Chapter 283: Long memory

This video from Mulong Technology is not only focused on Germany and Austria, but it has quickly attracted worldwide attention because his content is about the development of milling cutters and the entire process.
Mulong Technology sent a total of two videos, a minimalist version and a normal version. Because the normal version of the video lasts more than three hours, the average netizen can't stand it anymore, so it took another twenty minutes. A minimalist version of the book, but for those who are engaged in scientific research, especially researchers in fields such as materials science, geometry, etc., those three hours of watching and talking with interest are even more endless.
According to the video record, Mulong Technology started to cooperate with an unknown company named Tiangong Yuji more than half a year ago to start the research and development of milling cutters. The reason why it is not well known is that everyone cannot find it on the Internet. As for why Mulong Technology chose such a company to cooperate, it will be mentioned later.
At the time of the cooperation between the two parties, Mulong Technology did not yet have holographic technology. It was mainly based on artificial intelligence plus AR. The main issue was naturally intelligent research and development. Because milling cutters need to do two things well, first, a deep understanding of the corresponding basic disciplines, and second, trial and error again and again, but the key is to be able to gain effective experience from repeated failures to promote success. 's arrival
With the continuous display of videos, you can see that intelligent R & D is solving these two problems. First, Intelligent R & D has a strong learning ability. Through the study of massive related knowledge, the knowledge revealed in the R & D process can be viewed by the audience. See very clearly.
Secondly, in the process of trial and error, the scientific researchers themselves have apparently neglected the data recording and analysis of the data, and the production of such high-end equipment may be that a millimeter error of a certain part will cause full Losing everything is the most difficult point for scientific researchers how to control the huge amount of data and analyze the possible errors, the areas that should be improved, and the information that may be effective.
But on this issue, intelligent R & D provides very obvious help. After each failure, Intelligent R & D will provide a detailed analysis report, and as the number of tests increases, the analysis report provided by Intelligent R & D becomes more and more useful. Reference value.
However, the intelligent R & D in the video has not yet been able to directly give the optimal solution, but he can indeed provide very effective information for scientific researchers. At this time, as long as it cooperates with experienced, capable and decisive scientific researchers, the overall scientific efficiency is inevitable Doing more with less, the fact that the two sides produced rail milling cutters in less than half a year also confirmed this.
Speaking of this, it also mentions why Mulong Technology chose to cooperate with a small, unrecognized enterprise like Tiangong Yugu. After all, there are still some good companies that do milling cutters in Huaxia, such as Zhuzhou Diamond? Jinlu Ah Qianmu Ah Shangong, etc. are more famous than this Tiangongyu.
It turned out that the owner of this heavenly craftsmanship is the kind of person Liu Fan once mentioned. He is a helpless entrepreneur who wants to engage in scientific research but has no money. At first, I brought eight researchers together to start this business. I sold a house and invested three million dollars. But how much money was spent on scientific research? It didn't take long to burn up the money.
There is no way, he can only go out to borrow money to finance, but because the company has no profitability and the financing situation is not ideal, the development speed of Tiangong Yutong is very, very slow. At the most difficult time, they have a successful product a year. Nothing can be done.
However, Guan Jiuliang cannot do this. He is engaged in scientific research and business. He is also unwilling to sell a company to give up research and development, and he is unwilling to work for others. He said that he cannot find a good corporate research and development environment. , I have been struggling to make things, and owed a debt outside. In particular, the disclosure on the rail milling cutter occupied 80% of his capital and energy, because he felt that the national high-speed rail was developing too fast, and this thing would be used to hold his neck sooner or later. The kind of passive result was unthinkable.
Such a person can easily cause people to argue, some people will think he is very persistent, and some people will think he is pedantic and stupid.
There are a thousand Hamlet in a thousand people's hearts. Liu Fan only knows that he saw the shining point on him. His experience and knowledge on rail milling cutters are really rich, and he has his own unique opinions.
Therefore, Liu Fan bought Tiangong Yugu, and Guan Jiuliang was convinced by his exchanges with Liu Fan. He thought that he finally found a scientific research enterprise he recognized, and stayed at Mulong Technology to concentrate on milling cutters. R & D.
Mulong Technology released this paragraph in fact to show their artificial intelligence technology again. How did they find such an unknown company? It relies on a similar approach to finding room inventions, looking for small businesses with good products from many details.
Although Tiangongyu's rail milling cutters have not been researched, they have done very well in other aspects. This attracted the attention of artificial intelligence and fed the news back to the company's scientific research mining team.
From this incident, the audience once again saw the attitude of Mulong Technology to scientific research. Look at the huge companies, aren't they all almost equal giants? The acquisitions are not all well-known in the industry. Is it a new star?
Although with the help of artificial intelligence technology, it is undeniable that Mulong Technology's attitude towards treating and developing this piece is truly extreme.
Of course, this is a vignette. This video is more intuitive and more important. It will allow more scientific researchers to see the actual role of intelligent R & D. Using the record of milling cutter R & D, it will show the powerful development of intelligent R & D very carefully. Come out.
Because it is impossible for Liu Fan to let every scientific researcher stay with Mulong Technology for a few days like Ji Mo. How many scientific researchers around the world come here?
And many people also have hesitation, including the influence of prejudice left over from history, and you let him stay, but he will not leave it, so Liu Fan thought of using this milling cutter incident so that these researchers would take a closer look at intelligent research in the end Niubi not Niubi.
Powerful analytical capabilities, near-real-world interaction, and whimsical ideas not subject to subjective consciousness. Such intelligent R & D, whether you want it or not, will naturally make judgments for scientific researchers with their brains.
While achieving this goal, Liu Fan also gave a hard shot this time, that is, since he wants to show the strength of intelligent R & D, he has to expose a lot of R & D details, so Liu Fan simply exposed this detail More thoroughly, the core information of milling cutter development is in the video!
In other words, Mulong Technology has released the world's top rail milling cutter technology for free! Even some related core technologies are freely available! Also mentioned very deliberately ~ EbookFREE.me ~ related patents of Mulong Technology, free for life!
Who does Mulong Technology suffer from this? Of course, milling cutter companies in Germany and Austria. This is their trump industry. As the world ’s highest level owners, they rely on this technology to make a lot of money every year. But with the exposure of Mulong Technology, their advantages disappeared all at once.
It is no exaggeration to say that Mulong Technology is destroying them, and it is very easy and successful to do so.
This is the counter-attack power of Mulong Technology, and this slap fan completely stunned them.
However, they have no way to take Mulong technology. They openly know that their technology is not their own technology. They cannot sue themselves. Even from the results shown in the video, Mulong technology's milling cutter works better. And as a result he made it public.
At the same time, Liu Fan did not forget to slap them in front of the media. Some media asked Liu Fan, why didn't Mulong Technology have such an advanced milling cutter?
Liu Fan replied, "Because the country has a long-term cooperative relationship with them, we thought about protecting their business and letting our friendly international friends make more money, so we put things first, thinking If everyone cooperates well, we wo n’t take it out, purely as a record, in case they make a wrong decision one day, but what we did n’t expect is that this record is actually used.

In the words of Liu Fan, while beating mill companies in Germany and Austria, he was also reminding other companies not to ban the sale easily. Now it is not a question of whether Huaxia can catch up with you, but in the warehouse of Mulong Technology Don't know what's hidden, don't shame your face!
Some people fully understand why so many people say not to mess with Mulong Technology. This time, they have a long memory ...