Vol 9 Chapter 605: New car (1)

Carl Witt left the manor and they were very satisfied with meeting Zhao Hai today. The two conditions proposed by Zhao Hai are not difficult to do. It is because of this that they promised very quickly. They think that what they provided to Zhao Hai, but what they had to provide to Zhao Hai, can be exchanged for everything they want. How can they be unhappy? Because of this, Carl Wei They are very satisfied.
Zhao Hai looked at Carl Witt's appearance. He didn't say anything. Calvert was satisfied with them. He could get everything he wanted, so there would be no problem. As for pressure. The study of cabins, as well as the study of various weapons, are all Zhao Hai’s hobbies, and can also be regarded as a technical accumulation, for him to return to the blood to kill the sect, to study the steam engine to do some technical reserves.
After Carl Witt left, Zhao Hai immediately started his own new research. Although he wants to make steam armor immediately, it is not time. The design of the armor has encountered some difficulties. Zhao Hai must have After a good study, I can improve the steam car, but this is OK. Zhao Hai is going to try it out. So when they left in Calvert, Zhao Hai told them to let them send it as soon as possible. A steam car came over and sent some workers who made steam engines.
Upon hearing this request from Zhao Hai, Carl agreed to it without thinking about it, so after Carl left them for a long time, all the things Zhao Hai wanted were sent, and Zhao Hai had already put the steam car. The drawings were given to the workers, and the workers were first made to use the pressurized cabins on the steam trucks. Of course, they were also allowed to make as much as possible, in the smaller pressurized cabins. The smaller the ballast should be made, the better.
The workers are now very motivated. Here, they eat well, live well, and the wages are still very high. They are involved in such big projects. They are of course very happy, precisely because of this. So, they are all very happy and motivated.
After receiving the drawings from Zhao Hai, they immediately split a few to make a new pressurized cabin. This pressurized cabin is bigger than the previous backpack-type pressurized cabin, and the pressure is greater. It is even more simple to make it, because the pressurized cabin is not difficult to do. On the contrary, it is very difficult to narrow it down.
So when Zhao Hai’s steam trucks and steam-powered workers were sent to the manor, the pressurized cabins for steam cars had already been made. The workers were making shrinking pressurized cabins. They want to shrink the pressurized cabin as much as possible, but in this way, the conduction of steam becomes a problem again. If the back pressure chamber is reduced, there will be less water, and the vaporization array used must be small. The steam coming out will actually become smaller, and the transmission pipeline with steam must also be small. It is very difficult to reduce the pressure of the pressurized chamber without reducing the pressure of the pressurized chamber. .
So they are studying this thing now. Zhao Hai did not say anything about it. This kind of thing must be tested after countless times, so he can’t really make it, so he is not in a hurry now. On the contrary, he is now I turned my attention to the improvement of the steam car.
After the steam car came over, Zhao Hai looked at the steam car and couldn't help but smile. He saw the steam car in the sea boat city, but he did not study it carefully. Now after careful study, he thinks this The steam car is really too ugly. The four wheels are not inflated. It is made of solid rubber and looks very narrow. Although there is a canopy on the car, it is known at a glance that it must sit up inside. No carriage is comfortable, the front of the car is a steam engine. The steam engine is very large. The biggest one is not a pressurized cabin. On the top of the steam engine, there is a very thick pipe. This pipe is specially used for pressure relief. To be honest, when I saw this steam car, Zhao Hai really sank, this thing is really not made by the human system here in the steel industry.
People in the steel industry can make things like steel dolls, make a steam car, but they are so ugly, which really makes him think, but in any case, this thing already exists. What Zhao Hai is doing now is to improve the steam car.
Zhao Haixian asked the workers who followed the steam car to dismantle the steam car, and then began to study the steam car's transmission system, steering system, shifting system, etc. This research found that this steam car It's really simple, the simplest drive system, the simplest steering system, as far as the shifting system is concerned, there is no such thing at all. Zhao Hai really doesn't know what to say.
In the end, he really couldn’t help. He could only get to the building, start drawing drawings, and then put some of the drawings, some of the manor’s methods that could not be made, gave Will, let Will get the city. After the steam car factory went to work, after the system was completed, the car was sent back, and they completed the final assembly and commissioning at the manor.
Of course, Zhao Hai also made some shifting systems according to some systems on the steel couple, as well as simple steering boosters and shock absorbers. They also let Will send all the drawings away. Of course, these drawings are not sent to the steam car manufacturer. Nowadays, the steam car is widely manufactured, and these things cannot be produced. They can only be sent to the machinery factory, and the people in the machinery factory can make these things. Finally, I will transport these things back to the manor for final assembly.
Carl has long since confessed that Zhao Hai must promise him regardless of any requirements, and as much as possible, it is because of this, so Will will send those drawings immediately after getting the drawings. Carl, they, Carl, they found someone to study, and found that there is no research to understand, and finally can only be divided into steam car manufacturers, machinery factories, shipyards and other factories to make things that Zhao Hai requested.
Zhao Hai is here at the manor, leading the steam car workers to improve the steam engine on the steam car. The steam engine consists of two parts. The first part is the pressurized cabin. The steam car is sent. His pressurized cabin is of course an old-fashioned pressurized cabin. It is not only large, but it must be refilled with liquid for a period of time. In fact, it is also very touching.
The other part is the mechanical part. This part is relatively more complicated, but as long as it is understood, it is actually very simple. He just turns the pressure in the pressurized cabin into power and then provides the steam car. It is not difficult to let the steam car run.
However, Zhao Hai is preparing to narrow this part. After all, he uses a new type of pressurized cabin. The pressurized cabin is much smaller than the previous pressurized cabin, but the power is even bigger. Because of this, this is the case. The steam engine must also be improved to make the size of the steam engine smaller.
It is precisely because of these things that I have to study, so Zhao Hai has been very busy for the next few days. During the day, he wants to follow everyone’s thoughts on how to shrink the steam engine and shrink the pressurized cabin. In the evening he will study how to make new steam armor, so he is very busy.
In the past three days, there were several big horses in the city. The big carriages were all covered with tarpaulins and shipped directly to the laboratory behind them. When the tarpaulin was opened, everyone saw it. When I arrived, it was Zhao Hai’s new steam car that was painted on the drawings.
Will immediately arranged for people, and all the things on the carriage were unloaded. Zhao Hai immediately directed the steam car workers and assembled the new steam car. After the whole steam car was assembled, it looked The people who came to this new steam car were all stunned. They had never seen such a beautiful steam car.
The steam car has a length of about six meters and a width of about two meters. It is very long and wide, but it is very beautiful. He is black on all sides and is black on a black steel plate. The paint is very bright. When people stand in front of the car, they can see themselves reflected on the car. The craft is really good.
In front of the car is a large engine box, of course, the engine is not yet placed inside, behind the car box, the car is very spacious, can accommodate six people inside, is sitting in three rows, if squeezed, sit on ten people There is no problem. There is a big trunk behind the car. The design of this car is a bit like a classic car, but it is much bigger than a classic car. It looks very domineering.
The car has four wheels, the wheels are a bit wide, although it is still a solid rubber wheel, but it seems to be more pleasing to the eye, and there are shock absorbers, sitting must be much more comfortable than the original steam car. Although the car is not equipped with a steam engine, the other parts are all installed. It is really beautiful.
And Zhao Hai, they have also improved the steam engine in the past few days. This steam engine is actually modified according to the car designed by Zhao Hai, so Zhao Hai directly let the workers, lift the steam engine out, and then install When I got to the car, finally, under the efforts of everyone, the steam engine was put into the car, and it was connected with the transport device in the car. Everything is ready. The next step is to try it and see this. A new steam car is not easy to use.
However, before the test, Zhao Hai also carried out the last inspection. After ensuring that there was no problem in all places, he sat in the car. There was also a steering wheel in the car. There were also gears and brakes, but there was no throttle. Because the pressure in this pressurized cabin is not adjustable, the power of this car is always the same. At this point, Zhao Hai has not had time to improve, so this car wants to shift gears, it can only make gears. It is.
Next to the steering wheel of this car, there is a t-shaped handle. This thing is actually the key to the car. Pushing the handle forward and then turning it a few times, the pressurized cabin is officially started. So, after waiting for two minutes, the pressure in the pressurized cabin is enough, the car can go, there is no way to design this. After all, the steel industry here is the steaming machine, not the engine.