Chapter 284: Lithography machine prototype

Li Hao and Zhou Yunsheng soon came to the laboratory where the lithography machine project was located.
This laboratory has been built for a long time, and there is no underground garage. Then you can't take the elevator directly to the laboratory through the underground garage.
The two of them, with their bodyguards, could only walk towards the laboratory under an umbrella.
Li Hao came to the laboratory, he saw the staff inside, working in an orderly manner, without any nervousness about the lithography machine's upcoming experiments.
He nodded secretly, the atmosphere was better than the tense atmosphere of everyone.
From their calm attitude, Li Hao speculates that the lithography machine has a solid foundation, and the staff here are not worried about the failure of lithography opportunities.
As soon as Li Hao entered the lobby, he saw Sun Kai come over to meet them.
"Mr. Li, you came very early. Now the prototype of the lithography machine has been assembled and placed in the dust-free laboratory.
Members of our project team are testing the performance of lithography machines by remotely controlling the robot. Sun Kai came to Li Hao and briefly introduced the progress of the lithography machine.
"The headquarters of the group is all right, so I will come and take a look. We still look at the prototype of the lithography machine like a dust-free laboratory." Li Hao ordered with some expectation.
Under the guidance of Sun Kai, Li Hao and Zhou Yunsheng came to the laboratory where the lithography machine was located.
A large box can be seen across the transparent glass screen. Robotic arms are constantly detecting what will happen indoors.
Guo Jianzhang They operate a virtual light curtain, which is being commissioned in a dust-free laboratory.
Li Hao said with emotion: "Manager Sun, your project team is full of confidence. You should have great confidence in the formal experiment today.
It's not just the employees in the lab who are confident, I see that there is no tension at all. More calm than the researchers in this lab. "
Sun Kai didn't want to carry the pot. Who knows if this test can be successful today, he replied with a bitter smile: "General Manager Li, the staff outside did not know that the lithography machine was testing. They certainly did not respond.
This is not a formal test for the whole machine. It is a verification experiment conducted during the development process.
The meaning they represent is completely different. Of course, I will not mobilize teachers to inform everyone, but the relevant personnel will come to the laboratory to handle it. "
Li Hao froze, then maintained a smile. He had been fully concerned just now. Think about it, that is, most people are confident that the prototype of the lithography machine can be successful at one time.
But as long as some are skeptical, the staff outside can't be so quiet. The only possibility is that they really don't know what to experiment with.
Li Hao waited for a while, and he saw Guo Jianyu that they had finished debugging the lithography machine. The box covering the outside of the lithography machine has been removed.
When he looked at the lithography machine, he could not see the appearance of a normal machine. The main thing is that there is only the skeleton and main equipment inside, and the gears and bearings inside can be seen directly from the outside.
This lithography machine is an iron shelf supporting several auxiliary equipment.
There are many drive shafts and gears underneath, and a disk in the middle. It looks like an antlers, where multiple stacked laser emitters are installed.
Zhou Yunsheng looked at the lithography machine, and she covered her mouth and said, "This one is too rude. It doesn't matter if it has a shape with a sense of science and technology.
This shape is completely negative, and many people will not buy our machine when they look at this device.
Even if it is the prototype used in the experiment, you should use more snacks and make it look better. "
Sun Kai immediately explained: "This is only a prototype for the experiment. During the operation, you don't need to know what problems will occur. The absence of the casing is for easy maintenance.
Besides, time is tight. We just arrange the main structure, and the shell has no time to deal with. "
Li Hao said indifferently: "It doesn't matter if there is no casing. The key depends on its performance, as long as the performance meets our pre-designed requirements.
The lithography machine project has achieved phased success. This is the most important.
Making a shell is very simple and not complicated at all. "
After Guo Jianzhen debugged the lithography machine, he also walked to Li Hao.
He pointed to the lithography machine and said, "The disk in the middle is the grating we have worked hard for.
After unremitting efforts, our materials and chemistry laboratory has finally developed qualified grating materials.
Inspired by Professor Wang Rongzhe, we have gone through hundreds of experiments. Technology was found to delaminate grating materials. It completely solves the problem of the path that the crystal inside the material blocks the light. "
He subsequently said with emotion: "Most of our laboratory's scientific research team is solving this problem and has delayed the progress of many projects.
If this experiment is successful, I can drop this project and try to explore the properties of polymetal alloys.
Through frequent experiments on the grating material of copper-zinc alloy, I have thought of many good ways, and I look forward to trying them out. "
Li Hao looked at Guo Jianying and said, "Director Guo, you are lucky."
Guo Jianzhang replied with a smile: "It's all for the company's development, and that's nothing? I just hope that the results of our efforts can get valuable returns. This time, the lithography machine can successfully process standard smart chips."
When Li Hao and Guo Jianzhen talked, Sun Kai went to understand the preparation of the lithography machine, and he just came back.
Sun Kai said to Li Hao with a smile: "General Manager Li ~ EbookFREE.me ~ Our experiment is now ready, and the lithography machine can be turned on at any time."
Li Hao waved his hand and said, "Then don't delay time, just look at the performance of the lithography machine."
After hearing Li Hao's instructions, Sun Kai began to order the experimenters to start the lithography machine.
Li Hao saw that the robot in front of the lithography machine was already in motion. A piece of processed carbon-based semiconductor was clipped from the conveyor belt and placed at the entrance in front of the lithography machine.
At present, the chip production line has not yet been established. To form a chip truly, many machines need to cooperate together. For example, an etching machine that is less important than a lithography machine.
They now process chips and can only use pre-processed carbon-based semiconductor materials.
Li Hao saw the lithography machine process the chip, he asked in confusion: "I remember when the chip was processed, the whole room went dark. Don't need to do this now?"
Sun Kai replied with a smile: "General Manager Li, we don't need this at all. Last time, our lithography machine was not a lithography machine at all.
Don't look at the appearance of our lithography machine now, but it has all the functions of a lithography machine. The external light source can no longer affect the lithography machine. "
Li Hao stared at the lithography machine, and he finally saw that the smart chip was processed.
After the newly processed chip was transported by the robot, detailed inspection began immediately.
8)