Vol 8 Chapter 922:

This building transfer terminator looks very huge when looking at the block, it is more than five meters, and it is also very sturdy. It does not look like a robot, but a huge machine.
In fact, this is also the case. Unlike ordinary robots, this is a construction machinery robot. His construction machinery classification shows what this thing looks like. It is absolutely very rude. He has a huge body and looks at Just like a huge monster, the thick body carries a few tens of tons of weight, hundreds of various construction equipment on the body are exposed at any time, and there are more than a dozen mechanical arms behind it. This is a module that is guaranteed to be removed. It can be stored properly and securely. There are some very small injection holes on the upper mechanical arm. These injection holes will spray out high-plastic plastics. These plastics will slowly cover the entire material surface under the action of the blower in the back. , To form a simple protective film, to ensure that the material will not be damaged by some very easy way to chronic damage.
Afterwards, there was concentrated packing. When they landed, they were stored in very modern anti-collision boxes.
It is worth mentioning that this box is actually a product of a waste treatment plant. Those boxes that are not easy to decompose, or that have little decomposition value but good ductility have been made into this kind of box, which is already available in the world packaging market A place.
The simplest reason is that there is actually a demand for express delivery in developed countries. They like to use express delivery to buy things, but the artificial price makes them unable to stop in the express delivery market, and their express delivery costs are still too expensive.
Another point is the problem of packaging. They use courier packaging a lot like our people. Another result is that there is plastic waste everywhere, and packaging paper is everywhere. The packaging of courier is endless. Processing in this environment is one. problem.
This problem is still valued by citizens with better qualities, and Si Fan solves this problem better. These wrapping papers are endlessly circulated. They are only used as wrapping paper. When you receive the express, the packaging will be Placed in the dedicated Tianwang Group's recycling bin, it will be collected and re-made into wrapping paper, which is reused.
The transformation process is very environmentally friendly. In this regard, Si Fan can be said to have done a good job, and their technology will not be published, but the nearby environmental assessment indicators are fully in line with the requirements, and it can even be said that there is no pollution.
Such things are naturally selected.
And now the Terminator uses this technology, but he uses a relatively rough method, directly using mechanical blowing, and then quickly packs, the speed of packing the items in his hands does not exceed one second, and the centrifugal force brought by the rotation is in others. It seems to damage the items.
In Si Fan's opinion, these are fart, can damage the fart items, they can clean up all the buildings, that is to say not to look at a big piece, in fact, they are cut products of buildings.
The large number of testing equipment in front of the equipment is to ensure the complete non-load-bearing cutting of this building. .
It seems that most of the cutting of the previous equipment is not the load-bearing part of the building, and the real load-bearing part will be divided in a relatively large way to ensure that it can maintain the original and performance when assembled.
The huge machinery in front of Si Fan can guarantee these requirements when designing, but the effect of real actual use, to be honest, Si Fan dare not pack the ticket.
Because this involves a lot of knowledge application, it is necessary for Sifan to find a large number of auxiliary materials, for example, to completely restore the originally separated and cut load-bearing wall to the previous environment.
This is a very difficult requirement. When cutting, it is inevitable that the integrity of the wall will be lost, and even the basic materials will be reduced. Under such a requirement, how does Si Fan solve it?
This may seem difficult, but after receiving this request, Alex held a meeting, and then there was a plan for this big guy. When designing, he promised that as long as it was not a humanoid robot, it was actually It's very easy to make. Their size can be huge and practical, but they can do much without a two-legged simulation robot, and they can't perform some very complicated work.
Therefore, Si Fan ’s request was not optimistic about them, but because Si Fan was the employer, and he promised to use the company ’s technology on this machine, they promised to create this end for Si Fan, which basically looked a bit silly. Of the person.
Looking at the big head, all of them were mechanical arms, and the body was like a cylinder was buckled upside down on the platform below. It was really not beautiful. As for the lower body, it is more common, it is a huge elliptical body, which is full of various materials used. They are packed in hundreds of small boxes, waiting to be used at any time, while the standing materials are relatively large. Small box.
This design is relatively reliable, and then there are a lot of lower limbs like spiders.
Using such a hundred-footed design is basically laziness, giving everything to the computer and the future black technology, they just want to see how powerful the black technology's intelligent program is.
So this full design is full of Alex's dissatisfaction with Si Fan.
Si Fan also knew that these guys were pit-like, so he personally tested them.
However, his detection method is different from others. He is not using those devices to detect. When other people focus on Sifan ’s controller, he has already contacted the system.
"System, evaluate the terminator in front of you, and check whether it is enough to complete the task." Si Fan ordered to go out.
This is the most basic. The development of the Terminator is of great significance to him, and the rewards behind it are the basis of the Terminator. There is no reward for the development of a fart Terminator.
Si Fan still took advantage of this. UU reading www.uukanshu.com is relatively easy to manufacture, and it just needs to be used now.
Of course, there is another important point, that is, the Bionic Terminator is too difficult to know, Si Fan really wants new technology.
Just when he checked, the system immediately answered.
"The current power system of the Terminator is normal, the module attachment system is normal, the energy system is normal, the control system is normal, and the power performance is normal ... The tightness of the high-pressure container is normal."
The final result also made Si Fan happy.
Because he knew that he succeeded.
"All inspection items are normal and meet the most basic standards."
Book guest house reading URL:

Please remember the first domain name of this book :. Mobile version reading URL: