Chapter 109: : Unarmed Gundam

Xinzhuang looked at them not far and nodded, but did not rush.
He and his team drove directly to the construction site.
Seeing the sinking shaft, busy workers and various hoisting materials, Lao Bang stopped Zhuang not far away: "Zhuang owner, it's not safe below, let's go and see."
"Can you do that?" Zhuang not far away asked Old Bang.
"I just saw a lot of pictures of the shield machine, and I probably know what it looks like." Old Bang said.
Li Mingzhe: "..."
See a lot of photos? Can you understand the shield machine by looking at the photos? Sure enough the layman!
"Director Hong, I'll take you down," a minister hurriedly said.
The Minister of Tsang Yi respected the old Bang.
At the first glance of Lao Bang, he recognized that this was the so-called "saving peasant" on TV.
Farmer? Your farmer is a director?
But the directors of your family can't risk their lives and run to save people.
Because of this, he respects Old Bang more.
Only those working in the front line know how dangerous the situation will be at that time, and how powerful it can be to rescue people.
明 Li Mingzhe also put on a hard hat and followed.
I walked down the elevator to the bottom of the shaft and walked along the excavated tunnel. I quickly saw the shield machine in front.
"I finally saw you, cute little guy!" Lao Bang touched the inner wall of the shield machine, feeling as if he had seen the old man with his grandson.
Just now he was obsessed with the various construction sites hanging in the conference room.
Almost every scene is a picture of a large group of people standing in front of a huge shield machine. Now I can see with my own eyes, it is more shocking than the pictures.
小 "Little guy?" Li Mingzhe looked dullly at a giant shield machine more than ten meters in diameter. This behemoth, as big as a tunnel, would be called a "little guy"?
Geek!
Shield machines, tunnel boring machines, etc. are actually the same kind of construction tools. The emergence of shield machines can be said to be a revolution in tunnel engineering construction, and it is also one of the largest and most powerful engineering machinery. Old Bang is obsessed with it. This is not surprising.
"The problem is the cutting tool, which is the front." Old Bang looked around, and quickly passed the passage familiarly, and came to the front of the operating room, behind the cutting head.
Jain Sunlia's talent for machinery is unparalleled.
A minister hurried to catch up, and when he saw the knife plate, a minister took a breath.
The situation was worse than what his subordinates reported to him, and the cutter head in front even twisted.
"A ball hob on the left side of the cutter head was damaged. The construction staff did not find it, and continued the construction. As a result, a scraper stuck the rock and distorted the drive shaft ..." The construction officer in charge of the scene commander turned pale, but Big accident!
盾 A shield machine is too expensive. Companies like Xucheng Tunnel Construction cannot afford it and can only be rented.
In addition, cutter heads, knives, and drive units are among the most expensive.
This accident happened, and he couldn't afford to sell it.
"It is only distorted at present, if not stopped in time, it may even break ..."
The drive shaft still has a certain degree of toughness, and even a small twist can be handled, but if it breaks ...
Unfortunately, there is a huge rock stuck in the cutter head. The angle of the jam is very tricky. How to operate it may cause the drive shaft to break.
明 Li Mingzhe frowned.
I shouldn't!
In front of the shield machine, the rock is not like tofu, but it is not much harder than the foam, and the wear of the cutter head is just fine. The cutter head can be stuck, and the drive shaft is almost distorted?
"Poor little guy ..." Lao Banglong reached out and stroked the drive shaft gently.
He closed his eyes slightly, and it seemed that he could feel the twist angle of the transmission shaft just by hand.
It is said that skilled workers can sense a trace of error with their hands, the so-called trace is 0.01 mm.
In fact, this has exceeded the limits of human touch. They rely on experience, eyesight, judgment, and some strange intuition.
But there is no doubt that Old Bang can feel more.
"This little guy, I've been working too much for too long." Lao Banglong stroked the drive shaft lovingly, and then took a step forward, through the hole in the cutter head, probed his body to the front of the cutter head.
The guillotine disc was obviously tilted, and a slight deformation occurred. He looked at the stuck part, and as soon as he leaned in, he got into it.
董事 "Director Hong, it's dangerous inside!" A minister quickly grabbed the old Bang, "I'll just call someone to bring tools, drill in to break the stuck rock, and shut down for maintenance."
This kind of construction space is small and the environment is dangerous. It is not just a problem of collapse. If the rock is broken, the twisted main shaft will return to its normal crushing force, which is also fatal.
"Rest assured, I can handle it." Old Bang nodded to a minister, and then drew a small hammer out of his pocket.
The hammer is not big and looks rusty, like it has been idle for many years.
But when I looked at the handle, I found that the oil shined on it, I don't know how long it has been rubbed.
Hammer?
A small hammer not much bigger than a claw hammer?
Lao Bang slammed his hammer, drilled behind the cutter head, raised his hand, suddenly paused, and said to a minister, "Hide away, it's dangerous."
Danger? You said that little claw hammer is dangerous?
"Really, don't lie to you, stay away." Old Bang Rong waved again.
A minister took a few steps back, and then he heard a loud bang!
It's like someone has detonated an explosive and the stones are splashing!
The flint stone hit the shield of the shield machine and made a jingling sound, like a messy percussion.
The next second, the drive shaft made a slight "creak".
The deformation of the trowel disk was restored, and the twisted and jammed drive shaft was restored to normal.
A minister is a bit aggressive.
到底 What the is that hammer? Is Thor's Hammer?
"Who, you come to see!" A minister carefully probed out, the old bang saw him, beckoned him to pass.
Li Mingzhe also cautiously drilled his head through a hole ~ EbookFREE.me ~ Seen from the front, three cutter heads were damaged, a ball hob was completely broken and a wedge hob was also damaged One scraper even twisted it all.
明 Li Mingzhe is also an old engineer. At first glance, he felt that the damage to these things was abnormal.
The blade of the shield machine is very hard and cannot be twisted like noodles.
"Give me the tool replacement record and shield machine maintenance record." Li Mingzhe reached out to the staff behind him, turned it over, and suddenly his face sank.
"Come here, take down these three knives!" A minister also frowned, and before he said anything, he saw the old bangs using his hands to remove the knives from the slot!
Removed!
Is not the person I saw at the scene, I do n’t know how shocking the scene is!
This is a shield machine, not a precision machine.
Although they are called knives, they look completely different!
The hob hob is like a stone roller with countless metal teeth mounted on it. When it is taken into the movie, it can probably crush all the vehicles on the street into fragments.
The spatula is almost as large as the door, and the thinnest part has a thickness of a few centimeters. It is not like a knife at all.
"咚, 咚, 咚!"
In the dazzling movement of the old bang, two hobs larger than the tire and a door-sized scraper were thrown on the ground and made a crisp impact.
A minister stared blankly at the old bang. This thing weighs a few tons!
老 Then the old bang banged one with one hand, one under his arm, and took the three removed knives back to the back of the shield machine.
I go, is this the rhythm of demolishing Gundam by hand?
Auntie! Monster!