Vol 2 Chapter 1311: Production line improvement plan, current status of magic mechanics

The Tower of Time.
As the saying goes, "Little don't win the newlyweds", the morning after Xia Duo came back, he reluctantly let go of Niya until the magical moment reminded him many times, and then the two got up together.
After breakfast, Niya went to the study room on the top floor to continue studying her communication fan lock, while Xia Duo went to the public floor, ready to see the production of the Talisman of Slaughter.
Before coming, he had already learned from Niya that the production line of the Demon Slayer Talisman was placed in the public floor at Work Room No. 023, so this time he went straight to here without giving the relevant personnel any preparation time.
Pushing open the door, the most realistic production scene of the Tumo Talisman production line appeared in front of Xia Duo—
Two parallelly extending workbenches intersect at the end of a section close to the room. Seven alchemy circles are distributed on specific positions on them, which can be used for 21 people to work at the same time.
However, at this time, there were only nearly 30 magic mechanics that Xia Duo could see, crowding the vicinity of the workbench.
But the large number of people does not mean chaos. On the side of the seven alchemy arrays, there are actually only 16 people who need to operate the array to make the mithril components needed for the amulet of killing the devil.
Others, most of them are the supporters of these sixteen people, who provide auxiliary lines or precise measurement of magical support; a few are the final assembly and packagers of the later period.
In an instant, Xia Duo saw the entire production process of the Talisman Tumo's early stage-from the small mithril particles to the delicate mithril components, to the prototype of the sterling silver encapsulated amulet after the final assembly.
There is no link to the magic net, it is because Chateau asked Abbock to bring back the mass production design plan only two days have passed, and today is the third day.
Related personnel want to be familiar with the final production steps of the Talisman Tumo, which cannot be completed in a day or two.
"My lord!"
"You don't need to be polite, you are busy with you, I will just take a look."
Refusing the gifts from everyone, Xia Duo walked slowly behind the packager at the end of the production line, and three small wooden boxes without lids immediately came into view.
The inside of the box was divided into small grids of vertical and horizontal 66. The first box was already half full. Xia Duo glanced around and found that there were 29 small silver amulets lying quietly in the small grid.
He took two amulets at random and placed them in his palm. At first glance, they were two unremarkable small silver medals. There were no decorations on them, which formed a sharp contrast with other amulets.
But this is the characteristic of the Tower of Time—
Mass production!
It's not that you can't add patterns to the top, but it will inevitably increase the process and man-hours. For the task cycle of less than 20 days, it is still a bit too urgent.
As long as there is no shortage of core functions, those dwarves are in the midst of a war, and they have a bit of attention to appreciate the artistic accomplishments of a little talisman!
The mass production plan of the Demon Tumulus was studied by Xia Duo on the projection plane, and he himself was very familiar with this plan.
At this moment, he took the two prototype amulets, and he began to try to link them to the magic net, but unfortunately, only one of the two prototype amulets he picked up succeeded in linking, and the other ended in failure.
It was not that Xia Duo was unfamiliar with the steps of the Demon Slaughter Amulet linking the magic net, but the amulet itself, except for the problem, had a deviation in the final assembly of the mithril components inside.
Unless he immediately calculates a new link method based on this deviation, otherwise, one link will fail one, which is the main reason why the yield rate cannot reach 100%.
Thinking of this, Xia Duo re-looked at the current production situation of the production line and thought about what could be improved.
The current Tower of Time’s Alchemy Array is insufficient. Compared with the Alchemy Array in [Projection Plane·Remains of the Empire], there is still considerable room for improvement.
But for the production of Demon Slaughter Amulet, this backwardness is not a problem, the key is that his magicians have misunderstandings about the alchemy circle.
The alchemy circle is of course set up for production, but production does not mean only change and output. In fact, the entire process from raw materials to finished products belongs to production.
Mithril components can be shaped on the alchemy circle, as is the final assembly.
The Mithril components of the Demon Slayer Talisman are far less elaborate than the spell chips designed by Xia Duo on the projection plane, but they are also very small. In the process of completing the shaping and flowing to the final assembly, if there is a slight bump, it may be reworked.
In addition, it is not easy to assemble such small "parts" during final assembly.
What Xia Duo thought of was to equip the final assembly link with the alchemy circle. Even if the tower of time's alchemy circle was backward, the basic floating field would still be available.
The final assembly in a zero-gravity environment must be able to minimize errors.
It's a pity that these magic mechanics are not even official mages. If they have the spellcasting ability of those magic mechanics among the remnants of the empire, Xia Duo also has a final assembly spell designed specifically for the amulet of slaughter.
This further reduces the influence of human factors.
In addition to the final assembly alchemy circle, there is also the flow process of the Mithril components after they are shaped, and it is best to stay in the suspended field all the way.
Although this requires a certain degree of transformation of the production line, it is still worth the effort for the expected and increasing orders of the Demon Slayer Talisman.
After only seeing the two amulets, Xia Duo did not immediately stop the production line. Anyway, the working hours of these magic craftsmen would not exceed 4 hours at most every day, and it would not be too late to remodel them when they took a break.
…
After coming out of workshop No. 023, Xia Duo turned around and went to the magic mechanic's office at the same public level, where it was mainly used for information collection and personnel training.
In addition to the prototype of the amulet, there is also the most critical link to the magic net in the production of the Demon Slaughter Amulet. This part can be done by high-level mages, but the number of high-level mages in the Tower of Time is seriously insufficient.
Therefore, when UU Reading www.uukanshu.com is projecting the plane, when Xia Duo set up a project for Huck and others, he required to be able to decompose the process, so that low- and medium-priced mages can also participate in the process of linking the magic net, which is high. The order mage shares part of the work.
After arriving at the magic mechanic's office, Gardner greeted him and gave a slight salute. Chateau and Gardner were once the apprentices of Niya, and their relationship was much closer than ordinary mages.
The two chatted for a while, and then they talked about the recent development of the Magician Office—
"In terms of personnel, in addition to the 30 apprentice-level mechanics who were initially rehired, a number of them were later rehired. In addition, some of the official apprentices of the Tower of Time have also registered the status of magic mechanics.
"At present, there are 112 apprentice-level mechanics in the Magical Mechanics Department, of which only 52 are full-time.
"There are 9 junior technicians, of which 5 are full-time and 4 are part-time; there are 3 intermediate-level technicians, of which 2 are full-time and 1 are part-time.
"As for production, in addition to the previously mass-produced communication artifacts, vigilance talisman, missile wand, and wood pulp paper, the production line for the talisman of slaughter is also running in, and it shouldn't delay Lord Haran's order."