo and certainly has the right to make a decision.
"How is the research?"
Guo Tailai rushed to the school officer to ask a question.
"Unbelievable!"
The colonel officer tried very hard to express his opinion. He said that it was incredible or that he could not express it clearly. He couldn’t help but continue: "I don't know how this is done, but it is obviously better than any light in our country." The engraving machine is sophisticated.
To be exact, it is more powerful than the most advanced technology in the world.

Chips can be made in China, but they can only be low-precision and low-efficiency. The latest and highest-level equipment is definitely embargoed against China.
Sometimes, the military can only find ways to purchase and use civilian chips to perform certain functions, and the design of civilian chips obviously cannot fully meet the safety and stability requirements of military chips.
Although the military chip may not be the latest in technology on the market due to the stability requirements, the domestically produced chips still cannot reach the same level as the similar chips in foreign countries.
Suddenly, Guo Tailai was able to create a chip that was more sophisticated than the latest technology chips from abroad. People who have the right to know are almost all in a big prize.
It is not necessary to reach the level of the 50-nanometer process of Guo Tailai's chip. As long as it can achieve 150 nanometers, the domestic chip industry will directly rush to the international leading level.
All the industries related to this, from research to military to aerospace and even to the satellite industry, will have a huge leap forward.
Using a simple example to describe, with satellites, all the chip area can be reduced to the original quarter or even smaller, the integrated circuit can do more sophisticated, the same size and weight of the satellite can achieve the function In the case of the same thickness of the chip, the simplest is also four times higher.
Take Guo Tailai's communication satellite, four more communication modules, the total bandwidth can be increased by four times, the channel that can be serviced is increased by four times, which is only reduced by half the length of the side.
Obviously, if you can do 150nm process, I am afraid that it will be more than half, and Guo Tailai can still be smaller.
"Is energy production?"
The general asked me to intervene eagerly.
Guo Tailai’s questioning is not welcome, but the generals are not angry at all. He is more concerned about what Guo Tailai can do.
"No!"
Guo Tailai shook his head very honestly: "That was hand-carved.
Each piece takes a different amount of time depending on the number of transistors, and the efficiency is extremely low.

Obviously, this answer does not satisfy the generals. He is very disappointed.
If Guo Tailai energy production, then the various chips used by the military will be greatly upgraded, which is a revolutionary upgrade for the information construction of the entire army.
"Guo Zong, since you have this craft, is it possible to build several high-precision lithography machines yourself?"
The middle-aged man who had never spoken at this time finally opened his mouth and went straight to the point.
"If there is a detailed design of the lithography machine, I don't think this is a big problem."
Guo Tailai replied with a smile: "I am not particularly proficient in this part of optics, but if there is a complete design, it is only processing and assembly, there should be no problem.
The processing precision of lodtm can reach more than ten nanometers. At present, the precision of the lithography machine has not reached this level?

Guo Tailai’s words made everyone’s eyes in the conference room light up.
correct! Although Guo Tailai's hand-processed chips can't be mass-produced, Guo Tailai can be used to make high-precision lithography machines! With a high-precision lithography machine, I am afraid that high-precision chips cannot be mass-produced?
Originally, middle-aged people still want to use other methods to verify it, but after hearing the name of lodtm, they will not say anything more.
Guo Tailai has already built such a precision lathe, and there is no need to prove anything.
Just like in the manufacture of super-running, the car designed and manufactured by Mr. T no longer needs to run any track to prove it.
The principle of the lithography machine is actually known to many people in many countries, but there are very few that can be done.
Now, Guo Tailai's hand-made chips let everyone immediately see a completely different prospect.
"Why don't you say that early?"
Some of the generals hated the iron and asked for it.
This chip is a matter of several years ago. If I knew it early, wouldn’t the domestic chips lead the world?
"Nobody asked!"
Guo Tailai’s face is called:
Last year ago, the lithography machine was included in the national 863 major scientific and technological research plan?
I don't know the lithography machine. I just know how to process and understand the assembly, but I don't really understand the optical etching!