Chapter 545: I say no is no good

Last year, Qin Guan drove the exchanged Hummer to the capital, and then gave it to a certain unit to copy it. Who would have thought that after more than half a year, the other party could not do anything.
Therefore, Qin Guan changed his mind. It was difficult for them to make those units imitate this kind of military vehicle, so let him solve it.
The production of heavy trucks in the north is on the right track. For the time being, there is no need to develop a new generation of heavy trucks. The existing products can be produced for five or ten years. Therefore, for the heavy truck factory in the north, an important task is to On the basis of some, make a series of modifications.
For example, the truck gun is one of the development projects, and there is even an armored vehicle based on this all-wheel drive military chassis.
In addition to the secondary development of truck chassis, it is a new project, for example, the off-road vehicle urgently needed by the military.
212. It has been in service for several decades. It is technically outdated. The off-road ability is good, but on the road, it is really impossible to run. At the same time, the gasoline engine is used, which is quite expensive.
The excellent performance of the Hummer chassis has been tested by the Army, and it has long aroused their liking. Unfortunately, it cannot be developed in China. Only its V8 engine is very difficult.
Therefore, Qin Guan had to take over this project this year as a project of the Northern Heavy Truck Plant, code-named Northern Warrior.
In the northern heavy-duty truck plant, this project is progressing very quickly, and various systems continue to make breakthroughs, many of which are of the same level as heavy-duty trucks. Therefore, prototype vehicles have now been manufactured.
The trial run of the prototype car is also very important. Through the trial run, many defects can be exposed, and then continuous improvement.
For example, nowadays, when this car is at high speed, it sometimes knocks intermittently.
"It seems that it is the problem of the following differential. We need to improve the machining accuracy." Heribala said while driving.
Yes, this car was trial-produced by Heriba, and drove by himself. It was fine at low speeds, and its climbing performance was also outstanding. But today, I was on a good road and drove more than 100 kilometers. There was an intermittent knocking sound. This sound came from the differential below. It must be that the gears inside were not accurate enough.
"Our current CNC machine tools are already very tight for the production of current parts. If we reprocess this kind of gears, I am afraid that the production capacity will be insufficient." On the other side of the car, Dayang Masandra said.
She was wearing ordinary mechanic uniforms, and still couldn’t stop her beautiful figure. The two big meat on the front of her chest made her clothes bulging, which made people think of later generations deliberately for shooting. The picture of a female model posing as a mechanic comes.
However, she is a true technician. This northern warrior can complete surveys and maps. In the past few months, the Great Yangma has tried her best. After focusing on work, she rarely finds Heribala at night.
Now, this project has aroused her great interest, but she is still the quality person in charge of the northern heavy truck project. The CNC machine tool is already running at full capacity. Where is the excess capacity to produce new parts?
However, the special bevel gears processed on this ordinary machine tool do not seem to work.
At this moment, Heriba stopped the car.
"Director, there are some guests here, and their luggage is not allowed to be checked, saying it is a state secret." said the guard.
He Ri Bala frowned immediately, what guest?
"Director, we contacted on the phone." Mr. Zhang came up and said, "We came from 114. In this luggage, there are our products."
"Okay, come up." Heribala said.
This luggage looks very heavy, but this warrior has a lot of space, especially for trial installations, so there is a body behind it, and the cover is not covered, just like a pickup truck.
Heribala invited them very politely, and several lads carried their luggage onto the car, and then they were all able to squeeze into the back seat of the warrior.
It's more than two meters wide! And people in this era are so thin.
"Thank you." Zhang Gong said.
"Your project is presided over by Mr. Qin, of course we have to support it." After getting on the car, He Ribala said to Zhang Gong in the back row while driving, "How do you want us to help with processing?"
"I just want to use your CNC machine tools." As Mr. Zhang said, he looked at the Great Yanmar sitting in the co-pilot. Is this foreigner credible? After all, our own development is highly confidential.
"If you want to use a CNC machine, you have to find Sandra." Heribala said to the side: "Sandra, I will trouble you next."
Zhang Gong still wants to keep it secret, but when I hear this, the woman here is also an important person.
"No." Who knows, but Sandra refused.
The people in the back were originally worried about leaking secrets. Who knows, the big Yanmar in front actually disagrees?
"I don't care what the project is, what assistance is, in short, I am the quality director of the factory, I am responsible for the normal operation of the product line, our CNC machine tools, there is no extra time for the production of other projects." Dayang Mar Speaking proficient Chinese.
In these respects, she is very serious, even if Heribala is the director of the factory, even if Heribala is her lover, it cannot violate the principle.
We don’t even have enough for ourselves, so we need to help other units? This is not a question of money. It is a question of ability. Without ability, what else do you promise?
Hearing what Dayang Mar had said, the people behind were stunned. The factory manager couldn't control this woman? What is the origin of this woman, so tough?
Zhang Gong felt angry, but she knew that she had to be patient. You must know that the CNC machine tools here are the most accurate in the country and the world. If you do it here, you will surely do more with less.
Must be patient.
"Our processing can take up to half an hour." Zhang Gong continued: "Just fix some burrs for us."
"No, not for a minute." Although Dayangma has been in Han for a long time, she hasn't learned the Han style. She speaks hard. If you can't, you can just use a file. Here we use CNC machine tools. By the way, what do you say? Isn't this taking off your pants and farting?"
I didn't learn anything else. If this molested person, Dayangma learned it, because when I was with Heribala, when there was fart, he liked to take off his pants and put it on Heribala's head.