Chapter 718: Leap forward

Fujita Takashi stayed in Hanzhong until June, after finishing two mbp-110s, he was asked to join the construction of the Hanzhong branch of the "Holy Light Aerospace Complex" as a special consultant.
Fujita has no autonomy for this errand, because his friends in Tokyo advised him not to return home recently, because the Tokyo Metropolitan Inspection and Special Search Department listed him as an important suspect-he will definitely be arrested when he returns.
Knowing the situation, Fujita vomited three liters of blood, almost angered to hang. He didn't understand how he was so unlucky? Apparently a Showa Zhishi, he was categorically classified as a treason.
This is really wrong!
Zhou Qingfeng's "Commonwealth" was recently approved by the imperial capital, and five major projects were divided into five different places, making full use of existing resources to avoid duplication of construction.
The large aircraft project settled in Shanfei of Hanzhong.
Before Shaanxi Fei, it was a medium-sized "Yunba". Its technical ability was quite poor, and its output was particularly pitiful. However, Shaanfei’s plant was particularly large, and it was claimed to be the number one in Asia.
The union of the "Commonwealth" is to use enough foreign currency as a lubricant to integrate the scattered scientific research and manufacturing systems in China.
‘Holy Light’ is unintentionally and impossible to rebuild a new system, it is necessary to borrow the original industrial and mining enterprises. Simply put, it’s called ‘take its essence and remove its dross’.
At Da Mao's house, "Holy Light" purchased four Tu-154s of Gubyshev Aircraft Manufacturing Plant last year, and successfully used the power of Minister Chuikov to request the purchase of aircraft overhaul lines and even manufacturing plants.
After the disintegration of the alliance, the political system of the Da Mao family collapsed directly, and the economy collapsed after April 1992. No one came to organize production again, and the original ‘cooperation’ soon became ‘moving’.
Since May, dozens of Il-76s have been taking off and landing at Hanzhong Airport. A large number of Maozi engineering staff arrived at Hanzhong from Kuibyshev and made contact with Shaanxi and Fei.
Zhou Qingfeng was not afraid of leaks at all, and technicians from Japan also participated in the planning and construction of the new production line. ‘Do not doubt people, don’t use suspects’, and people with real problems can’t escape his ‘recognition lies’.
Fujita Takaji is from the Toshiba Machine Tool Division, but it does not mean that he only understands machine tools. This old devil has worked in the production line and office for twenty or thirty years, and his technology and experience are extremely rich.
The initial personnel of the large aircraft project is more than 2,000, and they are all hired from domestic and abroad with high salaries. Fujita was asked to consider the feasibility of manufacturing and the problems he will face from a Western perspective.
The feasibility criterion is very simple-mil-std.
Fujita jumped when he saw this standard, because mil-std was translated into Chinese and it was called ‘U.S. Commonly Used Military Standard’.
Tiankeng!
Planting flowers to move the standard of their enemy to do feasibility analysis.
This set of standards covers all aspects of military equipment and is the culmination of the current US industrial system. For example, the mil-std-1534-1972, which is the technical requirements for the design of aviation turbine gas engines.
At the current domestic level in terms of materials, processes, technology, etc., the application of this set of standards is too forward. But Zhou Qingfeng still asked it to prevail-the defective short board was listed and tried to fill it up.
Regardless of whether you spend money on research and development yourself, you can ‘introduce’ from the Da Mao family, or smuggle from the West. In short, the standard cannot be low, and you can find a solution.
If there is really no way to solve it, then hand over the problem to the president's lord-President Zhou himself, there will always be a way.
China is really looking forward to this. If we can really use the US military standards without compromising, does it mean that the industrial capabilities of flower growers should be equal to that of the US?
God!
Dare not to think.
The research team of more than two thousand people has different origins and backgrounds. The first thing is to study the extremely rich mil-std technical standards.
This work went super smoothly.
Everyone drinks the health water provided by the headquarters of the "Holy Light" every day, and sometimes dreams of scientific dreams that collide with each other at night, as if they have mastered the ability to remember, and read the content they need to master in half a month.
The master plan is thus launched.
Fujita found that this was an excellent opportunity to find out the industrial capabilities of the flower growers, because the technologies that could not be achieved in China would inevitably be caught and discussed. As long as it is discussed, the relevant data cannot be concealed.
For example, the performance of domestic aluminum alloy materials is not as good as that of the United States. To manufacture a light and strong body, the production and processing of high-grade aluminum alloys are necessary. This is reflected in the Yun 10 project.
"Your aluminum alloy only meets the lc4 standard. It has poor toughness and is sensitive to notches. There is no way to use the "US military standard"." At an internal meeting, Fujita deliberately picked this out to find fault.
The ministries who can preside over the meeting replied: "We are now able to produce aluminum alloy of lc7 standard to meet the application of large aircraft."
Right, this is different from Fujita's memory. He asked strangely: "When did you master the production and processing capabilities of high-grade aluminum alloys?"
"We are working with McDonnell Douglas McDonnell Douglas to produce McDonnell Douglas 82 passenger aircraft. Through the introduction of technology, Americans have helped us improve our capabilities. Don't worry, the aluminum alloy is no problem."
Nani? American!
Fujita was heart-burning and scratched his lungs, and he could not swear in the sky-it was evil rice beast, no morality, no rules, only recognition of interests.
Toshiba exported two machine tools, but did not make much money. However, Rice Livestock fined a large sum of money, forcing Toshiba's top management to resign, and also issued humiliating ‘blame ads’ in more than 50 US newspapers.
But Miyu itself actively exports sensitive aluminum alloy manufacturing technology. This gadget can be used on a passenger plane or a bomber!
Every weight reduction of the bomber means an increase in ammunition capacity and range.
"Well, since the aluminum alloy material is solved, what about the processing capacity? The large frame of the machine body needs a large die forging press."
According to Fujita's understanding, the die-forging press of the flower planter currently has only 30,000 tons of processing capacity, and the minimum requirement for the machined body is 40,000 tons.
And there are only a handful of countries in the world that can produce heavy die forging presses. There are only three countries: Russia, the United States, and France. Not even Japan, it needs to be imported from abroad.
"Oh, this is not a problem. ‘Holy Light’ has completed the full acquisition of the Gubyshev Aluminum Plant and began to relocate it this month.
All equipment will be transferred to the 112 plant of the Ministry of Metallurgy, which is the Southwest Aluminum Plant. This includes a 75,000-ton die forging press. This 10,000-ton equipment will be preferentially relocated and reinstalled.
The entire relocation and reconstruction work is estimated to be completed within two years, when our high-end aluminum alloy production capacity will not worry.
By the way, the Upper Zalda Titanium Plant has the same "King of Forging", and "Holy Light" has also acquired that plant. Our titanium alloy processing capacity will also make leaps and bounds in two years.
Everyone knows that the performance of titanium alloy is good, but the processing of titanium is a difficult point. In order to process titanium alloys, the Alliance has specially manufactured closed argon-filled processing chambers.
This special equipment is expensive and has limited uses. It can't be done casually. But now it’s ok, we just move the ready-made back.
We will also manufacture a batch of new 10,000-ton die forging presses for the manufacture of high-horsepower diesel engine crankshafts and other workpieces. The group is developing a'two-year plan' that requires hundreds of manufacturing projects to be completed within two years. "
The personnel of the ministries and commissions made a briefing. These are public information. Americans also know that they want to intervene, but they cannot interfere. A cheerful laughter sounded in the meeting room for this exchange.
The flower planter will have super die forging equipment 20 years in advance, and ‘Holy Light’ also intends to complete a leap-forward technical upgrade in two years.
Fujita's heart is like crumbling it.