Chapter 944: Workshop quality inspector

"President Qin, if the Pyramid nation finally chooses our RB199 engine, we hope that we can also participate in the J-14 project." This visit to Han will come to an end, Stanley said : "We can send a research and development team to help match, or we can send pilots to participate in the test flight together, how about?"
Hearing Stanley's words, Qin Guan had a smile on his face: "Your expenses will be settled by you."
Do you want to get a share? If you have to use your engine, you can join in, but don't expect us to pay for it. You are responsible for your own expenses.
At this time, Qin Guan had already faintly made up his mind. It seemed that the engine matter could not be delayed any longer! It's just that the domestic scientific research personnel are all working on the three-generation heavy-duty engines. Who will do this kind of push?
This is a problem.
After getting off the plane, Kelly was looking forward to it. If her party also came to participate in the test flight, Kelly would already want to sign up.
"Yes, I thought you were scared just now."
"Why? You have good physical fitness. After turning so many times, you can't count it wrong." The two looked at each other and both laughed.
Qin watched in his eyes, huh, I can't let you develop anymore, this year's New Year, it happens to be your marriage!
The New Year's Eve is approaching, and every household is buying new year goods and preparing for the New Year. There is a lively atmosphere on the northern land.
Since the reform and opening up, people’s lives have been getting better year after year. Especially this year, a joint production contract responsibility system has been started in the rural areas. Many people have also started sideline businesses, mining operations, business operations, and transportation. The running and transportation, the life is prosperous.
However, at the Haihe Automobile Plant, production is in full swing, and they are full of enthusiasm.
A joint venture company has been established with the North Heavy Truck Factory, among which the North Heavy Truck Factory holds 51% of Haihe Automobile Factory's shares through capital injection, occupying a dominant position.
In this way, the Haihe Automobile Plant is actually a subsidiary of the Northern Heavy Truck Plant, and after signing the agreement, the Northern Heavy Truck Plant did not delay and immediately began to update the plant.
The factory here is backward. For example, it needs to add new modern equipment to produce vehicles with the world's advanced level!
For example, the newly added stamping equipment has been placed in the stamping workshop. At this time, the equipment has been debugged and is in trial production.
"The car body is an important part in the production of vehicles. On the car body, we use the stamping process to press the steel plates into individual shapes and then weld them together." At this time, in the workshop, Zhang from the Northern Heavy Truck Factory Master, was appointed as the workshop director of the stamping workshop.
Originally Director Wang here has become the deputy director.
Although he became a deputy, he didn't complain in his heart. He knew that people who came from the northern heavy truck factory must have a few hands.
In the past, everyone used a hammer to knock out a qualified body shape, but now, they have begun to use advanced equipment.
Some technical backbones transferred from the northern heavy-duty truck factory have also undertaken important tasks here, as masters, with other apprentices operating together.
Inside the workshop, there was a loud noise. Director Zhang said to the others as he walked:
We must pay attention to safety to prevent production accidents. Every worker is the pillar of the family. If something happens to them, the home will collapse.

The others nodded.
The car body is divided into six parts, front, rear, left, and right, and up and down. These large steel plates are stamped into specific shapes, and then go to the front workshop to weld.
Piece by piece, the stamped steel plates were placed on the cart. Before leaving the workshop, there was a station that was a special inspection station.
The inspectors are all transferred from the northern heavy truck factory. When Director Zhang walked over, he saw a female worker in her twenties.
Women can also hold up half of the sky. In factories, not only male workers have to be hired. In certain positions, female workers are more suitable because female workers are more careful.
The female quality inspector moved a stamped body steel plate on the trolley, and suddenly said: "No. 3 stamping machine, immediately stopped running, there is a problem with the mold! Replace with a new mold, and send the old mold to the mold shop."
After the steel plate is cut, it is placed on the punching machine for punching, and the upper and lower molds are pressed in this way, which is very efficient.
However, after the die has been stamped several hundred pieces, there may be problems, and it needs to be re-ground or replaced with a new die. After all, this is hard to hard, and the die may be deformed during extrusion.
And now, all the stamped body steel plates have problems!
After the last piece was stamped, there was a piece of broken leftover material that fell on the mold table below. As a result, all the next stamped pieces were printed with the shape of this leftover material!
Look at that location, it happens to be the track location of the pull-out door of the van, which cannot be repaired.
After she finished speaking, holding a red marker, drew crosses on the stamped steel plates, and then said: "This batch of parts is scrapped. Please send it to the scrap pile."
what?
At this time, Director Zhang took the other people and just walked here, and heard the female quality inspector say that the steel plates would be scrapped. In an instant, the faces of several people were ugly.
Especially Director Wang, his mouth twitched. This is brand new! Bundles of steel plates are disassembled, then cut into small pieces, and sent to the punching machine for punching. The surface still has the special brightness of galvanized steel. This good-end body steel plate will be scrapped because of a small problem. ?
Isn't this a waste?
Director Wang swallowed and spit, and finally couldn't help it, and said, "This little comrade, our bodywork is just scrapped, isn't it too wasteful?"
He used to be the workshop director, who was high above him. Wherever he went, someone would greet him. Now, he is low and low, coming to say good things to an ordinary workshop quality inspector. I guess it’s okay?
Where do I know, this female worker didn't buy his account at all, and said coldly: "If the quality standard is not met, it needs to be scrapped. This is our quality standard."
Director Wang's face was very ugly.
"This matter will be broadcast throughout the factory. As long as any product has defects, it must never leave the factory and leave the workshop. We must grasp the quality from the source of production and deliver the best products to users." Director Zhang's words also put Director Wang without any face, as if he wanted to treat this as a typical negative.
Isn't this a fuss? Or do you have to deliberately take the new official into office? The people in the factory were dissatisfied.