Chapter 1520: Smelting research

For Morin, the pressure on him in the smelting department is very great. Because if he made more than twenty first-level metal ingots, then he would have to downgrade.
Therefore, at this time, Mo Lin must quickly upgrade himself on the smelted ore.
For ordinary people, it is impossible to improve in a short time. The kind of technology that ordinary people need to have years of hard work can have.
However, Mo Lin does not need to be so, if not, he can not afford the existence of legend in this world.
Moline's method is to use arcane power to detect what kind of changes will occur in the flames. After understanding the changes in general, Moline is really doing corresponding things for this.
Morin put the first piece of ore into the furnace. This time, the iron ore they obtained required them to smelt steel ingots.
Because of the need to smelt steel ingots, coal needs to be used as a dye. Morinco doesn't know what the truth is.
In fact, according to the science and technology on our earth, the so-called difference between steel and iron is the difference in carbon content. Among them, the higher the amount of carbon, the smelted iron will strengthen the hardness and weaken the toughness, and vice versa.
Of course, there will be such an understanding, only because the human beings on our planet have already recognized the microscopic particles, but the Azenos continent has not yet realized this.
After all, there is a world dominated by elemental magic. Many things can be solved with magic, which dilutes the progress of natural science research.
For example, although Mo Lin does not know what is an element and which is an atom, Mo Lin has discovered the change of ore under the flame under the detection of the slight arcane power secretly cast.
Morin naturally has no problem in grasping the flame temperature. Now, it is the most suitable temperature for smelting iron ore. And Mo Lin detected with the power of Arcane, and found that in the flame, you can clearly feel that some microscopic particles are entering the iron ore.
The iron ore is also quenched by the flame, continuously removing impurities and then blending into the particles in the flame. Those particles move among the smelted iron and form a relationship with them that Moline cannot explain clearly.
However, if you ask me to explain the relationship, it is also to catch the duck (this is just a metaphor, not to say, I am the duck.) put on the shelf, because this is not my expertise.
We can only abandon such extremely professional "sexual" things, vaguely speaking, Morin felt that under the interaction of flames, ores, microscopic particles, etc., he seemed to have grasped a certain law.
Morin constantly felt those changes, and then strengthened his familiarity with the law.
In the end, Morin finally determined that when iron ore was incorporated into a certain amount of particles, the steel smelting could be completed. The quality of the steel ingot is determined by the particle content.
Moline first got a steel ingot, which was obviously a first-level steel ingot, and at the same time, Moline also borrowed a second-level steel ingot from another black iron dwarf.
Through the detection of two types of steel ingots, Morin found that the first-grade steel ingots he melted had fewer particles than others' second-grade steel ingots.
Morin did not continue to smelt steel ingots, but communicated with the Dark Iron Dwarf who had a good impression of himself. In fact, it was not an exchange, but Morin said that he wanted to compare the difference between his smelting steel ingots and them.
auzw.com This, other black iron dwarves are unlikely to be rejected by everyone, and Mo Lin looked at the content of the particles in the secondary steel ingot one by one.
Some people would say, if this is the case, why didn't Moline detect such particles in the first place? In fact, this is really a simple thing, because he does not understand this kind of particles.
That is to say, in a completed steel ingot, which kind of composition is intrinsic and which is foreign, Mo Lin can not distinguish.
There must be a smelting process before he can know that those things are involved later.
Putting it aside, after Mo Lin detected dozens of second-class steel ingots, he found a range of particle content in those steel ingots. This range is very small, so small that they have no corresponding unit to define it.
After grasping this range, Morin began to study the third-grade steel ingots and found that the particles contained in the third-grade steel ingots were smaller than those of the second-grade ones.
The particles contained in the third-grade steel ingot are exactly between the first-grade steel ingot and the second-grade steel ingot.
It was also a community, and then, Mo Lin studied the inside of the super steel ingot. In this process, a small "insertion" song also happened, because the super-grade steel ingot is really rare, but people are not very willing to lend to Morin.
It's not afraid that Moline robbed him, because once such a thing happened, Moline would be severely punished. But it was like a person who had just bought a car that was expensive for him, and then his friend wanted to borrow it to drive a lap.
This is just the "sex" quality of play, but this person's heart is still awkward.
The Dark Iron Dwarf naturally had this kind of thought, but, fortunately, Morin still borrowed it.
Through another exploration, Morin discovered that the particles contained in it were the very minute points connecting the second and third levels. That little detail is almost a bit.
Therefore, as a master-level blacksmith, smelting a second-grade steel ingot will basically have a probability of more than 90%. And the smelting of three grades of steel ingot will immediately drop to about 30% probability.
When it comes to super-grade steel ingots, the probability is only a faint one to five percent.
It can be said that such a probability is almost a matter of luck.
Morin had a general understanding of this situation, making it a better understanding of smelting ore skills. In fact, to put it bluntly, smelting ore is how to get rid of impurities as much as possible, and then mix in the appropriate amount of other substances.
The truth is simple, but the world is so magical. The simpler the truth, the harder it is to put it into practice when acting.
And those who can apply these simple principles to skillful people have great wisdom and energy, and ordinary ordinary people cannot do it.
Fortunately, Mo Lin is in line with the former at this time, so after grasping these principles and laws, after Mo Lin brewed for a while, he felt that he should be able to do it.
So, Mo Lin began to re-melt the steel ingot.
Constantly feeling the changes in the ore in the furnace fire, feeling the content of the particles in it, Moline's second steel ingot was finally released.