Chapter 236: Exaggerated wind must not (on)

"This this……"
In the Justice Square Technology Company, a group of employees looked at the titanium alloy woven ball shades that Guo Tailai had machined, all of which were full of shock. whole
Block titanium alloy, the overall construction, requires a trace of precision, fully satisfied. Not only satisfied, but also over-satisfied. One
A spherical woven ball shade looks almost exactly the same as the promotional image on that ad page. The only difference is that one material is wool and the other is titanium wire. also
There is another difference, that is, the bulb entrance, the finished product that Guo Tailai brought over, did not open the mouth, replaced by a titanium alloy base, under the base of the titanium alloy, you can also see the name signed by the technician. This
It shows that this woven ball shade is the piece of titanium that was taken away that day. The whole is fixed on the base and is integrated with the base.
There are few mechanical designs that have not been used. At first glance, this is the overall processing, and it is not welded after processing. Especially those places where they are entangled, not only the effect of the entanglement of the yarn, but even more terrifying is that the effect of the yarn is made. each
A titanium alloy wire with exactly the same thickness has hairy and very fine fibers, which looks exactly the same as the wool. It is only when people look at it at close range that it is not a wool, but a tiny titanium alloy. fiber.
welding? Not at all, all are processed in one piece. Moreover, even if it is welding, so much more than the hair is not know how many times the titanium alloy fiber filaments are welded up, but also can not be polished to see a trace of welding? Light
It is this woven ballshade that can't tell a word that all the technicians who know the difficulty of processing are shocked. Not to mention the thorns, in fact, even more terrible is that they can't even say the words of praise. They can't even imagine how this is processed, and what kind of machinery can produce such extreme effects.
"Don't watch, hand-processed." Guo Tailai heard the question and smiled and replied: "I said, we just do R&D design, let you squeeze out the ultimate performance. This is a show for everyone, let Everyone understands what I can do and gives you a reference when designing."
When Tailai spoke, a group of people listened honestly and nodded. They were completely different from the group of people who had misunderstood Guo Tailai the day before yesterday. Honestly, they saw the children of the aunt like kindergarten. This
It is also the effect that Guo Tailai wants to achieve. In addition to showing them the craftsmanship, what they want is to be able to shake the technical backbone that they feel is not bad. In the original unit, they must belong to the kind of master who feels uncomfortable, but here, Guo Tailai gives them space to display, but let them know how powerful they are, and they will listen to them in their own words. "
We are responsible for research and development, and we will mass production and mass production. Guo Tailai once again mentioned the topic to this: "But that is what you are going to do with the craftsmanship. When designing, first take out the ultimate technology, and then balance the performance and production balance by process design. "Have
A few are doing the process, and all the words are laughing. Who is technically, who is not willing to do it hard? Unfortunately, if they do process design, they can only do subtraction sometimes. A group of people looked at the sympathy of a few of them, and it was really not so happy to have such a master of processing and production and then study the process flow!
If you see this whole titanium alloy woven ball shade, everyone is shocked to add, then when you see the two chips, everyone has been completely speechless.
Two chips, one packaged and one unpackaged. In front of everyone, let everyone watch. "
This package can be taken and tested on the board. "Guo Tailai pointed out that the packaged pin was particularly long and said to everyone, and then pointed to the one that was not packaged on a circular monocrystalline silicon wafer: "You can check it with a microscope." "put
The chips imported from abroad are carefully stripped of the outer package, and then the circuit is traced one by one with an electron microscope. This has been done since the 1970s until now. Now Guo Tailai directly saves them that step, holding a single crystal silicon directly on the microscope can be.
The pins are particularly long, so that they can be inserted into the standard 8086 slot. Guo Tailai's chip size can be much smaller than the standard 8086. Only this method can be used to plug them in. This test is very simple, a simple control circuit can detect the function, the company has been purchasing various equipments some time ago, and now it is not too easy to find a circuit board that can be tested. a few
Individuals hold two chips each to work. The one that tests the fastest, a small control circuit, sees different switches and different lights to know if they can be used normally. A little more complicated, plus some registers to read the data, calculate some simple formulas, it is easy to test whether the chip is really useful.
As for looking directly at the circuit with a microscope, it is a bit of a hassle. After all, 40,000 transistors, one by one, may have been a long time. However, as long as the first one can be used, their inspection here is not even checking. It is more to determine how much process Guo Tailai used in the process. The chip size is much smaller than the 8086 they know. . It’s amazing. Electricity
The road test is really too fast. Basically, in less than half an hour, the basic test shows that the 8086 chip made by Guo has fully realized the function of the standard 8086 chip. During this time, the group of technicians responsible for observation with an electron microscope was all stupid.
They suspect that they have come to a fake company, or they may not be in the country. With the domestic chip manufacturing standards they have learned, it is impossible to explain why this chip can do this. Is it the latest technology of Intel? The latest release of the Pentium 3 chip is only 0.25 micron process, but what do they see now? This 8086 chip actually reached 50 nanometers, 0.05 micron! More than five times the process technology than the Pentium III!
How can this be? Every technician who has watched and measured it is an incredible expression. The first reaction in the mind is that it is definitely wrong. His eyes are a bit flowery. It should be because of the recent shift to the new company. Yes
It must be the reason. Otherwise, how can you look at it? is not it? Huh? How do everyone feel stressed and have some eyes?