Chapter 93: Tucao

Lu Zhiming pointed out the direction of the toilet without words, and then walked into the workplace to see the finished products made by Guo Tailai.
With him an idea, and the middle-aged, the two entered the workplace one after the other, and then squatted at the same time. Guo Tai is finished, where is the thing?
There is no table on the workbench, there is no table on the side, and the ground is clean and clean. It doesn't seem to be there. Where is that thing? "
Sure enough, it is a mystery! "The middle-aged man sneered and sneered: "Going to the bathroom?" Run it! "road
Zhiming suddenly moved in the heart and raised his hand to get the thin copper rod that Guo Tailai handed back to him. At the end of the copper rod, there is a finely crafted gyroscope, but at the bottom of the gyroscope, there is still a trace of metal that is not cut off, and is connected with the copper rod. Obviously this indicates that this is made from the copper rod. Instead of coming in from outside. This
There are only a few fitter tools in the workshop, and there are no welding tools, so this scenario can only be the case. in
When the old man’s words were just finished, he had not waited for him to sneer and confront Zhao Xiangbei. He saw the gyroscope, and the kind of contempt on his face disappeared instantly, and his eyes suddenly appeared incredulous.
"He...how did he do it?" Not being shocked by the middle-aged, the best master of the craft he knows, wants to make such a small gyroscope, every spare part must be carefully polished, one careless There will be waste, and sometimes even if it is not stable, it will be scrapped. It is simply maddening. can
Little fat man obviously made all the spare parts once and assembled, is he a monster? What is even more incredible is that he does not need to adjust the processing angle when he processes it. How is it possible to process it on a copper rod? in
The young people just think that time is incredible, but Lu Zhiming is knowledgeable. Guo Tailai's gyroscope, the processing precision he does not need to look at is much higher than the masters here, the surface roughness is directly mirror level, the assembly is also extremely accurate, just look at the appearance, it has already put the table outside There are more than a dozen gyroscopes on the top that don't know where to go.
Lu Zhiming walked out silently, and the thin copper rod on his hand was so lifted. He walked to Zhao Xiangbei, and after Zhao Xiangbei looked at it, it turned to the masters.
Can't help but say that the base of the gyroscope is fixed on the thin copper rod. This is simply a pen of God. You don't need to say anything more than Guo Tailai. Everyone understands that it is absolutely impossible for those who said before to order from abroad. Come in. What is said to sell the country to the enemy is simply a joke. s
Vision, those masters can be much stronger than those who manage and manage. Just a glance, several masters sigh. Big
The skill of the division, they lost their convictions. Not convinced! Everyone, one hour, make a complete gyroscope, and the material loss of the thin copper rod is almost no waste. That is to say, the parts produced by others have a yield of 100%. How is this compared?
At this moment, several masters suddenly felt so tired, hard work for a lifetime, actually not as good as a hairy boy. It seems that the waves of the Yangtze River are pushing forward, and a generation of newcomers are replacing old people. The unit bought high-precision CNC, and also recruited many college students. These people are really old, and they should be eliminated!
"No!" The middle-aged man who was shocked at the workplace suddenly rushed out and shouted at the crowd: "Don't you say that he can make the smallest gyroscope? Why is he doing it with us?" size?"
The teachers who are dying are also a glimpse. Even Zhao Xiangbei is stunned. Yeah, isn’t Guo Tailai always able to make the smallest gyroscope? Why didn't you do it? Is it really impossible? "
Lu Ge, turned the copper rod over. Not far away, Guo Tailai had already finished the toilet, and exaggeratedly rubbed the hand that had just been washed, and casually said to Lu Zhiming.
Lu Zhiming did not say anything, turned the other end of the copper rod up. This time, even the guy who knows that Guo Tailai is very powerful is also stunned. copper
The head of the stick, like the one, is also connected to the base of the gyroscope. However, the gyroscope connected to this head is not one, but ten. The arrangement of three, four, and three, each of which is the smallest size, is neatly arranged. Not only that, but even after the assembly, the gyro's pointing is exactly the same, this is purely handmade, how to do it? a few
When the master saw this, his eyes were straight and he couldn’t directly rush to grab the road from Lu Zhiming. How did this guy do it? How can it be such a small size with such high precision? What is the surface roughness, what to polish?

Is this polished in the latest issue of
Mechanical Technician
,
Liquid Abrasives for Micro-Precision Parts
?
one of the teachers raised his head and asked Guo Tailai, who was coming over.

Hey?
Guo Tailai was asked by this question, and then looked at Zhao Xiangbei with doubts. It’s not that these masters don’t like CNC or learn, so they have to be eliminated? How do you keep an eye on the latest technical journals? Zhao
To the north is also a doubt, but he still does not move. Guo Tailai did not know why, but he turned back and smiled and replied: "Master, this is my unique method, others can't do it, ordinary people don't have this stability."
It turns out that it is a unique method, or the basic function of stability, then there is no way. The teacher sighed and no longer asked. ten
The smallest size of the gyroscope finally forced the middle-aged people to the road. Watching several masters have shaken their heads and sighed. He looked at several managements who supported him. They just lost their souls. No one can propose a little construction. Sexual opinions come.
Do you admit defeat? So retired to the second line? Middle-aged people bite their teeth, no! It’s hard to manage this status. For many years, the daughter-in-law, Zhao Xiangbei, they want to change the management rules and give young people a chance. How can this be?
"Looking like goods, can't use is not a lie?" The middle-aged man's eyes are red, staring at Zhao Xiangbei, and uttering this question. "
Fat man, take things off and check them on the spot. "Zhao Xiangbei did not look at the middle-aged people, and directly rushed to Guo Tai."
Tailai stepped forward and took the copper rod from Lu Zhiming. He reached out and gently dialed next to the big gyroscope. The gyroscope fell directly on Lu Zhiming’s open hand.
"Be careful, such a sophisticated gyroscope!" The teacher who had just asked questions was distressed to stop. "
Rest assured, the master, this will have to work when it is launched on the rocket. "Turning the other side of the copper rod, Guo Tailai fingers fiddled, and all ten gyroscopes were lightly dropped: "So little vibration, no problem."