Vol 2 Chapter 1212: The company's second-generation spacecraft has a...
-
I Have a Little Black Hole
- Stealth Scorpion
- 1194 characters
- 2021-03-03 01:35:15
Seeing that other people were looking at him curiously, He Chengxin didn’t sell the door, so he immediately began to talk about the problems he encountered:
It’s such a boss. Our preliminary design plan found in the simulation calculation of Origin. The overall structural strength will have various problems when encountering extreme conditions.
Generally speaking, the structural strength is not enough. After investigating the reason, we found that this problem is not a problem with our design itself, but a problem with the relevant data used for the material performance of the main structure when we input the main structure parameters of the spacecraft.
The source of the data we input is the main structural component data we forged with the company’s existing 500,000-ton die forging hydraulic press. However, the strength of the component forged by the 500,000-ton die forging hydraulic press is obviously not enough for our second Generation spacecraft design requirements.
So after recalculating, we found that if we want to solve this problem, we must use a more pressure die forging hydraulic press to forge the relevant main structural components, so that we can solve the related problems once and for all.
This is the question I want to talk about today. We are still in the preliminary design, so we don't need a higher pressure die forging hydraulic press for the time being, but we must have it when we really need to conduct physical tests.
I would like to ask when the company can start manufacturing millions of tons of die forging hydraulic presses here? If this basic condition is not resolved, things will definitely be delayed! "
"Is the pressure of the 500,000-ton die forging hydraulic press not enough? The upgrade speed requirement is too fast! You must know that even the company’s 500,000-ton die forging hydraulic press was only put into use last year. Well, it hasn't been for a year now, and now you are all starting to demand megatons?
The overall cost of that big guy is more than 30 billion yuan, which is three times more than the manufacturing cost of the previous 250,000-ton die forging hydraulic press! Is it necessary to invest in the construction of a million-ton-level die forging hydraulic press in such a short time? "Kong Yu laughed in surprise.
"Then I'm not asking for it. This is the result of the simulation calculation of Origin. I will let the origin projection show you!" He Chengxin said that he called up the simulation results of the second-generation spacecraft and let the origin enlarge the projection. come out.
"Wow! The spaceship you designed this time is really cool!" Jiang Yuting couldn't help but smile and praise after seeing the projected rendering of the spacecraft.
"Yes, yes, yes! I also think that this design is a spacecraft. The two spacecrafts of our company are just like the enlarged version of the aircraft. They look really domineering, but they look like the universe we imagined. The spacecraft has a big drop.
This time, the second-generation spacecraft designed by Mr. He is the kind of spacecraft that can fly through the universe in our imagination! "Zhang Lichun, the manager of the propaganda department, also looked at the spacecraft's projection.
The other female senior executives in the conference room also nodded in agreement with the two of them. Let alone the performance of the spacecraft, they liked it very much because of the appearance!
Compared to performance or something, their first impression is whether they look good or not. Only when they look good first will they care about the remaining issues.
Although the company’s two existing spacecraft have made great contributions to the company’s space strategy so far, it’s really hard to say what looks like, at best, it can only be described by adjectives such as domineering and mighty. Unless they speak out of conscience, the women in the company really have nothing to say.
Now that the spacecraft laboratory has evolved to such a satisfactory level in the design of the second-generation spacecraft, they are of course very surprised.
"Please, everyone! Let's discuss the design of this spacecraft. Okay, is it important to look good? Do you think we don’t want to design the "Chuxin" and "Sunshine" to look better and more sci-fi? We have that technology!
All technologies of the first-generation spacecraft were explored from scratch, and the level of technology that could be used was only that, and there was no way to design it well. In addition, in order to be safe, of course we will not design the spacecraft with weird shapes.
Now that we have accumulated a lot of experience, and the relevant technical level has also improved, so of course we can design the spacecraft more rationally.
But we are still encountering a problem now, everyone will focus on whether we can make it, OK? Otherwise, even if this design is sci-fi, what good is it? "He Chengxin, seeing these people, stared at the shape of the spacecraft, and then reminded him helplessly.
"Okay! Then you answer the question of Manager Kong! Give us a specific introduction to the forging of the main structure of the spacecraft." Jiang Yuting shook her head and smiled ~EbookFREE.me~Good president! It stands to reason that the 500,000-ton hydraulic die forging press that the company completed last year has been leading the world for at least 30 years. According to the scientific research and development speed of other countries and companies, this level of die forging hydraulic press is indeed sufficient for a long time. Up.
But this problem is obviously incomparable with the speed of our company’s scientific and technological research and development. Even after calculating the results in our laboratory, we can’t believe it. I didn’t expect that our design would require hundreds of A 10,000-ton hydraulic die forging press!
For other components of the spacecraft, the 500,000-ton die forging hydraulic press is enough, but the main structure is obviously no way. If the strength of the forging is not enough, the overall performance of the spacecraft will definitely be a big problem. .
Nothing is said about performance degradation. If it is forcibly manufactured, there will be very serious safety hazards. It is very likely that the safety of astronauts will be endangered in extreme situations in space.
So if we want to solve these problems, then we must use a million-ton hydraulic die forging press. This is the basic problem we are encountering now!
Even I know that building this kind of big guy will cost more money, but isn't this developed to this point? This is also the actual demand of the company, and it won't work if you don't want to build it. "
He Chengcheng explained to everyone that the company executives in the conference room combined with the simulated test screen projected by Origin also understood that this problem is indeed to be solved.
Anyone with a bit of common sense knows the importance of the strength of the main structure of the spacecraft, not to mention that, as a senior company dedicated to the development of the space field, if they don’t even understand this basic thing, they will not be able to achieve this position. of.
(https://)
Please remember the domain name of this book's first publication:. Mobile version reading URL: