Chapter 177: Niucha's system

　　 Donghai City, International Convention and Exhibition Center.
The "International Steel Industry Summit Forum" was held here. The huge lecture hall was full of seats. Wang Xudong, Chen Sanlian and others were sitting here listening to the reports of some big names in the steel industry, analyzing the future development prospects and trends of the steel industry, and analyzing the current situation. The problems faced by the steel industry and so on.
Although relatively boring, after listening to the report, Wang Xudong also knew that, driven by China's strong economic development, at least the next one or two years will be the peak of the development of the entire steel industry. The price of steel and iron ore may be There will be a small increase.
Of course, there is also an analysis by a big coffee who pointed out that the major domestic steel industries have expanded their production scales, and the traditional steel production capacity will gradually appear to be surplus. The emerging special steel industry will be a major development trend. This is in line with Chen Sanlian and Wang Xudong. The inferences of the two are basically the same.
　　 Although Wang Xudong does not engage in steel, a large mine owner is also very concerned about the steel industry. The development of the steel industry is directly related to the demand and price of iron ore.
　　 It is certainly not so easy to enter the new type of special steel industry. It has higher technical requirements, requires a large number of professionals and requires strong technical strength.
　　 Chen Sanlian wanted to develop in this direction, allowing Sanlian Steel to gradually transform and upgrade, but Chen Sanlian also faced huge difficulties, that is, the technical foundation is weak, and it is relatively difficult to produce high-quality special steel to meet market needs.
　　Zheng Xiaotong sat next to Wang Xudong. Although he felt that the report was boring, Zheng Xiaotong was very well-behaved and quiet. It was really boring. Zheng Xiaotong would spend time playing with his mobile phone.
This kind of report lasted for a whole day, and the next day was mainly an exhibition. Many domestic and international powerful steel companies participated in their products. The huge exhibition center exhibits various types of steel products, including the latest ones in the steel industry. Research results, some of the latest special steel, etc.
　　 To tell the truth, Wang Xudong is most interested in tomorrow's exhibition. However, the exhibition will not start until tomorrow. Naturally, I can only sit here today and listen patiently to the "Huashan Lunjian" on stage by the big irons in the steel industry.
　　 Wang Xudong thought in his heart, maybe one day, he is strong enough, and when the World Mining Summit Forum is held, he will be invited to speak as a big man. It is probably a good thing to be able to speak up.
　　 But, Wang Xudong also knows himself that his current scale and strength are far from those of large international mining companies, and the road to development is still relatively long.
On the first day, Wang Xudong patiently listened to the report for a day. Chen Sanlian was more patient than Wang Xudong. Not only did he listen all day, he also took a notebook and recorded a lot of things. Wang Xudong took a look at it and Chen Sanlian took the record. Two to thirty pages.
　　Wang Xudong even admires Chen Sanlian a little bit. At such an age, he is still so dedicated. This is probably one of the reasons why Chen Sanlian was able to start from scratch to establish a steel group of this size. With this spirit, what can't be done.
　　 The next day is the exhibition. Of course, it is also the China Merchants Association. It is estimated that many companies and merchants will sign many contracts. Wang Xudong is also interested in this exhibition.
　　 At nine o'clock in the morning, Wang Xudong took Zheng Xiaotong, together with Chen Sanlian and his son, everyone came to the Convention and Exhibition Center early. When the time was up and the gate opened, everyone entered the exhibition hall with the crowd.
　　 "Brother Dong, it's very lively here, the exhibition hall is so big!"
　　 I was sitting there listening to the report yesterday. I guess it was a bit boring. Today, when I came to the exhibition, everything was much fresher. When I first came in, Zheng Xiaotong shouted in surprise.
It is very lively here. Not only are there more companies participating in the exhibition, but also more people visit. Even a large number of Donghai City citizens came in after hearing the news and came in to see the excitement. As for all kinds of Chinese and foreign reporters, there are a lot of them. To various reporters.
　　 Chen Sanlian also said: "Xudong, this time is an eye-opener, you see, there are actually such alloy steel exhibits."
　　 In front of the booth of a certain foreign steel company, Chen Sanlian stopped, excitedly, and pointed to a certain brand of new alloy structural steel exhibited by this company.
　　 This kind of alloy structural steel is widely used in the manufacture of key structural parts of automobiles, and also used in the manufacture of important structural parts of all mechanical equipment. The market demand is great.
　　 Chen Sanlian was envious, thinking in his heart, it would be great if his own Sanlian Iron and Steel Group could produce this kind of alloy structural steel.
　　 Unfortunately, Chen Sanlian can only think about it this way. Chen Sanlian knows that his own Sanlian Steel Group does not have such strength and can only produce large-scale goods. The focus can only be on traditional steel.
　　Wang Xudong also came up enthusiastically, watching the introduction of this alloy structural steel enthusiastically, and even, Wang Xudong quietly activated the "God-level big mine owner" system.
After the system is upgraded to the fourth level, there are two new functions, one is the "analysis" function, mainly for the analysis of metal materials, such as various steels, various alloys, etc., as long as there is a sample, the metal sample can be Perform analysis to obtain a series of data of the metal, such as composition, strength parameters and so on.
The other is the "generate" function. After the analysis of a certain metal material is completed, if you think that the metal material is OK and you want to smelt, you can use the "generate" function to generate a complete set of smelting and manufacturing of this metal material Craft.
　　 After reading the introduction of this alloy structural steel, not only is it a high-end special steel, it can also be widely used in automobiles, machinery and other fields. Wang Xudong was a little bit moved.
The alloy structural steel exhibited in this booth is spread on the booth with red silk cloth. On the red silk cloth are some samples of this alloy structural steel. There are both bars and several sheets. This is a good chance.
　　Wang Xudong activated the analysis function in the "God-level big mine owner" system and began to analyze this alloy structural steel. Immediately, the analysis progress bar began to appear. About ten seconds later, the voice of Miner One sounded in Wang Xudong's mind.
　　 "Brother Dong, after the analysis, do you use the ‘generate’ function to immediately generate a complete set of smelting processes for this steel?"
　　 can be generated right now, or it can be generated after a period of time to generate a full set of smelting processes. Wang Xudong knew this.
　　 Wang Xudong said to the miner: "The smelting process will not be generated for the time being."
　　 "Yes, Dong Brother."
　　Miner One faithfully executed Wang Xudong's order to temporarily store the analysis data of this metal material, and then recall it when Wang Xudong needed it.
Wang Xudong is more curious. Since the system can generate a complete set of smelting processes for this alloy structural steel, is the set of processes generated by the system the same as the original smelting process of this steel plant? If the processes are different, then who is the best and the inferior? .
　　 This needs to be understood. Wang Xudong asked Miner One. This time, Miner One answered clearly and with a proud tone.
Miner No. 1: "Brother Dong, don’t worry, if you use the'generate' function, the whole set of smelting processes generated will definitely be better than the original set of smelting processes of this steel company. This set of smelting process for smelting this alloy structural steel will produce a very high-quality product whose quality is even better than the current samples of this alloy structural steel."
the student surpasses the master.
　　 is even better than the sample on display~EbookFREE.me~ Suddenly, Wang Xudong was very happy and said in his heart, it is indeed a powerful system, it is so awesome.
That being the case, it’s even less rush to generate a smelting process, because the number of generations is limited, and the number of times to use the "analysis" function can be relatively higher. At present, the system can be used for a total of ten times under the condition of four levels, and "generation" The function can only be used twice.
　　Wang Xudong intends to analyze more of the metal materials in the comparison, and then choose two complete smelting processes to produce these two metal materials.
　　 With the full set of smelting processes generated by the system, Wang Xudong is confident that he can smelt very high-quality metal materials, such as the alloy structural steel just now.
　　 The quality of steel of the same brand is also different. Generally speaking, domestic materials are worse than imported materials. For example, for a certain brand of bearing steel material, domestic materials are only a quarter of the life of imported materials. Quality defects such as uneven hardness of steel, large fluctuations in the control of carbon and oxygen content in steel, loose center and enriched inclusions are common among domestic steels.
　　 This is also the reason why Wang Xudong is so happy when he heard that the process generated by the system is better than the original process. The quality of imported metal materials is so good, not to say how advanced foreign smelting equipment is. The biggest difference lies in the process.
　　 If the smelting process is good, the quality of the smelted steel is naturally good, but the smelting process is unreasonable and lacks in some aspects, and the quality of the smelted steel is relatively poor.
　　 The system is so awesome, Wang Xudong thought in his heart, that opportunity should not be wasted. You have to walk around, and you must analyze it when you see the special steel materials that are relatively good.
　　…………
　　I will consider putting it on the shelves in another week, so that everyone can watch more free chapters and accumulate more collections gradually.