Chapter 30: Ready to start

罗 In Luo Jia's magical brain, the blueprints of robots are all ready-made and can be used directly.
The main difficulty lies in the compatibility of components. After all, the components used in the design of extraterrestrial civilization and the components that Luo Jia can buy from the earth, regardless of shape and power, must be greatly different.
The key is to learn the design ideas of extraterrestrial civilization. The height of the thought will determine the height of the product.
In this respect, Luo Jia undoubtedly has a considerable advantage. Even if all the robotics experts in the world are added together, it is far more than the folders in Luo Jia's head.
As for the parts, they are all tears.
The main parts of the robot are the harmonic geared motor and RV geared motor.
Harmonic motors have low power and are used to drive small devices such as the eyes and knuckles.
The RV motor has powerful horsepower and drives large equipment such as robot walking.
At present, the main players of these two types of motors in the world are companies from neon countries.
There is a spina company in Germany. The quality of the RV motor produced is good, but the sales volume has been soaring, and it can't compete with the neon counterparts.
The neon emperor, Hamelenko, Sumitomo and several other giant companies have almost completely monopolized the reducer market.
There are more than 200 domestic reducer manufacturers. The more powerful companies include Green, Laifu, Benrun, Hans, Xintuo, Kang Zhen, Qinchuan, Shuanghuan, Hengfengtai, Zhongli Dade and so on.
But it is very desperate that these domestic manufacturers all imitate the design, heat, noise, and service life of Neon Company. In these important technical indicators, they are far behind the giants of Neon.
So Luo Jia had no choice at all. Harmonic deceleration can only be used for Harmonic, and RV deceleration can only be used for Teijin. As for other parts, there are basically no domestic products.
I have to say that in the high-precision machinery industry, China has a long way to go. The accuracy of Teijin reducers can even reach the micron level, which is quite scary.
罗 When Luo Jia was about to enter the robot industry before, he spent a lot of time doing pre-research, and the blueprint was also mostly completed.
He now spends another night to finalize the plan, and then lets Li Moran take himself to the local high-precision processing factory in Wuxi.
As Wuxi, a base city for the electromechanical industry, there are many factories in this area, but most of them do not meet Luo Jia's requirements. In order to ensure quality, Luo Jia's requirements are very strict.
Eventually they found a company called Taidong Precision.
The factory owner is a 50-year-old uncle named Pang Yunhai. He was born as a mechanical engineer in a state-owned enterprise and went into business 20 years ago, specializing in precision parts processing.
Pang Yunhai was very excited to lead Luo Jia and Li Moran and came to two huge five-axis CNC machining centers. "You must haven't seen this, have you? Demaggi CTX2000, and Demaggi CTX4000, giant German." Goods, with the tool magazine, it's almost 18 million. "
"In Wuxi, I want to say that I am second, and no one dares to say that I am the first. No matter how complicated the parts you want, I can get them for you, but the price is not cheap. After all, I use it. But high-end German. "
Luo Luojia shrugged, "Demag's CNC machining center has the highest precision, but their largest shareholder is Neon Guosen Seiki, and its technology has always been cooperating with Neon."
Yun Pang Yunhai did not expect that Luo Jia, who looks very young and also a computer educated guy, still knows mechanics?
Demagee's major shareholder is indeed a neon country. Pang Yunhai brags to others that his machine tools are genuine German products. Only Luo Jia knows that these two machine tools are actually a hybrid of Germany and the neon country.
Luo Jia went on to say, "Although I have no feelings for Neon, but in the field of high-precision CNC machine tools, Germany has actually fallen behind Neon. Even Swiss-made non-standard machine tools are more accurate than German goods. "
"The American artificial F22 uses the neon SNK five-axis dragon boring and milling. The main supplier of Boeing is Yamazaki Mazak. The world's highest precision master machine in the ultra-precision machining field is Jettacote, which specializes in lens manufacturing. , The accuracy is eight times higher than the three major military artifacts. "
"In addition, the neon country also has Amada, Okuma, Makino, Komatsu, Aida, Mitsubishi, Sodick, Citizen, Fujitsu, Fuji, Toshiba, Brother, Tsugami, Ryuzawa, Tosu, Okamoto, Miyano, Huo Cisco, Sugi, Riku Nakamura, Mitsui Seiki, Fenghe, Matsuura, Takamatsu, FANUC, Ikegai, and some other machine tool giants. "
"This powerful lineup is not only in our country, but even the Germans should be amazed. It is also a late-developing country in East Asia. The neon country is really far ahead of us in the field of machinery. I do n’t know how many years To catch up. "
Luo Luojia said very objectively.
It is foolish to be blind and arrogant. When you want to enter an industry, you must first have a clear understanding of the current status of the industry and know where the gap is before you can try to reduce the gap.
Luo Luojia did not spend much time and did a lot of research in this area.
After listening to Luo Jia's words, Pang Yunhai was very emotional. Most people of his age were patriotic. The large number of unbelievable giant companies made Pang Yunhai a little desperate.
"Don't be too pessimistic. The road must be taken step by step. Neon is very strong in the mechanical field, but China's development in the IT field is also good. We are now paying with mobile phones. Neon is still using cash. "Said Luo Jia.
Wu Yi, a young man, and a young man even talked very well. Of course, Luo Jia would not tell Pang Yunhai that he wanted to build a robot. UU reading www.uukanshu.com only said that it would produce robotic arms.
Pang Yunhai patted his chest to guarantee that Luo Jia would mill the best parts, and find the most experienced engineer in the factory to handle Luo Jia's order.
After walking out of Taidong Precision's gate, Li Moran felt that Luo Jia had learned another lesson.
The ghost knows how much industry research Luo Jia has done in the field. He is more confident now. It seems that Luo Jia chose to enter the robot industry at this time and is fully prepared.
Luo Luojia's learning speed is too fast, Li Moran also secretly resolved to go back to make up the mechanical course. In front of this horrible boss, as long as he didn't study for a day, he would fall behind.
After returning, Luo Jia passed the order drawings to Pang Yunhai. The humanoid robot was too dazzling to make too many. Luo Jia planned to make a hundred sets to try first.
But the spare parts cannot be prepared according to one hundred sets, and some spare parts must be set aside, so Luo Jia ordered 120 sets.
There are many other tasks to be prepared. The reducer should be ordered by Teijin and Hamelenko distributors. In addition, Luo Jia is preparing a high-power wireless charging system to solve the problem of robot energy consumption.
With the help of Li Moran, Hong Tao, and other colleagues in the company, Luo Jia spent two days to complete the procedures and purchases, and then asked Li Moran and his colleagues to return to Shanghai to set up a machinery department.
This time, I have to rely on Sha Zhan and Gu Pengdong to come forward and ask Fudan or Jiaotong University for some top talents in the mechanical department.
Xi Hongtao and his two colleagues from the Administration Department stayed at the factory to receive the purchase orders. At the same time, they found someone to overhaul the equipment in the factory and were ready to start construction at any time.
After arranging these things, Luo Jia took the high-speed rail home directly from Wuxi, and was ready to talk with Comrade Luo Ning and let him manage the factory.