Vol 8 Chapter 681:

"Hello!" Three beeps, the knocking of the door sounded in the conference room, and then the door came in and Sifan and his secretary came in. After the two of them came in, they went directly to the seat where the master sat, and then sat down.
"Hello, I'm Si Fan, and I think today's meeting can begin." Si Fan reached out and asked them to speak.
Professor Carlin has long been ready.
"Dear Mr. Si Fan, the purpose of our coming today is presumably clear to you. We are going to complete the manufacture of new CNC machining centers. We need particularly high-performance parts and processing technology in terms of specific parts. We hope to seek cooperation. Mr. Fan's factory makes the metal or parts we need. "Professor Carlin finished and started to push the switch.
A presentation of PPT is displayed on this computer screen. In front of him is a very high-tech machine tool. The first one to appear is him, which is about five or six meters tall and can process large workpieces.
"Our design is a universal machine tool. He can clamp large workpieces and small parts. At the beginning of the design, it was aimed at the world's manufacturing and mother machine factories."
In Carlin's introduction, Si Fan gradually learned about this super large machining center.
Just for something inside them, they still looked straight frowning.
"It seems that all the cores of the machining center are extended around this cardan shaft system, but other aspects do not seem to be much different from ordinary machining centers, right?" Si Fan said.
This is very important. At the time of processing, the current situation has not changed much, and the efficiency of work is still very low. In the eyes of Si Fan, this is a serious waste of his resources. The top universe metal is used. Does this improve the processing capacity?
The opposite Professor Carlin looked at Si Fan's apparently dissatisfied expression, and he was also frightened. He knew that Si Fan should be able to find a solution here. But obviously Sifan's request does not stop there.
At Si Fan's request, he suddenly thought about the fantasies of some former students and their professors.
It can only be said that they are fantasies, because these things are what they say is funny, they ca n’t be completed.
But Si Fan said now, what should they do?
"In fact, we should be able to complete the overall design, but the requirements for materials and technology are really too high, and we can think about the future." Professor Carin is a very real person, completely realistic. And Si Fan explained.
Looking at the satisfactory PPT on the front of the PPT, ah, at least Si Fan seems to be a satisfactory machine tool, he is more interested in that imagination.
"In fact, the materials we can provide to you are very, very special. If you can meet our requirements, we will provide you with this special metal."
"The number of materials is not very much, it is probably a little more than a hundred tons, and there is really no more. The performance of metal is beyond doubt, you can consider the ideal limit."
"However, the design must meet my requirements, otherwise you can only get the most basic materials provided by Skynet Group, which are the high-quality alloys we have born in the volcano furnace. These alloys should barely meet your requirements and can be used. For manufacturing. "
Some words from Si Fan made these professors' eyes bright. She found that Skynet Group has better things. The best metal is limited in quantity, but it can be designed according to the imaginary limit. .
This is simply their gospel.
What they think about is always to increase the current machine tool equipment according to the current metal performance.
And when Si Fan said it, the innovation in their heads was not enough. At this time, they could only rely on their students.
He remembered that his students had said a lot of unreliable ideas. Of course, that was the design he dreamed about a hundred years later.
He turned to look at his apprentice Carter.
This is a young man. He has deep knowledge but not much experience. He is an impulsive boy who understands nothing, usually dreams, and has ideas.
But his ideas are generally not very reliable.
Now the less reliable ideas come across the less reliable projects. I can only see if I can see those metals.
He believed that if he could see those metals, he would have better ideas.
Carter never expected that he would have a show one day. His uncle stood up, almost subconsciously, as if he was answering a question in class.
"Mr. Si Fan, I once thought that the real CNC machining center should completely subvert the current form, from the clamping process to the real cutting process."
"Our current machine tool clamping uses heavy fixed clamps, and most of them require multiple clamps when cutting, which will cause errors. If a multi-point clamp method is used, then This can be avoided. Or from the beginning, he has been flexibly clamped, after numerous re-clamping. "Carter is introducing his design.
What he envisioned, Si Fan asked the system to help build it.
"You said, I arranged for someone to implement it for you on the computer, and you can fine-tune it." Si Fan said.
At this time, Carter can describe the machine tool in his goal as much as he wants.
The machine tool in his mouth is really different from what these professors say.
In his mind, this machine tool should be a 360-degree clamp with no dead ends. There are clamped parts at each position, just like a planet. The parts are clamped in mid-air, one day orbit and one month orbit. The two rails are one for clamping and one for cutting. They do not interfere with each other. The tools for clamping are small support frames one by one. The new support frame is continuously supported by the cutting process. The support frame is removed ~ EbookFREE.me ~ and the moon rail is even more convenient. It is a continuously rotating cutter that works around the workpiece. No matter what the workpiece is, it can be quickly cut. The tool change system of thousands of tools can make cutting very easy.
This is the CNC machining center he imagined.
Instead of being silly and thick at present, the machine tool is still used to be clamped, after half of the processing and then moved over, and then clamp and cut the other half.
It affects a certain accuracy and makes the work impossible to use many shapes.
The design in his goal must be the best.
Even Si Fan must admire that his idea is really good, as for the system of tool change.
There are now ready to use and can be built at any time, while other parts are simple to say. To match this cutting method, the complexity of the system used, and the solidity of the metal, it is very scary, especially how this cutting tool can use such a small cutter!