Chapter 810: core

If all the data in this experiment is okay, then it can be put into use and installed on a spacecraft.
Jiang Cheng anxiously looked at Lucy, who was calculating the analysis state, and waited for Lucy to tell him the final result.
The waiting time always passes so slowly, not to mention that this matter is so important to Jiang Cheng.
Fortunately, Lucy's ability in calculation and analysis was very strong, and the results were quickly obtained, and Jiang Cheng did not suffer a long time of frying.
In Jiang Cheng's expectant gaze, Lucy began to report the final result.
The calculation and analysis of all test data are completed, and now the final results are reported.
Experiment No. 126, after seven days of full-load operation, there were no problems. "
And all the feedback data is normal, and the test indicators have reached the design requirements.
So Lucy’s analysis of this experimental engine is that it can be used normally in the universe. It is a very perfect curvature. After hearing Lucy’s words, Jiang Cheng has always been dangling and can finally let it go. Up.
Now Jiang Cheng finally lost all his previous baggage and happily faced the final result.
The seven-day test was a kind of torture for Jiang Cheng, and the feeling of worry was really uncomfortable.
Jiang Cheng was really scared just now, and Lucy told him a bad result.
But in the end, Lucy's analysis results did not disappoint him. He finally succeeded in developing a curvature guide, and it could be put into practical use immediately.
This is the best result for Jiang Cheng, and the follow-up space program can finally continue.
As long as the curvature guide is successfully developed, the technology needed for the spacecraft is almost complete.
The remaining technologies that have not been conquered are only a matter of time for Jiang Cheng.
As long as all the remaining technologies are developed, Jiang Cheng can start to build spacecraft by hand.
The spaceship was something Jiang Cheng dreamed of, and now it's finally time for the dream to come true.
Great, I finally conquered this most difficult bone!
From the tone of Jiang Cheng's speech and his expression, we can know that he is very happy now.
Even speaking, he seemed a little excited, and he was no longer calm as usual.
Jiang Cheng's performance is quite normal now. After working hard in the laboratory for seven months, his final success is certainly worthy of his happiness.
Besides, curvature induction can be said to be the most difficult technology on the spacecraft. Now this technical difficulty has been overcome by Jiang Cheng. This is also worthy of Jiang Cheng's celebration.
However, Jiang Cheng just celebrated for a while, and returned to that state of absolute calm, and began to arrange follow-up work with Lucy.
"Lucy, record all the test data, save all the experimental records of the past few months, and maybe send the design drawings of this curvature engine to the R&D team when they are used in the future, so that they can arrange for manual work. Manufacturing work.
Now that the curvature guide has been designed, it must start the formal manufacturing work.
Jiang Cheng intends to introduce this curvature as a standard configuration on spacecraft in the future.
Before he developed a more advanced curvature channel, this combination was a must-have for all spacecraft, so now the work of manufacturing is about to begin.
After seven months of hard work, Jiang Cheng finally completed the research and development of Curvature Guide.
Next is the final stage of drama, Jiang Cheng is going to work hard for the spacecraft.
After seven months of research, Jiang Cheng finally completed the research on the curvature engine.
During these seven months, Jiang Cheng basically never left his personal laboratory, and basically stayed in the laboratory for food and accommodation.
Although Jiang Cheng’s personal laboratory is actually his home, this kind of research without going out for seven months is still too desperate for Jiang Cheng. Now that the curvature engine has been researched, and the manufacturing process has begun, but Jiang Cheng couldn't relax yet.
Several of the technologies required by the spacecraft have not been researched, and Jiang Cheng is going to get all the technologies in one go this time.
The remaining few core technologies are much lower in difficulty than the curvature engine, and Jiang Cheng is confident to develop them all in one go.
These core technologies are said to be less difficult than the curvature engine, but they are also relatively speaking.
If these technologies were handed over to Jiang Cheng's R&D team, they would not be able to get them out in a few years.
So Jiang Cheng is not the time to relax, he will stay in the laboratory for a few months.
Anyway, Jiang Cheng had been in the laboratory for seven months, and he didn't care about staying longer.
The main reason is that Jiang Cheng couldn't wait too long, and couldn't wait to see the spacecraft appear.
The attraction of the spacecraft to Jiang Cheng was so great that Jiang Cheng did not hesitate to do so.
When Jiang Cheng remembered the appearance of the spaceship, he was full of energy that could not be used up, completely forgetting the fatigue caused by the research in the previous seven months.
So Jiang Cheng continued to invest in research and began to develop the remaining core technologies.
Time passed so slowly, and another five months have passed since the curvature engine was successfully developed.
This time, a whole year has passed since Jiang Cheng was busy with the spacecraft's technology.
Scientific research work is such a waste of time, this is still the case where Jiang Cheng's technology is already very fast.
If you switch to a general R&D team to accept these projects, you will not be able to achieve Jiang Cheng's level within decades.
Although Jiang Cheng has been busy for a whole year, these hours are not lost by waves.
Under Jiang Cheng's unremitting efforts, the remaining technologies have been overcome, and only the last core technology is still under study.
In other words, it took Jiang Cheng a year to complete the very last piece of the universe.
Now, as long as Jiang Cheng has completed the ongoing project, all the technologies needed for the spacecraft will be completed.
This means that Jiang Cheng can start building spaceships soon, and that humans will soon have their own spaceships.
The last core technology related to spacecraft has now entered the final experimental stage.
Jiang Cheng was standing in front of the experimental platform, looking at a piece of equipment on the experimental platform.
The structure of the equipment on the test bench is very complex, consisting of countless different parts.
This complex device is the last core technology and a necessary technology for spacecraft
Lucy, let's start the final test, I can't wait.