Chapter 227: High offset metal

"Professor Yan, is there any result from this experiment?" As soon as Zhang Heng came, he saw the bright metal plate surrounded by everyone, and a surprise flashed under his eyes, and he asked immediately.
"Yes, Director Zhang, but the specific effect will not be known until after the test." Yan Ronghua nodded, begun to say hello, lightly.
Zhang Heng didn't care about Yan Ronghua's attitude. Most of the scientists were proud, especially Yan Ronghua's scientists. If the other party is the kind of villain who is inflamed and greed for fame and fortune, he will not get the current achievement. If Zhang Heng had not spotted the other party ’s weaknesses and intimidation, Yan Ronghua would definitely not join himself.
Zhang Heng turned his head to look at the metal plate. At this time, a winking assistant had taken the metal plate from the crowd and brought it to Zhang Heng respectfully and respectfully, regardless of the dissatisfied eyes of the scientists around him.
Zhang Heng smiled and expressed his thanks. He reached for the metal plate and saw that the metal plate was only two or three millimeters thick. A person with a good eye could see that it was an ordinary aluminum plate, but Zhang Heng knew that this aluminum plate was never ordinary.
He grabbed the two ends of the aluminum plate and pulled it hard. Originally, the very soft material of aluminum, coupled with a thickness of only two or three millimeters, could be easily bent by any adult, but Zhang Heng took it with him , The aluminum plate is still moving!
The surprise in Zhang Heng ’s eyes was more intense. He continued to work hard. With his strength, let alone aluminum plates, even tiles that were harder than steel could be shattered easily, but the aluminum plate in front of him was not slightly deformed until Zhang Heng used it. Most of the force, this bent the aluminum plate into an arc.
Seeing Zhang Heng's movements, everyone's eyes showed disappointment, and some even sighed and began to spread around.
"It doesn't matter, we can continue the experiment." Yan Ronghua shook his head and said blankly.
"Wait." Zhang Heng knew that the other party mistakenly thought that the experiment had failed. He re-rolled the aluminum plate back to the plane, and then said, "Are there any failures? You need to formally test it before you know?"
"Do you still need to test?" Yan Ronghua frowned. "Being able to be bent by Director Zhang indicates that we have failed. Theoretically, the hardness of the high-shift metal is more than several times that of diamonds, and it cannot be distorted by manpower at all. "
"Then why don't you try it?" Zhang Heng returned the aluminum plate to the assistant, and there was no doubt. "I asked you as the director to conduct a process inspection immediately."
Yan Ronghua frowned, but at the thought of the other party curing her daughter, she eventually took the soft path, "OK, listen to you."
Said, Yan Ronghua turned to look at the crowd, "Xiao Liu, Xiao Wang, you brought the metal plate to the experimental isolation room, and we immediately performed the first process inspection."
Soon, this aluminum plate was taken to the isolation room. There were many kinds of testing devices in the isolation room, such as anti-corrosion test device, hardness test device, strength test device, etc. First, the aluminum plate was placed on the hardness tester.
After all, it was the first time that everyone made a high-offset metal. When they saw the test, all the scientists invariably surrounded the isolation room and looked inward across the observation window. I saw that under the operation of an assistant, a continuously rotating The cutting device is turned on, the disc-shaped cutting blade rotates at high speed, and at the same time, the assistant presses the instrument down and cuts directly on the aluminum plate!
Suddenly, a huge noise came, and at the same time a large amount of fire burst on the aluminum plate, sparks splashed!
After about a few seconds of cutting, the assistant raised the cutter again, and then he looked down at the aluminum plate, but the next second, he showed the wrong color.
"How's it going?" Yan Ronghua asked immediately.
"Professor Yan, no scratches were seen on the aluminum plate!" The assistant took the aluminum plate out of the fixture and raised it towards everyone, surprised.
"What?" Yan Ronghua was taken aback. Regardless of the danger, he also ran into the test isolation room, took the aluminum plate from the assistant, and looked up at the light-sure enough, the aluminum plate was still smooth after the high-speed cutting just now Can be learned, there is no trace of being cut!
"What kind of cutterhead do you use?" Yan Ronghua asked quickly.
"It's cr12mov cold-working abrasive steel, which can easily cut general steel." The assistant took off the protective device on his head and said.
"Try using a tungsten-molybdenum-based universal high-speed steel cutter head, and the cutting time has been extended to ten seconds!" Yan Ronghua said seriously.
"Okay." The assistant took the aluminum plate to another cutting machine, and then experimented again, and saw another burst of fire and huge noises constantly coming, but this time the assistant stopped in less than seven seconds.
"Why stopped?" Yan Ronghua frowned.
The assistant suddenly smiled bitterly, "Professor Yan, the knife is ruined ..."
"What!" Now, not only was Yan Ronghua shocked, more scientists rushed into the quarantine room, scrambling to look at the knife plate, everyone was a little shocked.
However, for seven seconds, the blade on the cutter head was directly worn away. Not only that, there were still no scratches on the aluminum plate at this time!
"This ..." Yan Ronghua was also a little confused, and he looked back at Zhang Heng outside the isolation room, as if he was not convinced, "use a diamond cutter! I don't believe it!"
The assistant nodded helplessly and changed a new cutter head again. The blade on this cutter head is inlaid with fine diamonds. Even glass, which is harder than metal, can be easily cut, but when the third cut Afterwards, the crowd immediately gathered up, but they were shocked to find that there was still no trace on the aluminum plate! Not even a little wear and tear!
"hiss!"
Many people took a subconscious breath, and Yan Ronghua looked at it all blankly. He simply said again, "Teach me the strength and toughness of the metal, the plasticity of the metal, and the tensile strength of it all!"
Next, it is naturally a comprehensive test, but with the completion of each test, the eyes of everyone looking at this aluminum plate are more heated and cut. After testing all the properties, everyone looks at this aluminum plate. Completely changed!
"So it is!"
One of the scientists lamented, "Because its neutron content is highly imbalanced, energy transfer is very insensitive, and heat and fluctuations cannot be transferred on the metal, and he has more hardness than diamond and the strength of titanium alloy. It can be described as the world It ’s the strongest metal on earth, no one! "
"It also has excellent corrosion resistance. This is a perfect metal that can completely change the entire human industry!" Another scientist also expressed his opinion.
"But don't forget, it is also very costly, and it is also the most expensive metal in the world!" Said a third scientist.
For a while everyone sighed that an unprecedented metal was in front of them, and they were also involved in the metal manufacturing process. All of them were very satisfied. They knew that they had made history!
However, only Yan Ronghua seemed to think of something. His face changed and he turned to look at Zhang Heng, but only then did he find out that I do n’t know when, Zhang Heng had left ...
He sighed secretly, at this time Yan Ronghua fully understood why Zhang Hengming had bent this metal before, but he still wanted to test it.
It is not the failure of high offset metal production, but the strength of Zhang Heng, which is not comparable to ordinary people!
Thinking of this, Yan Ronghua's eyes flashed a shock and awe, and this shock was buried deep in his heart. (To be continued.) 2k novel reading network