Chapter 48:

I stared at the small piece of special steel made by Rose. Tan Li looked like a rare animal and crooked her head.
She murmured like a little fool: "Student Ross, what good is this special steel besides being hard, abrasion-resistant, pressure-resistant and pressure-resistant!"
"The benefits are many. For example, a knife made of special steel is a real iron-cutting tool, which can easily cut any metal, and cutting steel bars is as easy as cutting fruit. Ah! When it comes to the knife, I suddenly thought that I should give Belgrils has made a special army knife. Sister Li, go and buy me an ordinary army knife. "
丽 Tan Li blinked her eyes and was a little confused: "Don't you say you want to make a knife for Bell? Why did you ask me to buy a knife!"
Rose smiled a bit badly: "As the saying goes: 'Good steel is used on the blade'. As long as I coated the blade, back, and blade with a layer of special steel, I can make the ordinary saber sharp and extremely sharp. It ’s indestructible. If you make a full knife with special steel, it is not cost-effective, and it will increase the weight of the knife too much, and it will be inconvenient to carry. You can buy one for me. "
Tan Li smiled and nodded: "Don't buy it. My dad has been a soldier and has stored a lot of military daggers and sabers. My dad's bedroom is downstairs. I'll just pick one up."
"Well, hurry up."
丽 Tan Li obeyed Rose's order and quickly ran downstairs. After a few minutes, she ran back, and ran back with a Type 65 military dagger in her hand.
Rose took the dagger and played, and threw the dagger to Tan Li.
Rose picked up the special steel sheet, walked to the high-temperature furnace, and threw the steel into it. The only disadvantage of this special steel sheet may be that the degree of high temperature resistance is not increased much, and the melting point of ordinary steel is 1400 degrees to Around 1600 degrees, the special steel manufactured by Ross has a melting point of about 2200 degrees and will still melt when exposed to high temperatures.
Of course, if Rose wants to make special steel with higher temperature resistance, it is very easy, just add other alloys.
Start the high-temperature electric furnace and raise the temperature to about 3000 degrees. Rose slowly waits for the special steel to melt.
About seven minutes or so, the temperature of the high-temperature electric furnace rose to 3000 degrees, and the special steel sheet the size of the basin was melted into a liquid again.
打开 Gently opened the valve of the electric furnace, and the molten special steel turned into reddish hot metal, and Rose couldn't wait to take the dagger in Tan Li's hand.
As if soaked in soy sauce, Rose took a steel brush, dipped the molten steel, and brushed it on the blade, back and blade of the saber.
I was busy for about three minutes. After carefully brushing the entire knife with a thin layer of special molten steel, General Ross dropped it into cold water, and the smoke rose. After a while, the molten steel cooled and solidified, and Rose picked up the knife.
加入 After adding this special knife to the special steel, the weight doubled, and the blade exuded a faint blue light.
"Pei Ye's saber has been successfully manufactured, sister Li, let me see the sharpness of this saber."
Rose was pleased that the general knife was thrown like a dart, and was thrown on the concrete floor in the research room.
With a bang, a sharp special army knife was inserted on the concrete ground. Except for the knife handle, the blade body fell into the concrete ground as a whole.
"Ah! This knife is so fast. The cement in front of it is as crisp as tofu." Tan Li was shocked.
"What is it, Sister Li, take this knife and cut something else."
"Well, let me try."
Tan Li pulled up the saber from the ground, took a closer look at the blade, it was intact, there was no gap, and the knife hole on the concrete ground was smooth as a mirror.
罗斯 Encouraged by Rose, Tan Li took the saber and walked to the steel piled in the corner of the research room.
I took a thick steel bar with a broom and Tan Li cut it with a knife.
With a bang, a piece of steel was cut off and fell to the ground, making a crisp sound.
"It's amazing! This knife is really too sharp. When I cut the steel bars, I don't feel that much resistance. It's really as easy as cutting fruit."
Holding a saber, Tan Li was very happy and excited, she cut ten swords in a row.
Yi Zaizai's rebar was easily cut off, the fracture was as smooth as a mirror, and the blade of the saber was still shiny and new, leaving no gaps or curls.
Ross is very proud: "Sister Li, now I know the special strength of my special steel. Haha ... if I brush your BMW case with special molten steel, your BMW will immediately become a bulletproof car. Normal Bullets can't break special steel at all. "
"Magic, it's amazing."
Holding a dagger, Tan Li, who did not like playing with knives, was excited to play.
"Sister Li, you can find a way to send me this Bell. Tell him, if he is willing to help me endorse this product, I will send him 10 such sabers, plus $ 100,000!"
抿 Tan Li pouted and smiled: "Ross, you are so bad! Buy 10 sabers and use a special steel brush to turn them into special sabers. It won't cost you a few dollars. Does this ... really make Bell tempted?"
Rose was confident: "I believe that Pye can't stop this temptation. Don't look at my army knife. It's just a special steel brush. Its hardness, its strength, and its abrasion resistance are difficult in the world. Find the second. Bell will definitely be tempted. "
"Well, I'll find a way to contact Bell later. Ross, you have made special steel. Would you like to call my dad and let him come over and see, he will be crazy."
"That is of course. How to say the research and development funds for this special steel are also provided by Uncle Tan. Of course I have to ask him to take a look. However, I don't want to call Uncle Tan now. I want to surprise him and send him special bearings directly. . "
Tan Li tilted her head and looked at Rose: "You don't want to buy a bearing, just brush it with steel."
当然 "Of course not, how much is the ten million Uncle Tan giving now?"
"It's gone, and I've paid 300,000 myself."
"It's really a good girl. It doesn't matter. From the 60 million RMB that Uncle Tan helped me loan, take out 300,000 and help me buy another 3D printer. I will directly hit 3D printed special bearings."
罗斯 "Ross ... we need a lot of technology to produce bearings. A 3D printer can really print qualified bearings."
Ross made a gesture of contempt for Tan Li: "Huh! With my special steel, is it so difficult to make bearings? Not to mention that I do n’t need a 3D printer. I use a mud to pinch some molds and pour directly into the molten steel to make them. Special bearings. "
Tan Li suddenly thought of something and asked again: "Will bearings made of pure special steel become heavy! Although the hardness of your special steel is 10 to 20 times that of ordinary steel, but The weight has also increased a lot. If the bearings are too heavy, sales will also be affected. "
"This is an increase in density, so the weight has increased. You do n’t have to worry about this issue ~ EbookFREE.me ~ I can control the hardness of the special steel and push the two electromagnetic walls forward by one centimeter, the hardness of the special steel produced reaches Special steel, which is two times the size of ordinary steel, is pushed by two centimeters, and the compressed special steel has a hardness of four times, which is easy to control. Your bearings do not need to be too strong. It is only one or two times that of ordinary steel. The weight does not increase much . Besides, to reduce the weight, use my special steel to make bearings, and the thickness is reduced. Forget it, it is not worth 300,000. I still use mud and lime as a mold, directly use special molten steel, and manually make a special bearing to give Uncle Tan look. "
Tan Li is speechless. Lihua Company produces bearings and requires many machines and many people. It seems that it is a bit unbelievable that the kid, Ross, has made special molten steel and only needs mud molds to produce qualified special steel. But hasn't this guy in front of him been incredible.
[I've been in a bad mood lately. I haven't been very satisfied with the last few chapters. Last night I spent a whole night on a chapter. I can't write a plot.
Hey! The world is too complicated, I am too simple.
I haven't written any books for two years, so I wrote one this year, and I'm still on the street.
Now this book is just a little better, some people laugh at it, some people ridicule behind it. The reader said and scolded.
Some authors, I'm haha! The last book scolded me for hundreds of days and nights and scolded me for two months. The result was that I had been in a bad mood, and the shelves collapsed. This book wanted to hurt me so much. I'm not that stupid. People are doing it, and heaven is watching. As long as I write a book well, there will definitely be readers supporting me. Those little guys, please come and do it casually. Brother has picked it up ~ EbookFREE.me ~ Welcome book readers to read, the latest, fastest and hottest serial works are all in ~ EbookFREE.me ~ Mobile users please go to read.