Chapter 190: Advanced CNC machine tools

Machine tools are just a general term. In detail, it can be divided into milling machines, planers, grinders, drilling machines, etc., to process different parts, different machine tools are needed.
Now, if you want to process high-pressure oil pumps, you need a milling machine and a grinder. A multi-axis milling cutter cuts out the shape, and then uses a high-precision grinder for grinding.
Qin Guan looked around in the machine tool cemetery.
This one is too cumbersome and looks like an old fashioned stuff, it won't work.
This one is not bad, it still shows on the LCD screen.
Wait, no, this one is too advanced.
Qin Guan must be cautious.
He can exchange Xiaolong to give the most inspiration to the aircraft designers, but now, he can’t move too advanced things into the factory. It won’t take a few days, even the ants of the factory will know about it and make it by himself. The machine tool that comes out is even more advanced than the world's most advanced level.
In that case, spreading it out would be very detrimental to him, and Qin Guan must be careful.
Too advanced is not good, too backward is not good, after walking for a long time, I finally saw one, C400 horizontal milling machine, three-axis linkage, the display interface is an ordinary seven-segment digital tube, and there is a data interface, which looks high-end Atmospheric grade, but when you look at the production date, it was produced in 1990. According to the gap with foreign countries, it is equivalent to the level of foreign countries in the 1980s. Okay, this one!
The spirit point needed is not high, only more than two thousand, and now Qin Guan doesn't care about the upper limit of 10,000 points.
Qin Guan started the exchange.
After many exchanges, Qin Guan is already familiar with this kind of spatial energy flow. With the flush of space-time energy, this CNC machine tool will return to its original state.
This is a three-axis milling machine, and then another grinder.
Compared with a milling machine, a grinder is much simpler, the hand and foot are exchanged quickly, and Qin Guan exits the system interface.
"Come out." Qin Guan shouted outside.
When I was exchanging, I knew Xiang Jing was secretly hiding nearby. Now, as Qin Guan shouted, Xiang Jing carried the camera and appeared in front of Qin Guan: "I just wander around, if it's okay. , I'm leaving."
All right? You don’t have enough eyes, and you use a video camera to record the process of my exchange, thinking I don’t know?
However, even if this is recorded, what can you find?
"Come, let's take a look, what's in your video recorder?" Qin Guan asked.
Take a look? Xiang Jing barely showed composure on her face: "Well, forget it. Finally, when the editing is finished, I will show you."
"No, it's all right now." Qin Guan said, reaching out to grab the camera in Xiang Jing's hand.
At this moment, Xiang Jing had originally planned to dodge, but for some reason, at this moment, her head began to dizzy, and she had no strength at all, so she watched as the camera was robbed.
Qin Guan opened the replay.
Suddenly, the scene just now appeared. The video tape was spinning. The scene just now was played back clearly. You can see the old machine tool in front of Qin Guan. Suddenly, it turned into a new machine tool. , Although the new machine tool is smaller, it is very exquisite at first glance. It has a sharp milling cutter, a clean screen and a sci-fi atmosphere. Who has seen such a machine?
Other than that, there is nothing left.
"Look at what good things were there before." Qin Guan said, pressing the playback button, and the video tape was spinning. When it was played again, only wet water vapor was seen everywhere, in the water vapor. There seemed to be a small woman who was stretching her body under the shower head. When she turned her head, she gave a front close-up shot, exactly the same as Xiang Jing in front of her.
"Xiang Jing, why are you..." As soon as Qin Guan's words fell, Xiang Jing roared: "What are you looking at blindly, girl things, messing up? I'm going to dig out your eyeballs!"
Despite saying this, Xiang Jing grabbed the camera and walked out.
Ashamed, ashamed, when I was in the bath, I forgot to turn off the video recorder!
Qin Guan shook his head, girl? That body, the beauty of muscles is exposed, where is the appearance of a girl? Also, those scars are so conspicuous, oops, if you sleep with a woman like this, you won't be scared to wake up at night!
Qin Guan shook his head, hoping to quickly forget what he had just seen, but the more he wanted to forget, the more that scene appeared in his mind.
Go, go quickly!
At this moment, the outside door opened: "Qin Guan, I'm here."
It was Heribala who came in, and he was busy for another whole day: "I have assigned all the workers in the new engine workshop. They are all selected elites. The other workshops are not happy yet, but I said it was you. They can only release people as ordered."
Heribala’s eyes are bloodshot: "When the new workers come in, the workshop will be able to run at full capacity. Now, the assembly of our first truck has already started, and this high-pressure oil pump is the only thing left. .Huh, what is this?"
Qin Guan didn't want to be Zhuge Liang, he would do everything by himself, and in the end it would be exhausted.
The physical quality of model worker Zhu Chongba is not reachable by ordinary people, and it is best to leave it to the person he trusts most. For example, now, Heribala has been completely trained by herself.
"Numerical control machine tools." Qin Guan said: "As long as we have skilled workers, we can complete the processing of our oil pumps. After the oil pumps are processed, they can be tested."
CNC machine? It is said that this is an advanced thing! Heribala approached immediately and stroked it lightly. The paint on it was still brand new and looked quite good. Also, what is this?
"The data cable socket, connect it to the computer," Qin Guan said.
Qin Guan doesn't know much about CNC machine tools. After all, he is not in this major, or in other words, there is no line he is proficient in, he only understands superficially.
Now, looking at the socket, which was very similar to the parallel port of the oldest computer, Qin Guan couldn't help but say, but after just finished speaking, Qin Guan suddenly realized what was wrong.
bad!
In order not to be noticeable, I chose the products designed by Han Guo in later generations, which are basically on the same level as the most advanced ones in this era. However, Qin Guan seems to have missed something.
Numerical control machine tools have microprocessors inside themselves, but if they want to achieve high enough precision, they must be operated by familiar people.
When debugging the machine, a data interface is needed and an external computer is needed!