Chapter 305: Production line arrangement

After upgrading the power armor, Chen Xin and Qin Lan rushed back to the city again.
Originally, the two brothers Han Ping and Han Ze wanted to follow Chen Xin together. Han Ping was Chen Xin’s bodyguard. There was no reason not to follow Chen Xin, and Han Ze was called by Han Ping to help Chen Xin work. .
However, Chen Xin rejected the proposal of the two brothers and kept them in their refuge. The reason was very good.
"My parents and my two friends live here, they need someone to protect them, Han Ping, since you are my bodyguard, then protect my family. If I have this power armor, no one will hurt me. "Chen Xin said to Han Ping who wanted to go to the city with him.
Faced with Chen Xin's sufficient reasons, Han Ping could only stay in the refuge, responsible for protecting Chen Xin's parents and sister Mo Qingyan.
Chen Xin and Qin Lan went through the snowstorm again and returned to the city.
But this time they did not go to the municipal police station or the Polytechnic Institute, but went to a small refuge that was divided by the municipal government as a production line for isotopic thermoelectric batteries.
The city government has apparently sent someone to clean up here, even though the small refuge has a heating boiler in the low temperature environment of minus 70 degrees, it is cold and shivering, and even the water is poured into ice.
However, with the mobilization of the city government, and the situation in various shelters nowadays has improved slightly, there are still enough people to clean up here, and began to tear down some partition walls in accordance with Chen Xin's previous requirements.
These partition walls are all partition walls installed before the disaster in order to divide the internal space of the shelter. Some of them are just ordinary lightweight partition walls, which can be easily removed by removing the fixing buckle, but some are useful. This part of the supporting brick wall is difficult to remove.
Even under normal circumstances, it takes a lot of effort to tear down a brick wall, but now the low temperature is tens of degrees below zero, even the soil can be frozen harder than granite, and a hammer will only leave it. The next white seal, under such circumstances, wanting to tear down a brick wall built with cement and bricks is not something that a sledgehammer can handle.
After arriving here wearing power armor, Chen Xin also tried to demolish a brick wall with power armor. As a result, a punch with power armor can produce more than 1.25 tons of force. When it hits the brick wall, it just opened a hole. That's it.
And this also caused a slight deformation of the mechanical structure of the power armor. Obviously, this hitting hard object with the greatest force still damages the mechanical structure of the power armor.
However, this is obviously not the correct usage of power armor. Although it is possible to do so, it is just like any brainy person would choose to hit a wall with a hammer instead of using his hand. Power armor can break the wall with a fist, but there is no failure. necessary.
Activating the mechanical arm on the back, Chen Xin manipulated the steel hand to switch to the appropriate tool, and then followed the place where he had just smashed the punch, and easily enlarged the big gap in his fist, and the more The bigger the demolition, a big hole one person high will soon be demolished.
This efficiency is undoubtedly amazing, but it is what power armor should play.
Qin Lan asked the worker to borrow a hammer, held it with one hand, and swiped it directly on the wall. After a few rounds, he successfully smashed another wall into a depression, and kicked it up and made a big hole. .
This kind of efficient wall demolition is of course faster than the workers themselves hit the wall with a hammer. In fact, even if the brick wall is half demolished by Chen Xin and Qin Lan, the workers are struggling to dismantle it. It usually takes a long time to dismantle. After dropping so few bricks, the progress was quite slow.
But even so, Chen Xin and Qin Lan did not use power armor to help demolish the wall, but found the construction leader and the other party to confirm the structure of the shelter.
Although it has been confirmed as a production line for isotopic temperature difference batteries, the specific construction drawings of the production line have not yet been released, because the drawings themselves need to be modified according to the structure of the site, although under normal circumstances the plant is built according to equipment requirements, but there are also The equipment needs to be installed according to the site.
So this is not a weird thing, not to mention that although the venue and everything have been prepared almost, in fact, because there is no precedent to refer to, the production line is just a concept in Chen Xin's mind, and it has not been turned into a finished product.
Of course, this is not a problem at all for Chen Xin, and it is enough to use the system's upgrade function to upgrade the production line.
According to Chen Xin's vision, the entire production line should include several aspects such as raw material processing, metal parts casting, radioactive charging processing, and high-precision parts production, and finally converge on the final assembly line.
Among the more difficult to arrange are the two parts of metal parts casting and radioactive charging processing.
The casting of metal parts is mainly used for radiation isolation inside the battery to ensure that the radiation released by the radioactive isotope inside the battery will not leak. Therefore, this part will use lead alloy as the material for high-precision integral casting.
The most critical problem for cast parts is that a high-temperature furnace is needed to melt the material to a meltable state.
Of course, it is not impossible to use stamping and forming methods, but in this environment, hydraulic presses are obviously not suitable. On the contrary, melting furnaces are more suitable.
Fortunately, since the isotope generator has been built, it is enough to cover the electricity demand of the electric heating furnace, and there is no need to worry about energy.
The energy consumption of electric furnaces is easy to solve, but the heat released by this thing when it is working is not so easy to solve. After all, it is in a closed underground. Various problems caused by the use of furnaces need to be considered.
The oxygen consumed when the furnace is working, the high temperature it releases, the precise temperature control environment required for cooling, etc. are not things that can be determined easily. If Chen Xin does not have a system, he needs to arrange these things in detail. The installation of the furnace can only be prepared after the final results are obtained through demonstration and calculation.
As for the processing of radioactive materials, this is better arranged than the furnace. As long as the radiation protection measures are taken, the country can even process and send the radioisotopes as raw materials from other places. Here you only need to be responsible for the filling. .
Although radiation protection is not easy to do, considering that this production line can basically be exposed to radiation in every link except the initial raw material processing, the entire small shelter is the place where full radiation protection is required. This can only be regarded as Hard requirements, on the contrary, no additional calculations and arrangements are needed.