Chapter 13: Accuracy enhancement

　　 Huang Changsheng’s factory is the largest. The annual output value exceeds 100 million.
　　 Compared with the other three, Huang Changsheng's machine tools are relatively new. One was used by someone else for five years. Most of the machine tools used by other people are ten years or even more than twenty years old.
　　 Looking at the West Lake Province, they are actually small shrimps.
　　 Even in the bearing industry, they are not big shots.
　　 It is almost impossible to buy a brand new machine tool. Especially the relatively high-end machine tools are extremely expensive.
　　 Seeing that Yan Ruzi was not there, Wang Buan quickly slipped away.
　　 A group of people came to Huang Changsheng’s factory.
　　 Before getting off the car, Wang Bu'an's heart was cold again.
　　 I thought that a few of them could be regarded as the level of the district team and the county brigade.
　　 Unexpectedly, it was completely skirmish!
　　The central enterprise is the national team.
　　Large private enterprises are the regular army.
　　Medium-sized private enterprises are Tuba Road, county brigade, district team, guerrillas, armed forces...
　　 The others are all skirmishers.
　　 just right, the four of them belong to the last.
　　 There is almost no profit for low-end bearings. They tried to extend upwards, but they encountered many resistances.
　　Raw materials, machine tools, software, technology, talents, market...
　　Everything requires hard development.
　　 Domestic CB7360C bearing channel precision lathe...
　　Domestic ZXH1300 disc milling machine......
　　 Domestic 3MK143 servo bearing outer ring groove grinder...
"that's it?"
"that's it."
　　There are only a few newer machine tools.
　　The others are almost all old models. The machining accuracy can only be accurate to 0.1 mm.
　　 What are the requirements for high-precision machine tools?
　　 at least 0.005 mm.
　　 is 20 times different.
　　The accuracy standard of some old models is only 1mm!
　　 Internationally, there are already many machine tools that can reach the standard of 0.001 mm. That is about 1 micron. The higher is the nano-level lathe.
　　 The distance is so far!
　　 is almost the distance between the earth and the sun.
　　 How to catch up?
　　 It is definitely not possible to rely solely on raw materials.
　　The bearing is a supporting project. In addition to raw materials, what is needed is precision machine tools.
　　 Then there is sophisticated control software.
　　 Then there are skilled workers.
Have it?
Have!
　　 But it's all in someone else's place.
　　 Now, Wang Bu'an has only rough machine tools, old software, and absent-minded workers.
　　 Because of insufficient orders, Huang Changsheng’s factory is almost on holiday. Only a few young people who usually perform well, have potential, and are willing to study hard, are still thinking about milling machine technology in the workshop.
　　 Among the more than one hundred people, there are only so few who can go to the Dao. The other people might get out of here.
　　 When some workers resigned, they left without even saying hello.
　　 The only commendable thing is that every corner of the workshop is clean.
　　 This at least shows that there are still people who love their workshops very much and are willing to take the initiative in sanitation.
　　 Attitude is very important.
　　 Wang Bu'an is very satisfied with this attitude.
　　 If you don’t even have the most basic attitude, even if you are given the most advanced technology, what good is it?
　　 How did the Sino-Japanese War of Jiawu fail?
　　 At any time, it is people, not weapons, that determine the final victory!
　　 "Number one, think of a way."
　　 "You let me kill someone first..."
"Think of ways to."
　　 "Okay. I don't have enough authority. I can only strengthen these machine tools to improve the precision. It is impossible to send a brand new lathe."
　　 "Then strengthen it."
"it is good."
　　 Wang Bu'an reached out and pressed a machine tool.
　　 Robot Elf No. 1 started moving quietly. The light that could not be observed with the naked eye quietly enveloped the whole body of the machine tool.
　　The metal used to make the machine tool has been highly compressed, making it more stable and firmer.
　　The bearings and drill bits have also been strengthened.
　　 The base, pillars, etc., have also been greatly strengthened.
　　The most important thing is accuracy.
　　The machining accuracy of the machine tool has been greatly improved.
　　With the strengthening of the various parts of the machine tool, the mutual gap, position difference, fluctuation, vibration, and impact force are greatly reduced.
　　 Its accuracy has been increased to 0.001 mm. This is the limit of old machine tools. It is also the limit of Robot Elf One's ability.
　　 In order to obtain higher accuracy, the entire machine tool must be transferred from the planet Cybertron.
　　 "The machine tools on our side are basically level 19." Robot Elf No. 1 said despisingly.
　　 "What level nineteen?" Wang Bu'an frowned.
　　 "It means there are nineteen zeros after the decimal point. The unit is nanometers."
　　 "……"
　　 Wang Bu'an was speechless.
　　 What number did the robot wizard say? He has no idea at all!
　　 But it feels very, very powerful?
　　 "By the way, how much faith is needed to be able to manufacture machine tools?"
　　 "Look at what type it is. At least 1 million start."
　　 "Aren't you industrial transfer? Why are there so many restrictions?"
　　 "If you are not sincere, it would be a waste to transfer the industry to you. If everything is at your fingertips, how can you cherish it?"
"Ok……"
　　 What others said makes sense, but Wang Bu'an was speechless.
　　 1 million is 1 million! Don't worry anyway! He is only in his early twenties. What are you worried about? There will be time in the future.
　　 There will be 1 million faith points one day.
　　 Work hard!
　　 Work hard!
　　 Continue to pick up girls!
　　 Continue to spend time and drink!
"Snapped!"
　　 "Puff!"
　　 During the strengthening process, the system automatically shuts down.
　　 The young workers who were operating were a little panicked, thinking that the machine tool was damaged.
　　 "It's okay."
　　 "It's okay."
　　 Wang Bu'an waved his hand, "It's none of your business."
　　 Huang Changsheng said in amazement: "What are you doing? Why did the machine shut down automatically?"
　　 "I moved a bit with the machine."
"what?"
　　 "Enhanced quality, improved precision, and updated software."
"what?"
　　 Huang Changsheng was stunned.
　　 Wang Buyan's words, he heard every word. However, he could not understand.
　　What does it mean to improve precision?
　　 What does it mean to update the software?
　　 There are no technicians on site! The parameters of the machine tool cannot be modified by ordinary people.
　　 "No change!"
　　 "The parameters and software are the same!"
　　 Huang Changsheng personally checked the operating system, and found nothing unusual. It's exactly the same as before.
　　 Indeed, the system software has not changed much.
　　 Only the unit has changed.
　　 used to be 0.1 mm.
　　 is now 0.001 mm.
　　 There is a difference of two zeros between the two numbers. That is, the precision is a hundred times different.
　　 "You continue to operate."
"Oh."
　　 Several young workers started the lathe again.
　　 One by one bearing jackets were produced, and they were piled up in plastic baskets next to them.
　　 Huang Changsheng subconsciously felt that there seemed to be some strange changes.
　　 But, what kind of change it is, I can't tell.
　　 Wang Bu'an did not explain further.
　　 "It's okay, you guys continue."
　　 "I look around."
　　 Wang Buan said casually, "Wait for me in the office."
　　 "Good." All four of them couldn't ask for it.
　　 They are not willing to follow Wang Bu'an for a walk!
　　 This guy seemed to stop and observe for a while in front of every machine tool.
　　What's so interesting about machine tools? They are all bored.
　　 In fact, Wang Buyan is strengthening the machine tool.
　　 Robot Wizard No. 1 can only be the enhancement of one machine tool.
　　 This function of it is called maintenance. In fact, it was aimed at the machine transmitted from the planet Cybertron. But it can also act on other machines.
　　 However, since it is called maintenance, it is impossible to make too many changes.
　　 It is impossible to change fundamentally.
　　 Before eating dinner, Wang Bu'an had completed the strengthening of all 138 machine tools.
　　 The precision has been improved to 0.001 mm.
　　 He returned to the office.
　　 "What are you doing?" Lin Wudong asked curiously.
　　 "I have carried out technical upgrades and technological transformations on all machine tools." Wang Bu'an said lightly, "In the future, they will all be treasures."
　　 "Really? How did you do it?" Lin Wudong was dubious.
　　 Others are also dubious.
　　 Especially Huang Changsheng feels incredible.
　　 "You come with me!" Wang Bu'an said, "I will explain to you in detail."
　　 "Okay." Four people hurriedly followed.
　　 A group of people entered the workshop.
　　 Wang Bu'an came to the oldest machine tool.
　　 The nameplate on the machine tool shows that it is manufactured by Dongying. It has a history of fifty years. It is the first lathe owned by Huang Changsheng. It's really old and very old.
　　 "The precision has improved."
　　 "The current precision is 0.001 mm."
　　 Wang Bu'an manipulated the software proficiently and explained to everyone straightforwardly. The four people finally understood. So that's what happened! That is definitely a great thing!
　　 You must know that it is impossible to enter the international market without high enough precision. Even the threshold cannot be crossed.
　　 The international standard must be at least 0.01 mm. Or 0.005 mm.
　　 Before, Huang Changsheng’s factory had difficulty receiving international orders.
　　 Now, there is finally a chance.