Chapter 251: To do a lithography machine

浩 Li Hao looked at the performance of the company's employees and he was very satisfied.
This matter is that after hearing that Han Xuan was pregnant that day, he discussed with Zhou Yunsheng. They talked about that most people are now dual-employees.
Preschool children are hard to educate and love group activities. The employees gave their children to their parents, and they were worried that there was a generation gap between the two generations.
When I was sent to the kindergarten, I didn't know the management level of the kindergarten. If I met a beast teacher, it would have a lifetime impact on the child.
Li Hao proposed this benefit treatment to better win over the company's employees. Zhou Yunsheng contacted the kindergarten a few days ago. Just take this opportunity to announce it.
After the employees celebrated, Sun Kai took them away gradually. Back to your company to reward and reward the merited people.
Li Hao came to Zhou Yunsheng and said to her, "Yunsheng, you have been affected these days. I have not been in these days. You have assumed all the company's responsibilities and organized the company's management.
Zhou Yunsheng said with a smile: "This is nothing! It is also my responsibility. I will be assured when you return. I really don't understand the scientific research."
What suddenly came to her mind? Eyes brightened and said: "Director Guo Jianzhen reported yesterday afternoon that they didn't understand what kind of metamaterial or alloy they made in the laboratory. But he said that this material has special properties and seems to have important uses.
I can see his overflowing joy across the Internet. "
Li Hao and Zhou Yunsheng talked about the company for a while. He saw Zhou Yunsheng walk to the office and continue to handle the company's administrative affairs.
He turned and walked downstairs to see what materials Director Guo Jianzhen had developed. Make him so happy.
Li Hao walked to Guo Jianyu's laboratory and saw that there were fewer scientific researchers in it than when he came last time. Only a few experimenters are sorting items.
He quickly found Director Guo Jianyu in the materials laboratory. He was hitting a very thin laser beam across a glass cover, two metal sheets stacked on top of each other.
The left is purple, and the right is blue-gray. The area where the laser was ablated in the middle was orange.
After Guo Jiandi saw Li Hao coming in, he came over and said, "Everything Li, the idea you put forward really succeeded.
I did not expect to add certain conditions in special solutions. Metal ions can also polymerize.
They can also produce stable compounds, which will open up a new field of chemistry. The contribution to basic science and materials science is too great. "
Li Hao heard that Guo Jianzhen has basically copied the technology of alien civilization. He said happily: "I just thought about it. I didn't expect that this wild idea really succeeded.
Director Guo, if you find this phenomenon, you will be famous in the history of chemistry. After you understand their laws, you can publish brief papers. "
Guo Jianxi said humbly: "This is the honor that President Li and I have done together. The author of the thesis must also add President Li."
Li Hao waved his hand and said, "You don't need to bring me this honor, it is the result of your laboratory's efforts.
I still look at the efficient performance of the materials developed by this technology. "
Li Hao saw that there were very few scientific researchers in this laboratory. He asked Guo Jianying: "How can our company have fewer scientific researchers?"
Guo Jianzheng and Li Hao said: "This is not the scientific research building is designing the decoration plan, the designer should design according to our needs. Most people go to observe the structure of the scientific research building.
And integrate the needs of your own project team to design a laboratory that meets your project team. It happens that this material has been developed, and we have no major issues. Experiments can be done by scientific researchers with internships. "
Guo Jianying pointed to the materials on the experimental table and introduced Li Hao: "This is an alloy composed of the polycopper material and the polyzinc material I studied.
We make common materials in this way, but our company has limited equipment. I haven't found any function yet, just test it in the usual way.
During the research of the laser communication station, our laboratory tested the laser film proposed by President Li.
By chance again, a high-energy laser was hit between the polycopper material and the polyzinc material, and the vaporized material was aggregated to form a polymetallic alloy.
But it hasn't caught our attention yet. Let us pay attention that this new type of polymetallic material reflects the sunlight like a mirror, and immediately reflects and refracts the laser to disperse it into a subtle laser beam and hits other materials. .
The material itself cannot withstand the extremely high heat, but it has the property of reflecting laser light. This material is safe when exposed to laser light.
One of the bad things about this material is that it is extremely unstable. It easily breaks down in the sun.
We are using laser to melt two polymetallic materials to find the best combination of these materials. "
Li Hao heard Guo Jianyu say so much, he asked in confusion: "Did you make great efforts to develop this material, did you see the prospect of this material?"
"It is of course that we can already control laser beams of two to ten nanometers through this material.
This is the fine-tuning laser technology that many science and technology dream of. Not to mention the other, let me say that Mr. Li is very familiar with the chip.
After the success of this technology, we can completely develop a lithography machine with a processing accuracy of two nanometers.
Although the performance limit of silicon-based chips is now seven nanometers, carbon-based chips have been developed now, and their limits are much higher than silicon-based chips, which is the future development direction of chips.
Unless quantum technology explodes, otherwise lithography machines will be used to process chips in the future. "
Li Hao said with surprise: "This material can make a lithography machine ~ EbookFREE.me ~ We must make a lithography machine.
This is one of the biggest shortcomings in China's machinery and equipment field.
The chips we import each year have surpassed oil and become the most imported products.
It is not that China does not have high-quality chip processing technology. Godson's chip design is good, but its quality cannot be mentioned is that the chip production line has only 27 nanometers of lithography machines. "
Guo Jianzhang said helplessly: "General Manager Li, I am very confident in making this material. It is the core component of the new lithography machine.
But a lithography machine is not only excellent in materials, it also needs talents in intelligent control and machinery. Our materials and chemistry labs don't have this talent. "
Guo Jianzhang felt helpless. He just wanted to brag about more and get some funding for scientific research. Unexpectedly, President Li asked him to develop a lithography machine. This is really difficult for strong men.
Through his speculation, plus the simulation of a virtual scientific research assistant system composed of the second-generation virtual reality equipment. He saw that this material has the potential to make the core parts of a lithography machine.
"You only need to study the stable composition of this material, and the rest will be coordinated by other departments of the company. We must get a lithography machine, which is the next focus of our company." Li Hao said with great pride.
Since this opportunity exists, the company must seize it. Every time a new material is discovered, an industry can change dramatically.
He will use this opportunity to guide this change to the field of lithography machines.